This version (14 Jan 2021 05:20) was approved by Robin Getz.The Previously approved version (06 Sep 2019 08:50) is available.
Table of Contents
Setting Up the Software
Firmware
- Download the hex file from the CN-0507 product page.
- If running an operating system older than Windows 10, install serial driver as in 1. Install mBed windows serial driver...
- You should see DAPLINK in your list of drives.
- Copy the hex file to the DAPLINK drive to load the firmware to the EVAL-ADICUP3029. Note that the DAPLINK drive will disappear for a moment, then reappear after loading the firmware.
GUI
- Download the GUI zip archive from the CN-0507 product page.
- Extract the zip file to your PC.
- Look inside the extracted files and launch the adi-vna-app.exe executable.
resources/eval/user-guides/cn0507-network-analyzer/sw_setup/start.txt · Last modified: 14 Jan 2021 05:12 by Robin Getz