Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
resources:eval:user-guides:eval-adicup3029:reference_designs:demo_cn0414 [12 Feb 2019 14:38]
AndreiD1994 Correct application name
resources:eval:user-guides:eval-adicup3029:reference_designs:demo_cn0414 [05 Mar 2019 16:16] (current)
AndreiD1994 Add common serial terminal setup page
Line 57: Line 57:
 ===== Outputting Data ===== ===== Outputting Data =====
  
-==== Serial Terminal Output ==== +{{page>/​wiki/​common#​serial_terminal_setup&​nofooter&​noheader}}
- +
-The program outputs data and **CLI** interface to a serial terminal through **UART**. +
- +
-  - In order to view the data, you must flash the program to the EVAL-ADICUP3029. +
-  - Then follow the UART settings below with the serial terminal program. +
- +
-Following is the UART configuration. +
-    Select COM Port +
-    Baud rate: 115200 +
-    Data: 8 bit +
-    Parity: none +
-    Stop: 1 bit +
-    Flow Control: none +
-\\ +
-The terminal program must interpret new line as **LF** and **local echo** must be enabled.+
  
 ==== Available commands ==== ==== Available commands ====
resources/eval/user-guides/eval-adicup3029/reference_designs/demo_cn0414.txt · Last modified: 05 Mar 2019 16:16 by AndreiD1994