Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
resources:eval:user-guides:adrv9009-zu11eg:quick-start-guide [20 Aug 2021 09:11]
Michael Hennerich [ADRV9009-ZU11EG Specific Boot Files]
resources:eval:user-guides:adrv9009-zu11eg:quick-start-guide [18 Aug 2022 16:28]
Michael Hennerich [Messages]
Line 17: Line 17:
   * SD Card 8GB imaged using the instructions here: [[resources:​tools-software:​linux-software:​zynq_images|Zynq & Altera SoC Quick Start Guide]]   * SD Card 8GB imaged using the instructions here: [[resources:​tools-software:​linux-software:​zynq_images|Zynq & Altera SoC Quick Start Guide]]
   * A UART terminal (Putty/Tera Term/​Minicom,​ etc.), Baud rate 115200 (8N1).   * A UART terminal (Putty/Tera Term/​Minicom,​ etc.), Baud rate 115200 (8N1).
- 
- 
-==== Pre-release SD Card Creation ==== 
- 
-The project will be release as part of 2019_r1 release.Before then, the SD image for 2018_r2 can be used.  
- 
-==== Writing the SD Card ==== 
- 
-Details on how to write the SD card can be found here: [[resources:​tools-software:​linux-software:​zynq_images|Zynq & Altera SoC Quick Start Guide]] including the 2018_R2 image. 
- 
-==== ADRV9009-ZU11EG Specific Boot Files ==== 
  
 Please use the [[:​resources:​tools-software:​linux-software:​zynq_images | Please use the Image 28 July 2021 release candidate (2019_R2) or later]] Please use the [[:​resources:​tools-software:​linux-software:​zynq_images | Please use the Image 28 July 2021 release candidate (2019_R2) or later]]
Line 77: Line 66:
 <​code>​ <​code>​
 Xilinx Zynq MP First Stage Boot Loader ​ Xilinx Zynq MP First Stage Boot Loader ​
-Release ​2018.  ​Jun 14 2019  ​-  ​10:06:14+Release ​2021.  ​Aug  3 2022  ​-  ​11:00:01
  
  
-U-Boot 2018.01-21435-g099c929 ​(May 28 2019 08:42:11 +0000) Analog Devices Inc. ADR9009-ZU11EG+U-Boot 2018.01-21439-gd244ce5 ​(Mar 28 2021 13:30:43 +0100) Analog Devices Inc. ADR9009-ZU11EG, Build: jenkins-development-build_uboot-3
  
 I2C:   ready I2C:   ready
Line 97: Line 86:
 I2C EEPROM MAC address read failed I2C EEPROM MAC address read failed
  
-Warning: ethernet@ff0b0000 (eth1) using random MAC address - da:3c:6d:34:48:50+Warning: ethernet@ff0b0000 (eth1) using random MAC address - c6:bd:2a:d9:e2:01
 eth1: ethernet@ff0b0000ZYNQ GEM: ff0e0000, phyaddr 0, interface rgmii-id eth1: ethernet@ff0b0000ZYNQ GEM: ff0e0000, phyaddr 0, interface rgmii-id
 I2C EEPROM MAC address read failed I2C EEPROM MAC address read failed
  
-Warning: ethernet@ff0e0000 (eth0) using random MAC address - 1e:d5:da:08:37:fe+Warning: ethernet@ff0e0000 (eth0) using random MAC address - aa:cd:e8:38:80:de
 , eth0: ethernet@ff0e0000 , eth0: ethernet@ff0e0000
 Hit any key to stop autoboot: ​ 0  Hit any key to stop autoboot: ​ 0 
Line 107: Line 96:
 mmc0 is current device mmc0 is current device
 Device: sdhci@ff170000 Device: sdhci@ff170000
-Manufacturer ID: 3 +Manufacturer ID: 41 
-OEM: 5344 +OEM: 3432 
-Name: SU08G +Name: SD16G 
 Tran Speed: 50000000 Tran Speed: 50000000
 Rd Block Len: 512 Rd Block Len: 512
 SD version 3.0 SD version 3.0
 High Capacity: Yes High Capacity: Yes
-Capacity: ​7.GiB+Capacity: ​14.GiB
 Bus Width: 4-bit Bus Width: 4-bit
 Erase Group Size: 512 Bytes Erase Group Size: 512 Bytes
 reading uEnv.txt reading uEnv.txt
-376 bytes read in 16 ms (22.KiB/s)+407 bytes read in 21 ms (18.KiB/s)
 Loaded environment from uEnv.txt Loaded environment from uEnv.txt
 Importing environment from SD ... Importing environment from SD ...
Line 124: Line 113:
 Copying Linux from SD to RAM... Copying Linux from SD to RAM...
 ** No boot file defined ** ** No boot file defined **
 +SF: Detected n25q512a with page size 512 Bytes, erase size 128 KiB, total 128 MiB
 +device 0 offset 0x2000000, size 0x20000
 +SF: 131072 bytes @ 0x2000000 Read: OK
 reading system.dtb reading system.dtb
-62255 bytes read in 19 ms (3.MiB/s)+79158 bytes read in 32 ms (2.MiB/s)
 reading Image reading Image
-16228864 ​bytes read in 1045 ms (14.MiB/s)+32514560 ​bytes read in 2084 ms (14.MiB/s)
 ## Flattened Device Tree blob at 04000000 ## Flattened Device Tree blob at 04000000
    ​Booting using the fdt blob at 0x4000000    ​Booting using the fdt blob at 0x4000000
-   ​Loading Device Tree to 000000000ffed000, end 000000000ffff32e ​... OK+   ​Loading Device Tree to 000000000ffe9000, end 000000000ffff535 ​... OK
  
 Starting kernel ... Starting kernel ...
