This version (31 Aug 2017 08:44) was approved by Sreeharsha Srinivas.The Previously approved version (12 Aug 2017 07:54) is available.Diff

Software Packs & Board Support Package

A modular software framework is provided for quick application prototyping. Based on the application use case, developers need to download the respective software packs.

Please make sure you install CrossCore Embedded Studio 2.6.0 ® before installing any of the below packs

The Cog software development kit consists of these packs

  1. DFP- Device Family Pack for ADuCM3029 - This is a bare minimum pack required to enable working with ADuCM3029 and develop simple applications using the on-chip drivers.
  2. BSP - Board Support Package for EV-COG-AD3029LZ - This pack along with the DFP is required to develop applications using the on-board drivers.
  3. SASP - Sensor Application Software Packs - This pack is required only to develop applications using the GEARs. Following Sensor Application are included in the pack.
    • Accelerometer Demo
    • Temperature Sensor Demo
    • Visible Light Sensor Demo
  4. Connectivity Packs - This pack is required to enable BLE connectivity using EV-COG-BLEINTP1Z connectivity Cog.
    • BLE Pack

End of Document


resources/eval/user-guides/eval-cog-ad3029lz/packs_bsp.txt · Last modified: 12 Aug 2017 08:10 by Pranit Jadhav