Differences

This shows you the differences between two versions of the page.

--- resources:eval:user-guides:inertial-mems:imu:adis16imu1-pcb [21 Aug 2019 03:19] – [Ribbon Cable Options] Mark Looney
+++ resources:eval:user-guides:inertial-mems:imu:adis16imu1-pcb [21 Aug 2019 03:32] – [INTERFACE CONNECTOR] Mark Looney
@@ Line 104: / Line 104: @@
 =====JP1 Settings=====
-JP1 controls the ???.
+JP1 controls the power supply to teh VDDRTC function, on the ADIS16375, ADIS16480, ADIS16485 and ADIS16488A products. For all other products, do not install JP1.
 Please use the following table to determine how to use JP1 on the ADIS16IMU1/PCBZ.
@@ Line 138: / Line 139: @@
 ===== INTERFACE CONNECTOR =====
-J1 is the electrical connector that provides direct access to power, ground and critical digital I/O pins on the devices. It is a 16-pin, dual-row, 2-mm pitch connector that support 1mm ribbon cable systems.
+J1 is the electrical connector that provides direct access to power, ground and critical digital I/O pins on the devices. It is a 16-pin, dual-row, 2-mm pitch connector.
 ==== Pin Assignments =====
@@ Line 147: / Line 147: @@
 ==== Ribbon Cable Options ====
-Check out the [[https://www.samtec.com/products/tcsd|TCSD series]] from [[https://www.samtec.com|Samtec]], to purchase ribbon cable assemblies, which will mate to J1, on the [[https://www.analog.com/EVAL-adis16imu1||ADIS16IMU1/PCBZ]] and the [[https://www.analog.com/EVAL-ADSIS2|EVAL-ADIS2Z]].
+Check out the [[https://www.samtec.com/products/tcsd|TCSD series]] from [[https://www.samtec.com|Samtec]], to purchase ribbon cable assemblies, which will mate to J1, on the [[https://www.analog.com/EVAL-adis16imu1||ADIS16IMU1/PCB]] and the [[https://www.analog.com/EVAL-ADIS2|EVAL-ADIS2]].

Wiki

Analog Devices Wiki

Differences

Analog Devices Wiki

Differences

Page Tools