  
-[    0.000000] Booting Linux on physical CPU 0x0 +[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] 
-[    0.000000] Linux version ​4.14.0-12222-g6598c88 ​(michael@mhenneri-D06) (gcc version 6.2.1 20161114 ​(Linaro ​GCC Snapshot 6.2-2016.11)) #2783 SMP Fri Jun 14 15:35:26 CEST 2019 +[    0.000000] Linux version ​5.10.0-98248-g1bbe32fa5182 ​(jenkins@romlxbuild1.adlk.analog.com) (aarch64-xilinx-linux-gcc.real (GCC) 10.2.0, 2 
-[    ​0.000000] Boot CPU: AArch64 Processor [410fd034] +[    0.000000] Machine model: Analog Devices ADRV9009-ZU11EG ​Rev.B
-[    0.000000] Machine model: Analog Devices ADRV9009-ZU11EG+
 [    0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '​115200n8'​) [    0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '​115200n8'​)
-[    0.000000] bootconsole [cdns0] enabled +[    0.000000] ​printk: ​bootconsole [cdns0] enabled
-[    0.000000] efi: Getting EFI parameters from FDT:+
 [    0.000000] efi: UEFI not found. [    0.000000] efi: UEFI not found.
 [    0.000000] cma: Reserved 256 MiB at 0x0000000070000000 [    0.000000] cma: Reserved 256 MiB at 0x0000000070000000
 +[    0.000000] Zone ranges:
 +[    0.000000] ​  ​DMA ​     [mem 0x0000000000000000-0x000000003fffffff]
 +[    0.000000] ​  ​DMA32 ​   [mem 0x0000000040000000-0x00000000ffffffff]
 +[    0.000000] ​  ​Normal ​  [mem 0x0000000100000000-0x000000087fffffff]
 +[    0.000000] Movable zone start for each node
 +[    0.000000] Early memory node ranges
 +[    0.000000] ​  ​node ​  0: [mem 0x0000000000000000-0x000000007fffffff]
 +[    0.000000] ​  ​node ​  0: [mem 0x0000000800000000-0x000000087fffffff]
 +[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000087fffffff]
 [    0.000000] psci: probing for conduit method from DT. [    0.000000] psci: probing for conduit method from DT.
 [    0.000000] psci: PSCIv1.1 detected in firmware. [    0.000000] psci: PSCIv1.1 detected in firmware.
 [    0.000000] psci: Using standard PSCI v0.2 function IDs [    0.000000] psci: Using standard PSCI v0.2 function IDs
 [    0.000000] psci: MIGRATE_INFO_TYPE not supported. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
-[    0.000000] ​randomfast init done +[    0.000000] ​psciSMC Calling Convention v1.2 
-[    0.000000] percpu: Embedded ​21 pages/​cpu ​@ffffffc87ff56000 s45080 ​r8192 d32744 u86016+[    0.000000] percpu: Embedded ​22 pages/​cpu ​s49496 ​r8192 d32424 u90112
 [    0.000000] Detected VIPT I-cache on CPU0 [    0.000000] Detected VIPT I-cache on CPU0
-[    0.000000] CPU features: ​enabling workaround for ARM erratum 845719+[    0.000000] CPU features: ​detected: ​ARM erratum 845719
 [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1034240 [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1034240
-[    0.000000] Kernel command line: console=ttyPS0,​115200 root=/​dev/​mmcblk0p2 rw earlycon rootfstype=ext4 rootwait ​root=/​dev/​mmcblk0p2 rw rootwait +[    0.000000] Kernel command line: console=ttyPS0,​115200 root=/​dev/​mmcblk0p2 rw earlycon rootfstype=ext4 rootwait ​clk_ignore_unused cpuidl1 
-[    0.000000] ​PID hash table entries: ​4096 (order: ​332768 bytes) +[    0.000000] ​Dentry cache hash table entries: ​524288 ​(order: ​104194304 ​bytes, linear
-[    0.000000] ​Dentry ​cache hash table entries: ​524288 ​(order: ​104194304 ​bytes) +[    0.000000] ​Inode-cache hash table entries: ​262144 ​(order: ​92097152 ​bytes, linear
-[    0.000000] ​Inode-cache hash table entries262144 (order92097152 bytes) +[    0.000000] ​mem auto-initstack:offheap alloc:off, heap free:off 
-[    0.000000] software IO TLB [mem 0x6bfff000-0x6ffff000] (64MB) ​mapped at [ffffffc06bfff000-ffffffc06fffefff] +[    0.000000] software IO TLB: mapped ​[mem 0x000000003bfff000-0x000000003ffff000] (64MB) 
-[    0.000000] Memory: ​3783916K/4194304K available (10108K ​kernel code, 744K rwdata, ​4432K rodata, ​512K init, 2156K bss, 148244K reserved, 262144K cma-reserved) +[    0.000000] Memory: ​3761492K/4194304K available (15488K ​kernel code, 1672K rwdata, ​11952K ​rodata, ​2496K init, 507K bss, 170668K ​reserved) 
-[    0.000000] ​Virtual kernel memory layout: +[    0.000000] ​rcu: Hierarchical RCU implementation. 
