This version is outdated by a newer approved version.
This version (12 Apr 2019 15:17) was approved by Mircea Caprioru.The Previously approved version (01 Feb 2018 18:08) is available.
This version (12 Apr 2019 15:17) was approved by Mircea Caprioru.The Previously approved version (01 Feb 2018 18:08) is available.This is an old revision of the document!
Application Example Reference Designs
This chapter contains various reference designs available for the base board and the various add on modules. Each sub-section describes the demo program, how to setup the hardware, how to obtain the source code, and finally, how to import the project in the Eclipse workspace and to run it.
The following projects are currently available:
- Blinking LEDs Demo - Shows the basic steps of creating a new project for the EVAL-ADICUP3029 base board, running and debugging the software.
- Command Line Interpreter Demo - A Command Line Interpreter (CLI) demo project for the EVAL-ADICUP3029 base board.
- Accelerometer Demo using Wi-Fi - Illustrates the functionality of the ADXL362 3-axes accelerometer. It works with the EVAL-ADXL362-ARDZ Shield.
- Impact Measurement Demo using Bluetooth - Illustrates the functionality of the ADXL372 3-axis high-g accelerometer. It works with the EVAL-ADXL372-ARDZ Shield.
- PMOD Accelerometer Demo - Illustrates the functionality of the ADXL362 3-axes accelerometer. It works with the PmodACL2 from Digilent.
- Temperature Demo - Weigh Scale measurement example for 4-/6-wire bridge sensors. It works with the EVAL-ADT7420-PMDZ Shield.
- pH Measurement Demo - pH Measurement System with Temperature Compensation that works with the EVAL-CN0326-PMDZ PMOD.
- Toxic Gas(CO) Detection Demo using Bluetooth - Measuring toxic gases using electrochemical sensors that work with the EVAL-CN0357-ARDZ Shield and sending it to a smart device via Bluetooth.
- Visible Light(RBG)Detection Demo - Measuring visible light intensity and spectrum concentration levels without optical filters or other mechanical components using the EVAL-CN0397-ARDZ Shield.
- Soil Moisture and pH Measurement Demo using Wi-Fi - Measures the moisture level and and pH value of different kinds of soil using the EVAL-CN0398-ARDZ Shield and sending the data over Wi-Fi.
- BLE device Documentation - Documentation referring to ADI BLE message format for use with IOTnode mobile application
resources/eval/user-guides/eval-adicup3029/reference_designs.1555075026.txt.gz · Last modified: 12 Apr 2019 15:17 by Mircea Caprioru