Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
resources:eval:user-guides:eval-adicup360:reference_designs:demo_cn0216 [12 Dec 2017 21:38] – Brandon Busheyresources:eval:user-guides:eval-adicup360:reference_designs:demo_cn0216 [16 Jan 2018 18:27] – Brandon Bushey
Line 1: Line 1:
-======Weigh Scale Measurement Demo======+====== Weigh Scale Measurement Demo ======
  
-The **ADuCM360_demo_cn0216** is a weigh scale measurement demo project for the EVAL-ADICUP360 base board with additional [[http://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-CN0216-ARDZ.html|EVAL-CN0216-ARDZ shield]], created using the  GNU ARM Eclipse Plug-ins in Eclipse environment. +The **ADuCM360_demo_cn0216** is a weigh scale measurement demo project for the EVAL-ADICUP360 base board with additional [[http://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-CN0216-ARDZ.html|EVAL-CN0216-ARDZ shield]], created using the CrossCore Embedded Studios Interactive Development Environment(IDE).
  
 \\ \\
Line 62: Line 62:
   - Connect your weigh scale to the EVAL-CN0216-ARDZ via **()**, make sure you pay attention to the pinout which can be found on the [[https://wiki.analog.com/resources/eval/user-guides/eval-adicup360/hardware/cn0216#sensor_connector|CN0216 hardware page]].   - Connect your weigh scale to the EVAL-CN0216-ARDZ via **()**, make sure you pay attention to the pinout which can be found on the [[https://wiki.analog.com/resources/eval/user-guides/eval-adicup360/hardware/cn0216#sensor_connector|CN0216 hardware page]].
   - Connect an acceptable 7V-12V power supply into the P11 barrel jack of the EVAL-ADICUP360   - Connect an acceptable 7V-12V power supply into the P11 barrel jack of the EVAL-ADICUP360
-<note important>Extremely important to plug in an acceptable power supply to the barrel jack **P11** to supply power for the **EVAL-CN0216-ARDZ**.  The boards will not work if you try only to power it from the DEBUG_USB or the USER_USB.</note>+<note important>Extremely important to plug in an acceptable power supply to the barrel jack **P11** for the **EVAL-CN0216-ARDZ**.  The boards will not work if you try only to power it from the DEBUG_USB or the USER_USB.</note>
   - Plug in the USB cable from the PC to the EVAL-ADICUP360 base board via the Debug USB.(P14)   - Plug in the USB cable from the PC to the EVAL-ADICUP360 base board via the Debug USB.(P14)
  
resources/eval/user-guides/eval-adicup360/reference_designs/demo_cn0216.txt · Last modified: 14 Mar 2021 09:27 by Zuedmar Arceo

Page Tools