This version is outdated by a newer approved version.DiffThis version (13 Feb 2018 11:31) was approved by Pranit Jadhav.The Previously approved version (12 Aug 2017 09:16) is available.Diff

This is an old revision of the document!

Software Packs & Board Support Package

A modular software framework is provided for quick application prototyping. Based on the application use case, developers need to download the respective software packs.

Please make sure you install either of the below toolchain before installing any of the below packs
  1. IAR Embedded Workbench for ARM 8.20.1 or higher
  2. CrossCore Embedded Studio 2.7.0 ® or higher

The Cog software development kit consists of the following packs:-

  1. Analog Devices ADuCM4x50 Device Support - This is a bare minimum pack required to enable working with ADuCM3029 and develop simple applications using the on-chip drivers.
    • Version History
    1. Version: 3.1.0 - Extended support for IAR Embedded Workbench and Keil uVision. [Latest]
  2. Analog Devices EV-COG-AD4050 Off-Chip Drivers and Examples - This pack along with the DFP is required to develop applications using the on-board drivers.
    • Version History
    1. Version 3.1.0 - Extended support for IAR Embedded Workbench.[Latest]

End Document


resources/eval/user-guides/ev-cog-ad4050lz/packs_bsp.1518507691.txt.gz · Last modified: 13 Feb 2018 08:41 by Pranit Jadhav