This version is outdated by a newer approved version.
This version (25 Sep 2018 13:23) is a draft.
Approvals: 0/1
This version (25 Sep 2018 13:23) is a draft.Approvals: 0/1
This is an old revision of the document!
Table of Contents
EV-COG-ADF7023-9Z User Guide
EV-COG-ADF7023-9Z is an evaluation board to evaluate the ADF7023-J High Performance, Low Power, 902-958MHz ISM Band FSK/GFSK/MSK/GMSK transceiver IC. The EV-COG-AD3029LZ MCU Cog board controls ADF7023-J daughter boards. The daughter board plugs directly into the motherboard to provide a full ADF7023-J development kit for a wide range of applications depending upon the daughterboard selection.
Features
- Directly plugs in to EV-COG-AD3029LZ MCU Cog Board.
- SMA (female type) connector for Whip Antenna.
- Chip antenna available if Whip Antenna is not used.
- Power through MCU Cog board. No external power supply required.
Interface
EV-COG-ADF7023-9Z connects to MCU Cog through a hirose connector available on the daughter board. The motherboard will power up the daughter board, so no other external power supply is required. The daughter board has a testport P2 which can be used to probe logic analyzer to the GPIOs connecting MCU Cog to ADF7023-J.
Primary Side
Secondary Side
Test Port
Schematics, PCB Layout, Bill of Material
resources/eval/user-guides/ev-cog-adf7023-9z.1537874619.txt.gz · Last modified: 25 Sep 2018 13:23 by Pranit Jadhav