Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий
This version is outdated by a newer approved version.DiffThis version (27 Jan 2023 08:50) was approved by Joyce Velasco.The Previously approved version (08 Aug 2022 09:15) is available.Diff

This is an old revision of the document!

Table of Contents

ADI ADRV936x System on Module (SOM) SDR

The ADRV9361-Z7035 and ADRV9364-Z7020 are built on a portfolio of highly integrated System-On-Module (SOMs) based on the Xilinx Zynq®-7000 All Programmable (AP)SoC.

ADRV9361-Z7035 is built on the Analog Devices AD9361 and the Xilinx XC7Z035-L2FBG676I, it is schematically & HDL similar to the AD-FMCOMMS3-EBZ. It requires Vivado license.

ADRV9364-Z7020 is built on the AD9361 and the Xilinx XC7Z020-1CLG400I, it is schematically & HDL similar to the AD-FMCOMMS4-EBZ.

The purpose of the RF SOM is to provide an RF platform to software developers, system architects, product developers, etc, who want a single platform which operates over a wide tuning range (70 MHz – 6 GHz) that is capable of both being used for prototype, evaluation and reference design to help with production volume.

Table of Contents

  1. Introduction
    1. Introduction to boards based on the AD9361
    2. Introduction to ADRV9361-Z7035
  2. Hardware
    1. Schematic and Layout revisions
    2. Power and Sequencing
    3. Performance
    4. Electrical specifications
    5. Cable brackets
    6. Additional information
    7. Certifications and Environmental Testing
  3. Carriers
    1. FMC Carrier (ADRV1CRR-FMC)
    2. Breakout Carrier (ADRV1CRR-BOB)
    3. PCIe Carrier (PZSDRCC-PCIE)
    4. PackRF Carrier (PZSDRCC-PackRF)
  4. Use the RF SOM Hardware to better understand the AD9361
    1. What you need to get started
    2. Quick Start Guides
      1. Linux on RF SOM
      2. Configure a pre-existing SD-Card
      3. Update the old card you received with your hardware
    3. Linux Applications
      1. IIO Scope
      2. AD9361 Control IIO Scope Plugin
      3. AD9361 Advanced Control IIO Scope Plugin
      4. Command Line/Shell scripts
    4. Push custom data into/out of the RF SOM SDR.
      1. Basic Data files and formats
      2. Create and analyze data files in MATLAB
      3. Stream data into/out of MATLAB
      4. AD9361 libiio streaming example
  5. Design with the AD9361
    1. Understanding the AD9361
      1. AD9361 Product page
      2. Full Datasheet and chip design package
      3. MATLAB Filter Design Wizard for AD9361
    2. Tuning the AD9361/AD9364
    3. Simulation
      1. MathWorks SimRF Models of the AD9361
    4. Hardware in the Loop / How to design your own custom BaseBand
      1. MATLAB/Simulink Examples
        1. Stream data into/out of MATLAB
        2. Beacon Frame Receiver Example
        3. QPSK Transmit and Receive Example
        4. LTE Transmit and Receive Example
        5. ADS-B Airplane Tracking Example
        6. AGC Optimization Example
      2. GNU Radio
      3. FM Radio/Tuner (listen to FM signals on the HDMI monitor)
      4. C example
    5. Targeting
      1. Analog Devices BSP for MathWorks HDL Workflow Advisor
    6. Complete Workflow
      1. ADS-B Airplane Tracking Tutorial
      2. Frequency Hopping Controller
      3. QPSK Modem Design Workflow
      4. Implementing a Loopback Delay Estimation Algorithm
    7. Design a custom AD9361 based platform
      1. Linux software
        1. Linux Device Driver
        2. Build the demo on ZC702, ZC706, or ZED from source
        3. Build the demo on KC705 or VC707 for Microblaze from source
        4. Build the 2014_R2 Release Linux kernel from source
        5. Customizing the devicetree on the target
      2. No-OS Driver
      3. HDL Reference Design which you must use in your FPGA.
        1. Digital Interface Timing Validation
  6. Additional Documentation about SDR Signal Chains
    1. The math behind the RF
  7. Help and Support
  8. Videos and Webinars
    1. Radio Deployment on SoC Platforms

Warning

All the products described on this page include ESD (electrostatic discharge) sensitive devices. Electrostatic charges as high as 4000V readily accumulate on the human body or test equipment and can discharge without detection.

Although the boards feature ESD protection circuitry, permanent damage may occur on devices subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality. This includes removing static charge on external equipment, cables, or antennas before connecting to the device.

resources/eval/user-guides/adrv936x_rfsom.1674805772.txt.gz · Last modified: 27 Jan 2023 08:49 by Joyce Velasco

Page Tools