This version is outdated by a newer approved version.
This version (10 Dec 2016 00:52) was approved by Mark Looney.The Previously approved version (10 Dec 2016 00:38) is available.
This version (10 Dec 2016 00:52) was approved by Mark Looney.The Previously approved version (10 Dec 2016 00:38) is available.This is an old revision of the document!
Table of Contents
ADIS16ACL2/PCB WIKI GUIDE
OVERVIEW
The ADIS16223 and ADIS16227 products use a 14-pin flexible interface. The mating connector for their interface supports surface-mount solder attachment but does not support direct attachment with ribbon cables. For those who are would like to connect the ADIS16223 and ADIS16227 to an existing processor board, using a ribbon cable, the ADIS16ACL2/PCBZ provides a simple connector translation for this purpose.
ORDERING
To order this breakout board, please visit the ADIS16ACL2/PCBZ's web page
ADIS16223/ADIS16227 Connection
Press the ADIS16223/7 connector onto J2 (14-pin socket).
EVAL-ADIS2 Connection
The EVAL-ADIS2 provides PC-based evaluation support for the ADIS16223 and ADIS16227. J1 on the EVAL-ADIS2Z and the ADIS16ACL2/PCBZ use the same pin assignments, so connecting them requires a 16-pin ribbon cable.
Electrical Schematic
Outer Dimensions
Mounting Holes
resources/eval/user-guides/inertial-mems/imu/adis16acl2-pcb.1481327520.txt.gz · Last modified: 10 Dec 2016 00:52 by Mark Looney