This version is outdated by a newer approved version.
This version (12 Aug 2017 08:31) was approved by Pranit Jadhav.The Previously approved version (12 Aug 2017 08:04) is available.
This version (12 Aug 2017 08:31) was approved by Pranit Jadhav.The Previously approved version (12 Aug 2017 08:04) is available.This is an old revision of the document!
Development Tools & Drivers
This chapter provides all the necessary steps to download, install and setup the software environment from Analog Devices. There is also information on the different USB modes and drivers needed.
It contains three main sections:
- CrossCore Embedded Studio Download & Install - Provides all the necessary instructions on how to download and install the CrossCore Embedded Studio software development environment.
- CrossCore Embedded Studio Quickstart Userguide - Provides information about using the CrossCore Embedded Studio IDE, in particular, the process of importing, building, debugging and creating user applications for the EV-COG-AD3029LZ.
- Driver Installation for On-board Debugger (CMSIS DAP) - Provides detailed information on how to load pre-compiled .HEX or .BIN files using the USB drive of the EV-COG-AD3029LZ board.
- Using EV-COG-AD3029LZ with IAR & Keil IDEs - Provides detailed information on how to use the EV-COG-AD3029LZ board with IAR Embedded Workbench and Keil µVision.
End Document
resources/eval/user-guides/ev-cog-ad3029lz/tools_driver.1502518152.txt.gz · Last modified: 12 Aug 2017 08:09 by Pranit Jadhav