This version is outdated by a newer approved version.
This version (06 Sep 2019 04:07) was approved by Jhake Zebedee Aquino.The Previously approved version (06 Sep 2019 03:48) is available.
This version (06 Sep 2019 04:07) was approved by Jhake Zebedee Aquino.The Previously approved version (06 Sep 2019 03:48) is available.This is an old revision of the document!
Setting Up the Hardware
- Mount the CN-0507 board over the EVAL-ADICUP3029.
- Connect the EVAL-ADICUP3029 to the Laptop thru a micro USB cable.
- Connect a 6V DC power supply to the CN-0507
resources/eval/user-guides/cn0507-network-analyzer/hw_setup/start.1567735507.txt.gz · Last modified: 06 Sep 2019 04:05 by Jhake Zebedee Aquino