Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Last revision Both sides next revision
resources:eval:user-guides:eval-adsd3100-nxz-gui [01 Aug 2021 11:46]
Harshvardhan Bhatia Initial Info
resources:eval:user-guides:eval-adsd3100-nxz-gui [01 Aug 2021 12:22]
Harshvardhan Bhatia Updated mode switching and troubleshooting
Line 21: Line 21:
   * If this option is selected, the first window will show active brightness/​intensity,​ while the second window will show depth   * If this option is selected, the first window will show active brightness/​intensity,​ while the second window will show depth
   * Depth is shown in mm, the user can hover over the image to see real-time depth data   * Depth is shown in mm, the user can hover over the image to see real-time depth data
 +{{ :​resources:​eval:​user-guides:​ab_and_depth.png?​nolink |}}
  
 +==== Mode Switching ====
 +  * If the user wants to switch modes while the camera is running frames:
 +    * Click '​Stop'​
 +    * Select mode in drop down menu
 +    * Click '​Play'​
  
 ==== Point Cloud and Depth ==== ==== Point Cloud and Depth ====
Line 29: Line 35:
     * Click '​Play'​     * Click '​Play'​
   * If this option is selected, the first window will show a point-cloud generated from the depth on the second window.   * If this option is selected, the first window will show a point-cloud generated from the depth on the second window.
-  * The user can orient ​the point cloud by dragging ​the mouse while holding ​the right mouse button +  * Point Cloud Controls: 
-  Click 'Reset View' in the point cloud window to reset the orientation+    * Zoom In/Out 
 +      * Use the mouse wheel and scroll forward to zoom in, scroll backwards to zoom out. 
 +    * Grab image and move it in all directions 
 +      * Hover over the Point Cloud Image and and drag the mouse while the right mouse button ​is pressed. Move slowly 
 +    Rotate image 
 +      * Drage the mouse while pressing the left mouse button 
 +    * Increase / Decrease Point Cloud point size  
 +      * Grab the slider at the bottom of the Point Cloud window ​and move it left or right to decrease or increase ​the point size 
 +    * Reset View 
 +      * Press the “Reset View” button to restore to default image size and position
  
 {{ :​resources:​eval:​user-guides:​adsd3100_viewer_pc_and_depth.png?​nolink |}} {{ :​resources:​eval:​user-guides:​adsd3100_viewer_pc_and_depth.png?​nolink |}}
 +
 +==== Recording ====
 +  * Recording option allows users to save AB, Depth, and PointCloud, and raw frames while viewing the scene
 +  * Select the number of frames to record and click 'Start Recording'​
 +  * In the pop-up window select save location and file format:
 +    * .raw - 
 +    * .fsf -
 +
 +==== Playback ====
 +  * The '​Playback Options'​ menu allows the user to play recorded data
 +  * Click 'Open Recording'​ and select either a '​.raw'​ file or an '​_XYZ.fsf'​ file
 +
 +
 +===== Troubleshooting =====
 +  * Camera not showing up on drop down menu
 +    * Click '​Refresh Devices'​ to get updated list
 +    * Disconnect the camera and quit GUI
 +    * Connect the camera and ensure it shows up on Device Manager
 +    * Start GUI
 +  * GUI stuck
 +    * Typically occurs when mode switching fails. Restart GUI and power cycle camera
 +    * Ensure that camera playback is stopped before switching modes
  
resources/eval/user-guides/eval-adsd3100-nxz-gui.txt · Last modified: 01 Aug 2021 14:01 by Harshvardhan Bhatia