-[    0.000000] ​    ​modules : 0xffffff8000000000 - 0xffffff8008000000 ​  ​( ​  128 MB) +[    0.000000] ​rcu:     RCU event tracing is enabled. 
-[    0.000000] ​    ​vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ​  ​( ​  250 GB) +[    0.000000] ​rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. 
-[    0.000000] ​      .text : 0xffffff8008080000 - 0xffffff8008a60000 ​  ( 10112 KB) +[    0.000000] ​rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. 
-[    0.000000] ​    ​.rodata : 0xffffff8008a60000 - 0xffffff8008ec0000 ​  ​( ​ 4480 KB) +[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16,​ nr_cpu_ids=4
-[    0.000000] ​      .init : 0xffffff8008ec0000 - 0xffffff8008f40000 ​  ​( ​  512 KB) +
-[    0.000000] ​      .data : 0xffffff8008f40000 - 0xffffff8008ffa200 ​  ​( ​  745 KB) +
-[    0.000000] ​       .bss : 0xffffff8008ffa200 - 0xffffff8009215430 ​  ​( ​ 2157 KB) +
-[    0.000000] ​    ​fixed ​  : 0xffffffbefe7fd000 - 0xffffffbefec00000 ​  ​( ​ 4108 KB) +
-[    0.000000] ​    PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ​  ​( ​   16 MB) +
-[    0.000000] ​    ​vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ​  ​( ​    4 GB maximum) +
-[    0.000000] ​              ​0xffffffbf00000000 - 0xffffffbf1dc00000 ​  ​( ​  476 MB actual) +
-[    0.000000] ​    ​memory ​ : 0xffffffc000000000 - 0xffffffc880000000 ​  ( 34816 MB) +
-[    0.000000] ​Hierarchical RCU implementation. +
-[    0.000000] ​ RCU event tracing is enabled. +
-[    0.000000] ​ RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. +
-[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16,​ nr_cpu_ids=4+
 [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
 [    0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000 [    0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
 [    0.000000] GIC: Using split EOI/​Deactivate mode [    0.000000] GIC: Using split EOI/​Deactivate mode
 +[    0.000000] random: get_random_bytes called from start_kernel+0x31c/​0x550 with crng_init=0
 [    0.000000] arch_timer: cp15 timer(s) running at 33.33MHz (phys). [    0.000000] arch_timer: cp15 timer(s) running at 33.33MHz (phys).
-[    0.000000] clocksource:​ arch_sys_counter:​ mask: 0xffffffffffffff max_cycles: ​0x7b0074340, max_idle_ns: ​440795202884 ​ns +[    0.000000] clocksource:​ arch_sys_counter:​ mask: 0xffffffffffffff max_cycles: ​0x7b00c47c0, max_idle_ns: ​440795202120 ​ns 
-[    0.000003] sched_clock:​ 56 bits at 33MHz, resolution 30ns, wraps every 2199023255543ns +[    0.000003] sched_clock:​ 56 bits at 33MHz, resolution 30ns, wraps every 2199023255541ns 
-[    0.008323] Console: colour dummy device 80x25 +[    0.008361] Console: colour dummy device 80x25 
-[    0.012388] Calibrating delay loop (skipped), value calculated using timer frequency.. 66.66 BogoMIPS (lpj=133332+[    0.012394] Calibrating delay loop (skipped), value calculated using timer frequency.. 66.66 BogoMIPS (lpj=133333
-[    0.022669] pid_max: default: 32768 minimum: 301 +[    0.022667] pid_max: default: 32768 minimum: 301 
-[    0.027357] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) +[    0.027374] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear
-[    0.033923] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) +[    0.034613] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear
-[    0.041603] ASID allocator initialised with 65536 entries +[    0.043179rcu: Hierarchical SRCU implementation. 
-[    0.046417] Hierarchical SRCU implementation. +[    0.047369] EFI services will not be available. 
-[    0.051074] EFI services will not be available. +[    0.051756] smp: Bringing up secondary CPUs ... 
-[    0.055220] zynqmp_plat_init Platform Management API v1.1 +[    0.056463] Detected VIPT I-cache on CPU1 
-[    0.060557] zynqmp_plat_init Trustzone version v1.0 +[    0.056501] CPU1: Booted secondary processor ​0x0000000001 ​[0x410fd034
-[    0.065496] smp: Bringing up secondary CPUs ... +[    0.056844] Detected VIPT I-cache on CPU2 
-[    0.070160] Detected VIPT I-cache on CPU1 +[    0.056866] CPU2: Booted secondary processor ​0x0000000002 ​[0x410fd034
-[    0.070191] CPU1: Booted secondary processor [410fd034+[    0.057182] Detected VIPT I-cache on CPU3 
-[    0.070481] Detected VIPT I-cache on CPU2 +[    0.057203] CPU3: Booted secondary processor ​0x0000000003 ​[0x410fd034
-[    0.070501] CPU2: Booted secondary processor [410fd034+[    0.057245] smp: Brought up 1 node, 4 CPUs 
-[    0.070781] Detected VIPT I-cache on CPU3 +[    0.091606] SMP: Total of 4 processors activated. 
