This version (14 Jan 2021 05:20) was approved by Robin Getz.The Previously approved version (06 Sep 2019 08:50) is available.Diff

Setting Up the Software


  1. Download the hex file from the CN-0507 product page.
  2. If running an operating system older than Windows 10, install serial driver as in 1. Install mBed windows serial driver...
  3. You should see DAPLINK in your list of drives.
  4. Copy the hex file to the DAPLINK drive to load the firmware to the EVAL-ADICUP3029. Note that the DAPLINK drive will disappear for a moment, then reappear after loading the firmware.


  1. Download the GUI zip archive from the CN-0507 product page.
  2. Extract the zip file to your PC.
  3. Look inside the extracted files and launch the adi-vna-app.exe executable.
resources/eval/user-guides/cn0507-network-analyzer/sw_setup/start.txt · Last modified: 14 Jan 2021 05:12 by Robin Getz