Wiki

The most recent version of this page is a draft.DiffThis version (11 Aug 2017 13:43) was approved by Pranit Jadhav.

This is an old revision of the document!


Software Packs & Board Support Package

A modular software framework is provided for quick application prototyping. Based on the application use case, developers need to download the respective software packs.

Please make sure you install CrossCore Embedded Studio 2.6.0 ® before installing any of the below packs

The Cog software development kit consists of these packs

  1. DFP- Device Family Pack for ADuCM4050 - This is a bare minimum pack required to enable working with ADuCM3029 and develop simple applications using the on-chip drivers.
  2. BSP - Board Support Package for EVAL-COG-AD4050LZ - This pack along with the DFP is required to develop applications using the on-board drivers.
  3. SASP - Sensor Application Software Packs - This pack is required only to develop applications using the GEARs. Following Sensor Application are included in the pack.
    • Accelerometer Demo
    • Temperature Sensor Demo
/srv/wiki.analog.com/data/pages/resources/eval/user-guides/eval-cog-ad4050lz/packs_bsp.txt · Last modified: 12 Aug 2017 09:15 by Pranit Jadhav