Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
resources:eval:user-guides:eval-adicup3029:reference_designs:demo_blink [30 May 2017 23:01]
Brandon file names, working
resources:eval:user-guides:eval-adicup3029:reference_designs:demo_blink [31 May 2017 22:33] (current)
Brandon added demo requirements
Line 8: Line 8:
 The **ADICUP3029_Blink** project uses [[http://​www.analog.com/​en/​design-center/​evaluation-hardware-and-software/​evaluation-boards-kits/​eval-adicup3029.html| EVAL-ADICUP3029]] which is an Ultra Low Power, Arduino compatible ARM Cortex M3 based platform. The platform support various sensor shields. The **ADICUP3029_Blink** project uses [[http://​www.analog.com/​en/​design-center/​evaluation-hardware-and-software/​evaluation-boards-kits/​eval-adicup3029.html| EVAL-ADICUP3029]] which is an Ultra Low Power, Arduino compatible ARM Cortex M3 based platform. The platform support various sensor shields.
    
 +===== Demo Requirements ​ =====
 +
 +The following is a list of items needed in order to replicate this demo.
 +  * Hardware
 +    * EVAL-ADICUP3029
 +    * Mirco USB to USB cable
 +    * PC or Laptop with a USB port
 +  * Software
 +    * CrossCore Embedded Studio (2.6.0 or higher)
 +    * ADuCM302x DFP (2.0.0 or higher)
 +    * ADICUP3029 BSP (1.0.0 or higher)
 +
 ===== Setting up the Hardware ===== ===== Setting up the Hardware =====
 No specific hardware setup required for this demo No specific hardware setup required for this demo
resources/eval/user-guides/eval-adicup3029/reference_designs/demo_blink.txt · Last modified: 31 May 2017 22:33 by Brandon