-[    0.070801] CPU3: Booted secondary processor [410fd034+[    0.096278] CPU features: detected: 32-bit EL0 Support 
-[    0.070847] smp: Brought up 1 node, 4 CPUs +[    0.101382] CPU features: detected: CRC32 instructions 
-[    0.101470] SMP: Total of 4 processors activated. +[    0.106518] CPU: All CPU(s) started at EL2 
-[    0.106143] CPU features: detected ​feature: 32-bit EL0 Support +[    0.110562] alternatives:​ patching kernel code 
-[    0.111941] CPU: All CPU(s) started at EL2 +[    0.115944] devtmpfs: initialized 
-[    0.116012] alternatives:​ patching kernel code +[    0.125323] Registered cp15_barrier emulation handler 
-[    0.121177] devtmpfs: initialized +[    0.125372] Registered setend emulation handler 
-[    0.130834] clocksource:​ jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:​ 7645041785100000 ns +[    0.129346] clocksource:​ jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:​ 7645041785100000 ns 
-[    0.134930] futex hash table entries: 1024 (order: ​5131072 ​bytes) +[    0.138935] futex hash table entries: 1024 (order: ​465536 bytes, linear
-[    0.147153xormeasuring software checksum speed +[    0.151744pinctrl coreinitialized pinctrl subsystem 
-[    0.185224   ​8regs ​     ​2047.000 MB/sec +[    0.152337NETRegistered protocol family 16 
-[    0.225258   ​8regs_prefetch ​1825.000 MB/sec +[    0.156729DMApreallocated 512 KiB GFP_KERNEL pool for atomic allocations 
-[    0.265293   ​32regs ​   ​ ​2516.000 MB/sec +[    0.162816DMApreallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations 
-[    0.305326   ​32regs_prefetch ​2114.000 MB/sec +[    0.170539DMApreallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations 
-[    0.305355xorusing function: 32regs ​(2516.000 MB/sec+[    0.178353auditinitializing netlink subsys ​(disabled
-[    0.309731pinctrl coreinitialized pinctrl subsystem +[    0.183803audittype=2000 audit(0.116:1)state=initialized audit_enabled=res=
-[    ​0.315353] NETRegistered protocol family 16 +[    0.184104] hw-breakpoint:​ found 6 breakpoint and 4 watchpoint registers. 
-[    0.320133] cpuidleusing governor menu +[    0.198177ASID allocator initialised with 65536 entries 
-[    ​0.323806] vdso: 2 pages (code @ ffffff8008a66000,​ 1 data @ ffffff8008f44000) +[    0.222829HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages 
-[    0.330523] hw-breakpoint:​ found 6 breakpoint and 4 watchpoint registers. +[    0.223888HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages 
-[    0.337760DMA: preallocated 256 KiB pool for atomic allocations +[    0.230544HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages 
-[    0.367510zynqmp-pinctrl pinctrl: zynqmp pinctrl initialized +[    0.237205] HugeTLB registered ​64.0 KiB page size, pre-allocated 0 pages 
-[    0.368562reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed +[    ​1.208657] DRBG: Continuing without Jitter RNG 
-[    0.375283ARM CCI_400_r1 PMU driver probed +[    1.284514] raid6: ​neonx8 ​  gen()  ​2356 ​MB/s 
-[    0.385206] HugeTLB registered ​2.00 MiB page size, pre-allocated 0 pages +[    ​1.352561] raid6: ​neonx8 ​  xor()  ​1757 ​MB/s 
-[    ​0.455137] raid6: ​int64x1  ​gen()   363 MB/s +[    ​1.420621] raid6: ​neonx4 ​  gen()  ​2400 ​MB/s 
-[    ​0.523090] raid6: ​int64x1  ​xor()   396 MB/s +[    ​1.488662] raid6: ​neonx4 ​  xor()  ​1717 ​MB/s 
-[    ​0.591184] raid6: ​int64x2  ​gen()   602 MB/s +[    ​1.556727] raid6: ​neonx2 ​  gen()  ​2274 ​MB/s 
-[    ​0.659196] raid6: ​int64x2  ​xor()   536 MB/s +[    ​1.624764] raid6: ​neonx2 ​  xor()  ​1578 ​MB/s 
-[    ​0.727208] raid6: ​int64x4  ​gen()   877 MB/s +[    ​1.692829] raid6: ​neonx1 ​  gen()  ​1948 MB/s 
-[    ​0.795263] raid6: ​int64x4  ​xor()   659 MB/s +[    ​1.760876] raid6: ​neonx1 ​  xor()  ​1339 ​MB/s 
-[    ​0.863307] raid6: ​int64x8  ​gen()  ​1021 MB/s +[    ​1.828924] raid6: ​int64x8  ​gen()  ​1578 ​MB/s 
-[    ​0.931367] raid6: ​int64x8  ​xor()   664 MB/s +[    1.896976] raid6: ​int64x8  ​xor()   846 MB/s 
-[    ​0.999412] raid6: ​neonx1 ​  gen()   644 MB/s +[    1.965032] raid6: ​int64x4  ​gen()  ​1754 MB/s 
-[    1.067476] raid6: ​neonx1 ​  xor()   756 MB/s +[    ​2.033084] raid6: ​int64x4  ​xor()   897 MB/s 
-[    1.135536] raid6: ​neonx2 ​  gen()  ​1039 MB/s +[    ​2.101150] raid6: ​int64x2  ​gen()  ​1535 MB/s 
-[    ​1.203602] raid6: ​neonx2 ​  xor()  ​1073 ​MB/s +[    ​2.169190] raid6: ​int64x2  ​xor()   823 MB/s 
