This version (12 Feb 2019 00:22) was approved by Sundar Palani.

EVAL-ADPAQ3029 - Servo motor demo

Download firmware and Tile application from below

Servo motor Firmware

Tile GUI application
Follow the same steps as given here
In this project, a Servo motor is used.
The connections between the Servo Motor and the ADPAQ module are made as shown below.

Servo motor Pins GPIO port used ADPAQ Header Pins

A 5V P2-1

B P0_1 P2-5

C GND P2-10
Build and run the project
The tile has a “Freq” button and an input value option. We can set the frequency of the servo any value between 0-100 and the servo motor rotates accordingly.image

Wiki