Wiki

This version is outdated by a newer approved version.

This version (05 Aug 2022 10:22) was approved by erbe reyta.The Previously approved version (05 Aug 2022 10:21) is available.

This is an old revision of the document!

This set of instructions will soon go away when the next version of Kuiper Linux is released
Line script to be copied are those found after the '$' symbol
Enter the password “analog” whenever asked for it during the installation process

[sudo] password for analog: analog

After the reboot, open command prompt or terminal again to clone the libad9166-iio from Github

analog@analog:~$ git clone https://github.com/analogdevicesinc/libad9166-iio

Go to libad9166-iio directory

analog@analog:~$ cd libad9166-iio

Install the libad9166-iio

analog@analog:~/libad9166-iio $ cmake ./CMakeLists.txt

analog@analog:~/libad9166-iio $ make

analog@analog:~/libad9166-iio $ sudo make install

Go to python directory

analog@analog:~/libad9166-iio $ cd bindings/python

Install the other requirements needed for CN0511 libad9166-iio

analog@analog:~/python $ sudo pip install -r requirements_dev.txt

analog@analog:~/python $ cmake ./CMakeLists.txt

analog@analog:~/python $ sudo make

analog@analog:~/python $ sudo make install

analog@analog:~ $ sudo python -m pip install git+https://github.com/analogdevicesinc/pyadi-iio/

analog@analog:~$ git clone https://github.com/analogdevicesinc/pyadi-iio

Lastly instl the libatlas-base-dev

analog@analog:~$ sudo apt-get install libatlas-base-dev linux packages

Then choose 'Y' if were asked to continue

After all these requirements has been loaded in the Raspberry Pi, example found in ~/home/analog/pyadi-iio/examples for CN0511 can now be run.

Analog Devices Wiki