-[    ​1.271669] raid6: ​neonx4 ​  gen()  ​1341 MB/s +[    ​2.237260] raid6: ​int64x1  ​gen()  ​1131 MB/s 
-[    ​1.339706] raid6: ​neonx4 ​  xor()  ​1281 ​MB/s +[    ​2.305308] raid6: ​int64x1  ​xor()   567 MB/s 
-[    ​1.407775] raid6: ​neonx8 ​  gen()  ​1410 MB/s +[    ​2.305344] raid6: using algorithm ​neonx4 ​gen() 2400 MB/s 
-[    ​1.475796] raid6: ​neonx8 ​  xor()  ​1336 ​MB/s +[    ​2.309298] raid6: .... xor() 1717 MB/s, rmw enabled 
-[    ​1.475823] raid6: using algorithm ​neonx8 ​gen() 1410 MB/s +[    ​2.314233] raid6: using neon recovery algorithm 
-[    ​1.479791] raid6: .... xor() 1336 MB/s, rmw enabled +[    ​2.319145] iommu: Default domain type: Translated  
-[    ​1.484722] raid6: using neon recovery algorithm +[    2.323858] SCSI subsystem initialized 
-[    ​1.490628] SCSI subsystem initialized +[    ​2.327513] usbcore: registered new interface driver usbfs 
-[    ​1.493184] usbcore: registered new interface driver usbfs +[    ​2.332854] usbcore: registered new interface driver hub 
-[    ​1.498512] usbcore: registered new interface driver hub +[    ​2.338129] usbcore: registered new device driver usb 
-[    ​1.503784] usbcore: registered new device driver usb +[    ​2.343240mc: Linux media interface: v0.10 
-[    ​1.508827media: Linux media interface: v0.10 +[    ​2.347380videodev: ​Linux video capture interface: v2.00 
-[    ​1.513287] Linux video capture interface: v2.00 +[    ​2.352865EDAC MCVer: 3.0.0 
-[    ​1.517883pps_coreLinuxPPS API ver1 registered +[    ​2.356269zynqmp-ipi-mbox mailbox@ff990400Registered ZynqMP IPI mbox with TX/RX channels. 
-[    ​1.522783pps_coreSoftware ver5.3.Copyright 2005-2007 Rodolfo Giometti ​<giometti@linux.it+[    2.364886] jesd204: created con: id=0, topo=0, link=0, /​fpga-axi@0/​axi-jesd204-tx@84a30000 <-> /​fpga-axi@0/​axi-adrv9009-tx-hpc@84a04000 
-[    1.531875PTP clock support registered +[    2.376610] jesd204: created con: id=1, topo=0, link=0, /​fpga-axi@0/​axi-adxcvr-tx@84a20000 <-> /​fpga-axi@0/​axi-jesd204-tx@84a30000 
-[    1.536000zynqmp-ipi ff9905c0.mailboxProbed ZynqMP IPI Mailbox driver+[    2.388288] jesd204: created con: id=2, topo=0, link=0, /​axi/​spi@ff040000/​hmc7044@2 <-> /​fpga-axi@0/​axi-adxcvr-tx@84a20000 
-[    1.542718FPGA manager framework +[    2.399271] jesd204: created con: id=3, topo=0, link=2, /​fpga-axi@0/​axi-adxcvr-rx-os@84a60000 <-> /​fpga-axi@0/​axi-jesd204-rx@84a70000 
-[    1.546063fpga-region fpga-full: FPGA Region probed +[    2.411213] jesd204: created con: id=4, topo=0, link=2, /​axi/​spi@ff040000/​hmc7044@2 <-> /fpga-axi@0/​axi-adxcvr-rx-os@84a60000 
-[    ​1.551065] Advanced Linux Sound Architecture Driver Initialized. +[    2.422455] jesd204: created con: id=5, topo=0, link=1, /​fpga-axi@0/​axi-adxcvr-rx@84a40000 ​<-> /fpga-axi@0/​axi-jesd204-rx@84a50000 
-[    ​1.557291] Bluetooth: Core ver 2.22 +[    2.434132] jesd204: created con: id=6, topo=0, link=1, /​axi/​spi@ff040000/​hmc7044@2 <-/​fpga-axi@0/​axi-adxcvr-rx@84a40000 
-[    ​1.560596] NET: Registered protocol family 31 +[    ​2.445122] jesd204: created con: id=7, topo=0, link=1, /​axi/​spi@ff040000/​hmc7044-car@3 <-> /​axi/​spi@ff040000/​hmc7044@2 
-[    ​1.564997] Bluetooth: HCI device and connection manager initialized +[    2.455843jesd204: created con: id=8, topo=0, link=2, /​axi/​spi@ff040000/​hmc7044-car@3 <-> /​axi/​spi@ff040000/​hmc7044@2 
-[    ​1.571313] Bluetooth: HCI socket layer initialized +[    ​2.466570] jesd204: created con: id=9, topo=0, link=0, /​axi/​spi@ff040000/​hmc7044-car@3 <-> /​axi/​spi@ff040000/​hmc7044@2 
-[    ​1.576155] Bluetooth: L2CAP socket layer initialized +[    2.477328] jesd204: created con: id=10, topo=0, link=1, /​fpga-axi@0/​axi-jesd204-rx@84a50000 <-> /​axi/​spi@ff040000/​adrv9009-phy-b@1 
-[    ​1.581186] Bluetooth: SCO socket layer initialized +[    2.489065jesd204: created con: id=11, topo=0, link=2, /fpga-axi@0/​axi-jesd204-rx@84a70000 <-> /​axi/​spi@ff040000/​adrv9009-phy-b@1 
-[    ​1.586633] clocksource:​ Switched to clocksource arch_sys_counter +[    2.500830] jesd204created con: id=12, topo=0, link=0, /​fpga-axi@0/​axi-adrv9009-tx-hpc@84a04000 <-> /​axi/​spi@ff040000/​adrv9009-phy-b@1 
-[    ​1.592151] VFS: Disk quotas dquot_6.6.0 +[    2.513070] jesd204: created con: id=13, topo=0, link=1, /​axi/​spi@ff040000/​adrv9009-phy-b@1 <-> /​axi/​spi@ff040000/​adrv9009-phy@0 
