This version is outdated by a newer approved version.
This version (16 Feb 2019 06:19) was approved by Robin Getz.The Previously approved version (07 Dec 2017 18:34) is available.
This version (16 Feb 2019 06:19) was approved by Robin Getz.The Previously approved version (07 Dec 2017 18:34) is available.This is an old revision of the document!
Table of Contents
ADRV9361-Z7035 User Guide - Introduction
The ADRV9361-Z7035 is a Software Defined Radio (SDR) that combines the Analog Devices AD9361 integrated RF Agile Transceiver™ with the Xilinx Z7035 Zynq®-7000 All Programmable SoC in a small system-on-module (SOM) footprint suitable for end-product integration.
Analog Devices carrier cards are available for fast prototype and are supported by robust simulation and code generation tools that integrate seamlessly with Xilinx Vivado® Design Suite. The final step for most applications includes designing a custom carrier card to mate with the ADRV9361 SDR SOM for end product deployment.
Key Features
- Low-power: Designed with a -2LI version of the Zynq SoC (low power, mid speed, industrial temp), DDR3L, and high-efficiency voltage regulators with margining capability to scale power with performance. Built-in sequencing and monitoring make it easy to power to the module.
- High bandwidth data connectivity: Move data quickly with dual Gigabit Ethernet, USB2.0, four 6.6 Gb/s serial links (PCIe x4, SFP+, others), and high-speed LVDS I/O for custom interfaces.
- Wideband, frequency agile RF: Uses the AD9361 to provide a highly integrated radio that enables wideband 2×2 MIMO receive and transmit paths from 70 MHz to 6.0 GHz with tunable channel bandwidth <200kHz to 56MHz.
- Programmable SoC: Embedded processing with the Zynq Z-7035 SoC provides a Dual ARM® Cortex™-A9 MPCore™ running at 800MHz, with built in peripherals like USB, Gigabit Ethernet, and memory interfaces.
- Small form factor: 100mm x 62mm footprint, compliant with DP10062 “Sick of Beige v1.0 DP10062 “Sick of Beige v1.0” enclosures from dangerousprototypes.com.
- Production-ready module: System-on-Module designed for immediate prototype and quick integration in your end application. Industrial temperature rated and tested against MIL-STD 202G methods for Thermal, Vibration, and Shock.
- Operating systems: Comes with Analog Devices Linux reference design for Zynq, bootable from an SD card. Also supports Linux, Android, FreeRTOS, eCos, VxWorks, and others listed here.
- Development tools: A broad range of SDR prototype and development environments are supported, including Analog Devices Linux Applications, and MATLAB® and Simulink® for data streaming and Zynq targeting.
- Open-source code: Analog Devices provides precompiled reference designs on the ADRV9361 Wiki Page and a source code support package hosted on Github, including the HDL and software code.
Module Specs
The module specifications are summarized below. The rest of the document provides details.
| Radio | |
|---|---|
| RF Band | 70MHz to 6.0GHz |
| Tunable Channel BW | <200kHz to 56MHz |
| RF Connections | 4 TX, 4RX, 2 TX monitor |
| Max output power | 6.5 – 8.0 dBm (typical) – see AD9361 datasheet for details |
| Max input power (RX) | 2.5 dBm (peak) |
| Max input power (TX mon.) | 9 dBm (peak) |
| Processing | Xilinx Zynq XC7Z035-L2 FBG676I AP SoC |
| Processor | Dual ARM® Cortex™-A9 MPCore™ running at 800MHz |
| Programmable Logic | 275K Kintex-7 logic cells with 900 DSP48 slices |
| Interface | Four 100-pin Micro Headers |
| Peripherals | ARM: Gigabit Ethernet, USB2.0, UART, SDIO |
| User I/O | 209 single-ended or 93 LVDS (up to 1250 or 1400 Mb/s DDR) |
| Serial transceivers | 4 Zynq GTX channels @ 6.6Gb/s |
| Memory | |
| DDR3L | 1GB DDR3L (low power) @ 1,066 Mb/s |
| Flash | 256 Mb QSPI Flash (bootable) @ 400Mb/s |
| SD card | Lockable Micro SD Card cage (bootable) @ 25MB/s |
| Power Consumption | < 5Watts (typical) |
| Main Module Supply | 4.5V – 5.5V (5.0V nominal) |
| Module I/O Supplies | 1.0V – 3.3V |
| Operating system support | Linux, Android, FreeRTOS, eCos, VxWorks, and others |
| Debug | JTAG |
| Dimensions | 100mm x 62mm |
| Operating Temp Industrial | -40°C to +85°C (1) |
(1) uSD cage rated to -25°C to +85°C operating temperature
Important! ADRV9361-Z7035 is not pin compatible with standard PicoZed (non-SDR) carrier cards. New pinouts were required mainly for the Zynq Z-7035 and AD9361 digital I/O.
Simplified System Diagram
ADRV9361-Z7035 SOM Device Callout
resources/eval/user-guides/adrv936x_rfsom/user-guide/introduction.1550294381.txt.gz · Last modified: 16 Feb 2019 06:19 by Robin Getz