This version is outdated by a newer approved version.
This version (24 Feb 2022 16:07) was approved by Raquel Grau.
This version (24 Feb 2022 16:07) was approved by Raquel Grau.This is an old revision of the document!
Table of Contents
Installing ADuCM36x Software Pack
The ADuCM36x Software Pack includes the C libraries to develop software for the ADuCM36x family with Keil μVision 5, as well as example code to help develop applications. The Software pack can be installed manually, downloading it from the Keil MDK5 Software Packs website, or it can be installed through the Pack Installer inside Keil μVision 5.
Manual Installation
- Download Analog Devices ADuCM36x Device Support and Examples from Keil MDK5 Software Packs website
- Install the ADuCM36x Pack in the default directory
Figure 1. Manual installation of ADuCM36x Software Pack
Installation Through Keil μVision 5
- Open Keil μVision 5
- Open Pack Installer (See Figure 2)
- Search for 'aducm' in the Search bar
- In the Device list on the left-hand side, select 'ADuCM36x Series'
- In the Packs tab on the right-hand side, expand 'Device Specific'
- Click 'Install' in 'AnalogDevices::ADuCM36x_DFP'
- Accept the License Agreement
Figure 2. Opening Pack Installer
Figure 3. Installing the ADuCM36x Software Pack Trough the Pack Installer
resources/eval/user-guides/eval-aducm360-user-guide/installing_aducm36x_software_pack.1645715265.txt.gz · Last modified: 24 Feb 2022 16:07 by Raquel Grau