Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
resources:eval:user-guides:eval-adicup3029:reference_designs:demo_blink [30 May 2017 23:01] – file names, working Brandon Busheyresources:eval:user-guides:eval-adicup3029:reference_designs:demo_blink [31 May 2017 22:33] – added demo requirements Brandon Bushey
Line 8: Line 8:
 The **ADICUP3029_Blink** project uses [[http://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/eval-adicup3029.html| EVAL-ADICUP3029]] which is an Ultra Low Power, Arduino compatible ARM Cortex M3 based platform. The platform support various sensor shields. The **ADICUP3029_Blink** project uses [[http://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/eval-adicup3029.html| EVAL-ADICUP3029]] which is an Ultra Low Power, Arduino compatible ARM Cortex M3 based platform. The platform support various sensor shields.
    
 +===== Demo Requirements  =====
 +
 +The following is a list of items needed in order to replicate this demo.
 +  * Hardware
 +    * EVAL-ADICUP3029
 +    * Mirco USB to USB cable
 +    * PC or Laptop with a USB port
 +  * Software
 +    * CrossCore Embedded Studio (2.6.0 or higher)
 +    * ADuCM302x DFP (2.0.0 or higher)
 +    * ADICUP3029 BSP (1.0.0 or higher)
 +
 ===== Setting up the Hardware ===== ===== Setting up the Hardware =====
 No specific hardware setup required for this demo No specific hardware setup required for this demo
resources/eval/user-guides/eval-adicup3029/reference_designs/demo_blink.txt · Last modified: 23 Nov 2022 16:27 by Brandon Bushey

Page Tools