Wiki

Below is the source of this page. To edit this source as well as other pages on the wiki, you must login.
====== EVAL-ADXL362-ARDZ Shield ======
The [[adi>EVAL-ADXL362-ARDZ]] shield illustrates the functionality of the [[ADI>ADXL362]] - an ultralow power, 3-axis MEMS accelerometer. 

{{:resources:eval:user-guides:eval-adicup360:hardware:eval-adxl362-ardz.jpg?400 |}}

The [[adi>ADXL362]] is  capable of measuring dynamic acceleration (resulting from motion or shock) as well as static acceleration (gravity). It provides 12-bit output resolution and has three operating ranges, ±2 g, ±4 g, and ±8 g. Additional useful features include an on-chip, 12-bit temperature sensor accurate to ±0.5°, motion triggered wake-up functionality, and and several activity detection modes which makes is ideal for portable low-power instruments. 

The [[adi>EVAL-ADXL362-ARDZ]] Shield is designed in Arduino Uno R3 format which makes it suitable to be used with both Arduino Due (e.g. [[adi>EVAL-ADICUP360]] based board) and Arduino Uno R3 base boards.

<WRAP tip round>The [[adi>EVAL-ADXL362-ARDZ]] board has a large capacitor (C18) on the board which holds charge for the LCD screen.  When power cycling the system, you must wait approximately 5 seconds to allow enough time for the capacitors on the [[adi>EVAL-ADXL362-ARDZ]] board to fully discharge.  This is a power requirement for the [[adi>ADXL362]], which notes in the datasheet that the power rail must come all the way back down to 0V before powering back up. </WRAP>

===== Getting Started Video =====

{{analogTV>4807248650001}}

===== Connectors and Jumper configuration =====
The [[adi>EVAL-ADXL362-ARDZ]] Shield has four jumpers to increase flexibility when stacking systems together.  Each jumper and it's purpose is described below.

{{:resources:eval:user-guides:eval-adicup360:hardware:eval-adxl362-ardz_silkscreen_w-jumper.png?500|}}

\\
==== ADXL_CS_SEL ====
^ Configuration																		^ Function													^
| {{:resources:eval:user-guides:eval-adicup360:hardware:horizontal_jumper_12.png?125| }}| \\ Routes  ADXL362 CS pin to P0.3/IRQ0/CS1 				|
| {{:resources:eval:user-guides:eval-adicup360:hardware:horizontal_jumper_23.png?125| }}| \\ Routes  ADXL362 CS pin to P0.4/RTS/IRQ1 				|

\\
==== LCD_CS_SEL ====
^ Configuration																		^ Function													^
| {{:resources:eval:user-guides:eval-adicup360:hardware:horizontal_jumper_12.png?125| }}| \\ Connects LCD CS pin to P2.2/BM 					|
| {{:resources:eval:user-guides:eval-adicup360:hardware:horizontal_jumper_23.png?125| }}| \\ Connects LCD CS pin to P1.4/PWM2/MISO0. 			|

\\
==== ADXL_INT_SEL ====
^ Configuration																		^ Function													^
| {{:resources:eval:user-guides:eval-adicup360:hardware:vertical_jumper_12.png?65| }}| \\ Connects ADXL362 Interrupt  pin 1 (INT1) to P1.0/IRQ3 					|
| {{:resources:eval:user-guides:eval-adicup360:hardware:vertical_jumper_23.png?65| }}| \\ Connects ADXL362 Interrupt pin 2 (INT2) to P1.0/IRQ3. |

\\
==== LDC_RST_SEL ====
^ Configuration																		^ Function													^
| {{:resources:eval:user-guides:eval-adicup360:hardware:horizontal_jumper_12.png?125| }}| \\ Connects LCD Reset to IOREF 					|
| {{:resources:eval:user-guides:eval-adicup360:hardware:horizontal_jumper_23.png?125| }}| \\ Connects LCD Reset to pin P1.1/IRQ4 | 

\\
===== Schematics, PCB Layout, Bill of Materials =====
<WRAP round 80% download>

[[adi>media/en/reference-design-documentation/design-integration-files/eval-adxl362-ardz-designsupport.zip|EVAL-ADXL362-ARDZ Design & Integration Files]]
  * Schematics 
  * PCB Layout and Mounting Diagram 
  * Bill of Materials 
  * Allegro Project

</WRAP>


===== Software examples =====
  * [[resources:eval:user-guides:eval-adicup360:reference_designs:demo_adxl362|ADICUP360 + ADXL362 Demo]]
  * [[resources:eval:user-guides:eval-adicup3029:reference_designs:demo_adxl362|ADICUP3029 + ADXL362 Wi-Fi Demo]]
  * [[resources:eval:user-guides:arduino-uno:reference_designs:demo_adxl362|Arduino Uno + ADXL362 Demo]]

=====Registration===== 
<WRAP round tip 80% >
Receive software update notifications, documentation updates, view the latest videos, and more when you register your hardware.  [[reg>EVAL-ADXL362-ARDZ?&v=RevD|Register]] to receive all these great benefits and more!</WRAP>

// End of Document //
Analog Devices Wiki

Page Tools