-[    ​1.596010] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) +[    ​2.524546] jesd204: created con: id=14, topo=0, link=2, /​axi/​spi@ff040000/​adrv9009-phy-b@<-> /​axi/​spi@ff040000/​adrv9009-phy@0 
-[    ​1.607024] NET: Registered protocol family 2 +[    2.536062jesd204: created con: id=15, topo=0, link=0, /​axi/​spi@ff040000/​adrv9009-phy-b@1 <-> /​axi/​spi@ff040000/​adrv9009-phy@0 
-[    ​1.607416] TCP established hash table entries: 32768 (order: 6, 262144 bytes) +[    ​2.547543] jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0:​ JESD204[0:​0] transition uninitialized -> initialized 
-[    ​1.614527] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) +[    2.557215] jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0:​ JESD204[0:1] transition uninitialized -> initialized 
-[    ​1.621359] TCP: Hash tables configured (established 32768 bind 32768) +[    2.566903jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0: JESD204[0:​2] transition uninitialized ​-> initialized 
-[    ​1.627426] UDP hash table entries: 2048 (order: 4, 65536 bytes) +[    2.576587] jesd204found 11 devices and 1 topologies 
-[    ​1.633413] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) +[    2.581715] ​FPGA manager framework 
-[    ​1.639895] NET: Registered protocol family 1 +[    ​2.585176] Advanced Linux Sound Architecture Driver Initialized. 
-[    ​1.644249] RPC: Registered named UNIX socket transport module. +[    ​2.591475] Bluetooth: Core ver 2.22 
-[    ​1.649945] RPC: Registered udp transport module. +[    ​2.594675] NET: Registered protocol family 31 
-[    ​1.654611] RPC: Registered tcp transport module. +[    ​2.599078] Bluetooth: HCI device and connection manager initialized 
-[    ​1.659281] RPC: Registered tcp NFSv4.1 backchannel transport module. +[    ​2.605395] Bluetooth: HCI socket layer initialized 
-[    ​1.666213] hw perfevents: no interrupt-affinity property for /pmu, guessing. +[    ​2.610237] Bluetooth: L2CAP socket layer initialized 
-[    ​1.672962] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available +[    ​2.615260] Bluetooth: SCO socket layer initialized 
-[    ​1.681095audit: initializing netlink subsys (disabled) +[    ​2.620423] clocksource:​ Switched to clocksource arch_sys_counter 
-[    ​1.685914] audit: type=2000 audit(1.631:​1):​ state=initialized audit_enabled=0 res=1 +[    ​2.626256] VFS: Disk quotas dquot_6.6.0 
-[    1.686317] workingset: timestamp_bits=62 max_order=20 bucket_order=0 +[    ​2.630089] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 
-[    ​1.700657] NFS: Registering the id_resolver key type +[    ​2.640491] NET: Registered protocol family 2 
-[    ​1.704971] Key type id_resolver registered +[    ​2.641518] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) 
-[    ​1.709106] Key type id_legacy registered +[    2.649721] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear
-[    ​1.713090] nfs4filelayout_init:​ NFSv4 File Layout Driver Registering... +[    ​2.657734] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear
-[    ​1.719758] jffs2: version 2.2. (NAND) (SUMMARY) ​ �© 2001-2006 Red Hat, Inc. +[    ​2.665174] TCP: Hash tables configured (established 32768 bind 32768) 
-[    ​1.753319Block layer SCSI generic ​(bsg) driver ​version ​0.4 loaded ​(major 247+[    ​2.671367] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear
-[    ​1.755070io scheduler noop registered +[    ​2.678032] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear
-[    ​1.758968io scheduler deadline ​registered +[    ​2.685189] NET: Registered protocol family 1 
-[    ​1.763211io scheduler cfq registered ​(default+[    ​2.689645] RPC: Registered named UNIX socket transport module. 
-[    ​1.767867] io scheduler mq-deadline registered +[    ​2.695275] RPC: Registered udp transport module. 
-[    ​1.772364] io scheduler kyber registered +[    ​2.699940] RPC: Registered tcp transport module. 
-[    ​1.778180] xilinx-dpdma fd4c0000.dma:​ Xilinx DPDMA engine is probed +[    ​2.704608] RPC: Registered tcp NFSv4.1 backchannel transport module. 
-[    1.811060] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled +[    ​2.711551] PCI: CLS 0 bytes, default 64 
-[    ​1.814439] cacheinfo: Unable to detect cache hierarchy for CPU 0 +[    2.715267] hw perfevents: no interrupt-affinity property for /pmu, guessing. 
