This version is outdated by a newer approved version.DiffThis version (12 Aug 2017 09:43) was approved by Pranit Jadhav.

This is an old revision of the document!

Tools and Driver Details

This chapter provides all the necessary steps to download, install, and setup the software environment from Analog Devices. There is also information on the different USB modes and drivers needed.

It contains two main sections:

  1. CrossCore Embedded Studio Download & Install - Provides all the necessary instructions on how to download and install the CrossCore Embedded Studios software development environment.
    • CrossCore Embedded Studio Quickstart Userguide - Provides information about using the CrossCore Embedded Studios IDE, in particular, the process of importing, building, debugging, and creating user applications for the EV-COG-AD4050LZ.
  2. Driver Installation for On-board Debugger (CMSIS DAP) - Provides detailed information how to load pre-compiled .HEX or .BIN files using the USB drive of the EV-COG-AD4050LZ board.

End Document


resources/eval/user-guides/ev-cog-ad4050lz/tools_driver.1502523798.txt.gz · Last modified: 12 Aug 2017 09:43 by Pranit Jadhav