This is an old revision of the document!
The EVAL-ADIS2 is iSensor's second-generation, PC-based evaluation system that supports communication with most ADIS16xxx products, using the “breakout board” evaluation tools for each product. The EVAL-ADIS2 design includes onboard voltage regulation and high-speed USB data transfer built upon the ADSP-BF527 DSP.
Use the links below to learn more about using the EVAL-ADIS2 to evaluate iSensor IMU sensors.
EVAL-ADIS2 Hardware Guide This page walks through setting up the EVAL-ADIS2 for use on a Windows PC and lists the hardware required to connect supported ADIS16xxx devices.
EVAL-ADIS2 IMU Evaluation Software User Guide This page walks through using the legacy IMU evaluation software to record and display inertial sensor data.
EVAL-ADIS2 Vibration Evaluation Software User Guide This page walks through using the legacy evaluation software to record and display vibration sensor data.
ADIS16229 Wireless Vibration Monitoring Demonstration System This page walks through using the EVAL-ADIS2 along with an ADIS16000 and ADIS16229.