Differences

This shows you the differences between two versions of the page.

--- resources:eval:user-guides:inertial-mems:imu:adis16imu1-pcb [21 Aug 2019 03:20] – [Ribbon Cable Options] Mark Looney
+++ resources:eval:user-guides:inertial-mems:imu:adis16imu1-pcb [21 Aug 2019 03:33] – [Connector Part Numbers] Mark Looney
@@ Line 104: / Line 104: @@
 =====JP1 Settings=====
-JP1 controls the ???.
+JP1 controls the power supply to teh VDDRTC function, on the ADIS16375, ADIS16480, ADIS16485 and ADIS16488A products. For all other products, do not install JP1.
 Please use the following table to determine how to use JP1 on the ADIS16IMU1/PCBZ.
@@ Line 138: / Line 139: @@
 ===== INTERFACE CONNECTOR =====
-J1 is the electrical connector that provides direct access to power, ground and critical digital I/O pins on the devices. It is a 16-pin, dual-row, 2-mm pitch connector that support 1mm ribbon cable systems.
+J1 is the electrical connector that provides direct access to power, ground and critical digital I/O pins on the devices. It is a 16-pin, dual-row, 2-mm pitch connector.
 ==== Pin Assignments =====
@@ Line 156: / Line 156: @@
-===== Connector Part Numbers =====
-This section is specific information about the connectors on the [[adi>en/evaluation/eval-adis16imu1/eb.html#buy|ADIS16IMU1/PCBZ]]. These connectors can be ordered thru a number of different electronic distributors including but not limited to:
-  - __Newark__  [[http://www.newark.com/webapp/wcs/stores/servlet/Search?catalogId=15003&langId=-1&storeId=10194&gs=true&st=TMM-108-01-G-D-SM|TMM-108-01-G-D-SM]], [[http://www.newark.com/samtec/clm-112-02-l-d/board-board-conn-socket-24pos/dp/11P3763?MER=PPSO_N_C_EverywhereElse_None|CLM-112-02-L-D]]
-  - __Digi-Key__ [[http://www.digikey.com/product-search/en?vendor=0&keywords=A3-16PA-2SV%2871%29|A3-16PA-2SV(71)]], [[http://www.digikey.com/product-search/en?vendor=0&keywords=TMM-108-01-G-D-SM|TMM-108-01-G-D-SM]], [[http://www.digikey.com/product-detail/en/CLM-112-02-L-D/SAM1129-12-ND/1104290?WT.srch=1&WT.medium=cpc&WT.mc_id=IQ66882670-VQ2-g-VQ6-45013741995-VQ15-1t1-VQ16-c|CLM-112-02-L-D]]
-  - __Sager Electronics__  [[http://www.sager.com/a3-16pa-2sv-71--3616755.html|A3-16PA-2SV(71)]], [[http://www.sager.com/search/?Keywords=TMM-108-01-G-D-SM&x=23&y=16|TMM-108-01-G-D-SM]], [[http://www.sager.com/search/?Keywords=CLM-112-02-L-D&x=20&y=13|CLM-112-02-L-D]]
-  - __Samtec__ [[http://www.samtec.com/my-samtec/pricing.aspx|TMM-108-01-G-D-SM]], [[http://www.samtec.com/my-samtec/pricing.aspx|CLM-112-02-L-D]]
-  - __Mouser__ [[http://www.mouser.com/ProductDetail/Hirose-Connector/A3-16PA-2SV71/?qs=eDUdFcBPps1b6M%252bGHQVEFA==|A3-16PA-2SV(71)]], [[http://www.mouser.com/_/?Keyword=TMM-108-01-G-D-sm&FS=True|TMM-108-01-G-D-SM]], [[|CLM-112-02-L-D]]
-The 1st picture below is J1 P/N A3-16PA-2SV(71)Manufacturer: Hirose. The 2nd picture is an alternative P/N TMM-108-01-G-D-SM Manufacturer: Samtec. The J1 connector is a 16 pin dual row part with a 2mm pitch and plugs into the [[adi>EVAL-ADIS|EVAL-ADIS]] J1 connector.
-<WRAP center round box 60%>
-{{:resources:eval:user-guides:inertial-mems:imu:a3-16pa-2sv_71_.png?400 |}}**Manufacturer:** Hirose
-A3-16PA-2SV(71)
-</WRAP>
-<WRAP center round box 60%>
-{{:resources:eval:user-guides:inertial-mems:imu:tmm-108-01-g-d.png?400 |}}**Manufacturer:** Samtec
-TMM-108-01-G-D-SM
-</WRAP>
-The J2 connector on the [[adi>en/evaluation/eval-adis16imu1/eb.html#buy|ADIS16IMU1/PCBZ]] is where the device plugs into directly or thru a flex cable dependent on the specific part being evaluated. The J2 connector is a 24 pin 1mm Samtec connector P/N CLM-112-02-L-D shown below.
-<WRAP center round box 60%>
-{{:resources:eval:user-guides:inertial-mems:imu:clm-112-02.png?400 |}}**Manufacturer:** Samtec
-CLM-112-02-L-D
-</WRAP>

Wiki

Analog Devices Wiki

Differences

Analog Devices Wiki

Differences

Page Tools