-[    ​1.822332] brd: module loaded +[    ​2.722149] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available 
-[    ​1.825796] loop: module loaded +[    ​2.730382Initialise system trusted keyrings 
-[    ​1.826457mtdoops: mtd device (mtddev=name/​number) must be supplied +[    ​2.734184] workingset: timestamp_bits=62 max_order=20 bucket_order=0 
-[    ​1.832536] libphy: Fixed MDIO Bus: probed +[    ​2.741039] NFS: Registering the id_resolver key type 
-[    ​1.835518] tun: Universal TUN/TAP device driver, 1.6 +[    ​2.745535] Key type id_resolver registered 
-[    ​1.839638] CAN device driver interface +[    ​2.749675] Key type id_legacy registered 
-[    ​1.843839] macb ff0b0000.ethernet:​ Not enabling partial store and forward +[    ​2.753666] nfs4filelayout_init:​ NFSv4 File Layout Driver Registering... 
-[    1.875869] macb ff0e0000.ethernet:​ Not enabling partial store and forward +[    ​2.760329] jffs2: version 2.2. (NAND) (SUMMARY) ​ �© 2001-2006 Red Hat, Inc. 
-[    1.903460] usbcore: registered new interface driver asix +[    ​2.767476fuse: init (API version ​7.32) 
-[    ​1.903535] usbcore: registered new interface driver ax88179_178a +[    2.804010] NET: Registered protocol family 38 
-[    ​1.909297] usbcore: registered new interface driver cdc_ether +[    2.804051] xor: measuring software checksum speed 
-[    ​1.915092] usbcore: registered new interface driver net1080 +[    2.811368] ​   8regs           : ​ 2593 MB/sec 
-[    ​1.920710] usbcore: registered new interface driver cdc_subset +[    2.815095] ​   32regs ​         :  3071 MB/sec 
-[    ​1.926592] usbcore: registered new interface driver zaurus +[    2.819983] ​   arm64_neon ​     :  2612 MB/sec 
-[    ​1.932137] usbcore: registered new interface driver cdc_ncm +[    2.820543] xor: using function: 32regs ​(3071 MB/sec
-[    ​1.937967xilinx-axipmon ffa00000.perf-monitorProbed Xilinx APM +[    ​2.825565Key type asymmetric ​registered 
-[    ​1.945448] usbcore: registered new interface driver uas +[    ​2.829626Asymmetric key parser '​x509' ​registered 
-[    ​1.949269] usbcore: registered new interface driver usb-storage +[    ​2.834485Block layer SCSI generic ​(bsg) driver version 0.4 loaded (major 248
-[    ​1.955497i2c /dev entries ​driver +[    ​2.841823] io scheduler mq-deadline registered 
-[    ​1.959608IR NEC protocol handler initialized +[    ​2.846320] io scheduler kyber registered 
-[    ​1.963162IR RC5(x/sz) protocol handler initialized +[    ​2.873248] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 
-[    ​1.968176IR RC6 protocol handler initialized +[    ​2.877054] cacheinfo: Unable to detect cache hierarchy for CPU 0 
-[    ​1.972676IR JVC protocol handler initialized +[    ​2.883828] brd: module loaded 
-[    ​1.977171IR Sony protocol handler initialized +[    ​2.887717] loop: module loaded 
-[    ​1.981756IR SANYO protocol handler initialized +[    ​2.887956Registered mathworks_ip class 
-[    1.986427] IR Sharp protocol handler initialized +[    ​2.891876] libphy: Fixed MDIO Bus: probed 
-[    1.991098] IR MCE Keyboard/mouse protocol handler initialized +[    ​2.895120] tun: Universal TUN/TAP device driver, 1.6 
-[    ​1.996894] IR XMP protocol handler initialized +[    ​2.899287] CAN device driver interface 
-[    2.002058] usbcore: registered new interface driver uvcvideo +[    ​2.903665] usbcore: registered new interface driver asix 
-[    ​2.007103] USB Video Class driver (1.1.1) +[    ​2.908433] usbcore: registered new interface driver ax88179_178a 
-[    ​2.011309] axi_fan_control_driver 80000000.axi-fan-control: ​Re-mapped from 0x80000000 to ffffff800b6d0000 +[    ​2.914465] usbcore: registered new interface driver cdc_ether 
-[    ​2.020776axi_fan_control_driver 80000000.axi-fan-controlMajor version mismatch. Expected 1.00.a, Reported 0.01. +[    ​2.920252] usbcore: registered new interface driver net1080 
-[    ​2.031736] cdns-wdt fd4d0000.watchdog:​ Xilinx Watchdog Timer at ffffff800921e000 with timeout 60s +[    ​2.925874] usbcore: registered new interface driver cdc_subset 
-[    ​2.040410] Bluetooth: HCI UART driver ver 2.3 +[    ​2.931757] usbcore: registered new interface driver zaurus 
-[    ​2.044647] Bluetooth: HCI UART protocol ​H4 registered +[    ​2.937304] usbcore: registered new interface driver cdc_ncm 
-[    ​2.049747] Bluetooth: HCI UART protocol ​BCSP registered +[    ​2.943539ehci_hcd: USB 2.0 '​Enhanced'​ Host Controller (EHCI) Driver 
-[    ​2.055023] Bluetooth: HCI UART protocol ATH3K registered +[    2.949387] ehci-pciEHCI PCI platform driver 
