This version is outdated by a newer approved version.
This version (18 Sep 2017 17:29) is a draft.
Approvals: 0/1
This version (18 Sep 2017 17:29) is a draft.Approvals: 0/1
This is an old revision of the document!
Tool Chain Guides
This chapter provides all the necessary steps to get the software environment up and running.
It contains four main sections:
- CrossCore Embedded Studio Download & Installation Guide - Provides all the necessary instructions on how to download and install CrossCore Embedded Studios Interactive Development Environment for ADICUP360 based on Eclipse.
- CrossCore Embedded Studio User Guide - Provides important information about using CrossCore Embedded Studio, such as, the process of importing, building, debugging, and creating user applications for the ADuCM360 microcontroller.
- Using EVAL-ADICUP360 with IAR and Keil IDEs - Provides detailed information how to use the EVAL-ADICUP360 board with IAR Embedded Workbench and Keil µVision.
- EVAL-ADICUP360 Drives and Drivers - Provides detailed information how to use the EVAL-ADICUP360 board USB mass storage drives to load pre-compiled .BIN files or update the firmware on the debugger.
End of Document
resources/eval/user-guides/eval-adicup360/tools.1505748577.txt.gz · Last modified: 18 Sep 2017 17:29 by Brandon Bushey