Wiki

This version (12 Feb 2019 00:22) was approved by Sundar Palani.

EVAL-ADPAQ3029 - SHT20 [I2C] demo

  1. Download firmware and Tile application from below
  2. Follow the same steps as given here
  3. In this project, SHT20 (Temperature and Humidity Sensor) is used.
  4. The connections between the SHT20 and the ADPAQ module are made as described below.
    SHT20 Pins GPIO port used ADPAQ Header Pins
    Vcc 3.3V P1-1
    SCL I2C_SCL P2-9
    SDA I2C_SDA P2-8
    Gnd GND P1-10
  5. Build and run the project
  6. The Sensor will give the Temperature value in degree celsius and Humidity in %RH.image

resources/eval/user-guides/eval-adpaq3029/resources/app_sht20.txt · Last modified: 06 Nov 2018 05:26 by Sundar Palani