This version (24 Apr 2018 19:34) was approved by Sreeharsha Srinivas.The Previously approved version (13 Feb 2018 08:41) is available.Diff

Software Packs & Board Support Package

A modular software framework is provided for quick application prototyping. Based on the application use case, developers need to download the respective software packs.

Please make sure you install either of the below toolchain before installing any of the below packs
  1. IAR Embedded Workbench for ARM 8.20.1 or higher
  2. CrossCore Embedded Studio 2.7.0 ® or higher

The Cog software development kit consists of the following packs:-

  1. Analog Devices ADuCM4x50 Device Support - This is a bare minimum pack required to enable working with ADuCM4050 and develop simple applications using the on-chip drivers.
    • Version History
    1. Version: 3.1.0 - Extended support for IAR Embedded Workbench and Keil uVision. [Latest]
  2. Analog Devices EV-COG-AD4050 Off-Chip Drivers and Examples - This pack along with the DFP is required to develop applications using the on-board drivers.
    • Version History
    1. Version 3.1.0 - Extended support for IAR Embedded Workbench.[Latest]

End Document


resources/eval/user-guides/ev-cog-ad4050lz/packs_bsp.txt · Last modified: 24 Apr 2018 19:34 by Sreeharsha Srinivas