This version is outdated by a newer approved version.
This version (25 Sep 2018 12:41) is a draft.
Approvals: 0/1
This version (25 Sep 2018 12:41) is a draft.Approvals: 0/1
This is an old revision of the document!
Table of Contents
EV-COG-ADF7023-9Z User Guide
EV-COG-ADF7023-9Z is an evaluation board to evaluate the ADF7023-J High Performance, Low Power, ISM Band FSK/GFSK/MSK/GMSK transceiver IC. The EV-COG-AD3029LZ evaluation board is a motherboard that controls ADF7023-J daughter boards. The daughter board plugs directly into the motherboard to provide a full ADF7023-J development kit for a wide range of applications depending upon the daughterboard selection. The various available daughter boards can be selected from the following Table 1.
Features
- Directly plugs in to EV-COG-AD3029LZ MCU Cog Board.
- SMA (female type) connector for Whip Antenna.
- Chip antenna available if Whip Antenna is not used.
- Power through MCU Cog board. No external power supply required.
Interface
EV-COG-ADF7023-9Z connects to motherboard through a hirose connector available on the daughter board. The motherboard will power up the daughter board, so no other external power supply is required. The daughter board has a testport P2 which can be used to probe logic analyzer to the GPIOs connecting MCU on the motherboard to ADF7023-J.
resources/eval/user-guides/ev-cog-adf7023-9z.1537872060.txt.gz · Last modified: 25 Sep 2018 12:41 by Pranit Jadhav