Wiki

This version is outdated by a newer approved version.DiffThis version (13 Jan 2016 22:35) is a draft.
Approvals: 0/1
The Previously approved version (16 Oct 2015 16:43) is available.Diff

This is an old revision of the document!


EVAL-ADXL362-ARDZ Shield

The EVAL-ADXL362-ARDZ shield illustrates the functionality of the ADXL362 - an ultralow power, 3-axis MEMS accelerometer.

The ADXL362 is capable of measuring dynamic acceleration (resulting from motion or shock) as well as static acceleration (gravity). It provides 12-bit output resolution and has three operating ranges, ±2 g, ±4 g, and ±8 g. Additional useful features include an on-chip, 12-bit temperature sensor accurate to ±0.5°, motion triggered wake-up functionality, and and several activity detection modes which makes is ideal for portable low-power instruments.

The EVAL-ADXL362-ARDZ Shield is designed in Arduino Uno R3 format which makes it suitable to used with both Arduino Due (e.g. EVAL-ADICUP360 based board) and Arduino Uno R3 base boards.

This chapter describes the hardware and provides for download the schematics and the layout.

Connectors and Jumper configuration

The EVAL-ADXL362-ARDZ Shield has four jumpers to increase flexibility when stacking systems together. Each jumper and it's purpose is described below.


ADXL_CS_SEL

Configuration Function

Routes ADXL362 CS pin to P0.4/RTS/IRQ1

Routes ADXL362 CS pin to P0.5/CTS/ECLKO


Jumper J2

Configuration Function

Connects LCD reset pin to IOREF pin

Connects LCD reset pin to P0.3/IRQ0/CS1. This allows microcontroller to reset LCD when is needed.

Schematics, PCB Layout, Bill of Materials

Software examples

Navigation - EVAL-ADICUP360

resources/eval/user-guides/eval-adicup360/hardware/adxl362.1452720905.txt.gz · Last modified: 13 Jan 2016 22:35 by Brandon Bushey