-[    ​2.060385] Bluetooth: HCI UART protocol Three-wire (H5) registered +[    ​2.954123] usbcore: registered new interface driver uas 
-[    ​2.066657] Bluetooth: HCI UART protocol Intel registered +[    ​2.959105] usbcore: registered new interface driver usb-storage 
-[    ​2.071977] Bluetooth: HCI UART protocol QCA registered +[    ​2.965091usbcore: registered new interface ​driver ​usbserial_generic 
-[    ​2.077196] usbcore: registered new interface driver bcm203x +[    ​2.971542usbserial: USB Serial support registered for generic 
-[    ​2.082816] usbcore: registered new interface driver bpa10x +[    ​2.977514usbcore: registered new interface driver ftdi_sio 
-[    ​2.088353] usbcore: registered new interface driver bfusb +[    ​2.983218usbserial: USB Serial support registered for FTDI USB Serial Device 
-[    ​2.093804] usbcore: registered new interface driver btusb +[    ​2.990492usbcore: registered new interface driver upd78f0730 
-[    ​2.099226] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 +[    ​2.996366usbserial: USB Serial support registered for upd78f0730 
-[    2.104890] usbcore: registered new interface driver ath3k +[    ​3.003433i2c /dev entries driver 
-[    ​2.110751cpufreqcpufreq_onlineCPU0Running at unlisted freq: 1066666 KHz +[    ​3.007452] usbcore: registered new interface driver uvcvideo 
-[    ​2.117695cpufreqcpufreq_onlineCPU0Unlisted initial frequency changed ​to: 1199999 KHz +[    ​3.011755] USB Video Class driver (1.1.1) 
-[    ​2.126504] sdhci: Secure Digital Host Controller Interface driver +[    ​3.016188] axi_fan_control_driver 80000000.axi-fan-control: ​clk_get failed with -517 
-[    ​2.132269] sdhci: Copyright(c) Pierre Ossman +[    ​3.024182BluetoothHCI UART driver ver 2.3 
-[    ​2.136593] sdhci-pltfm:​ SDHCI platform and OF driver helper +[    ​3.028020] Bluetooth: HCI UART protocol H4 registered 
-[    ​2.143439] ledtrig-cpu:​ registered to indicate activity on CPUs +[    ​3.033118] Bluetooth: HCI UART protocol ​BCSP registered 
-[    ​2.148321] usbcore: registered new interface driver usbhid +[    ​3.038407] Bluetooth: HCI UART protocol ​LL registered 
-[    ​2.153722] usbhid: USB HID core driver +[    ​3.043498] Bluetooth: HCI UART protocol ATH3K registered 
-[    ​2.206546] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered +[    ​3.048872] Bluetooth: HCI UART protocol Three-wire (H5) registered 
-[    ​2.208080] pktgen: Packet Generator for packet performance testing. Version: 2.75 +[    ​3.055118] Bluetooth: HCI UART protocol Intel registered 
-[    ​2.215060] Netfilter messages via NETLINK v0.30. +[    ​3.060465] Bluetooth: HCI UART protocol QCA registered 
-[    2.219659] ip_tables: (C) 2000-2006 Netfilter Core Team +[    ​3.065665] usbcore: registered new interface driver bcm203x 
-[    2.224955] Initializing XFRM netlink socket +[    ​3.071286] usbcore: registered new interface driver bpa10x 
-[    ​2.229113] NET: Registered protocol family 10 +[    ​3.076822] usbcore: registered new interface driver bfusb 
-[    ​2.233830] Segment Routing with IPv6 +[    ​3.082274] usbcore: registered new interface driver btusb 
-[    ​2.237141] ip6_tables: (C) 2000-2006 Netfilter Core Team +[    ​3.087733] usbcore: registered new interface driver ath3k 
-[    2.242594] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver +[    ​3.093257EDAC MC036 UE DDR ECC error type :UE Row 0 Bank 0 BankGroup Number 0 Block Number 0 on mc#​0csrow#​0channel#​0 (csrow:0 chann) 
-[    ​2.248661] NET: Registered protocol family 17 +[    ​3.108288EDAC MC0Giving out device to module 1 controller synps_ddr_controllerDEV synps_edac (INTERRUPT) 
-[    ​2.252766] NET: Registered protocol family 15 +[    3.118380] EDAC DEVICE0Giving out device ​to module zynqmp-ocm-edac controller zynqmp_ocmDEV ff960000.memory-controller (INTERRUPT) 
-[    ​2.257180] bridge: filtering via arp/​ip/​ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. +[    ​3.130636] sdhci: Secure Digital Host Controller Interface driver 
-[    2.270056] Ebtables v2.0 registered +[    ​3.136490] sdhci: Copyright(c) Pierre Ossman 
-[    2.273682] can: controller area network core (rev 20170425 abi 9) +[    ​3.140811] sdhci-pltfm:​ SDHCI platform and OF driver helper 
-[    ​2.279769] NET: Registered protocol family 29 +[    ​3.146774] ledtrig-cpu:​ registered to indicate activity on CPUs 
-[    ​2.284157] can: raw protocol ​(rev 20170425) +[    ​3.152419] SMCCC: SOC_ID: ARCH_SOC_ID not implemented,​ skipping .... 
-[    ​2.288393] can: broadcast manager protocol ​(rev 20170425 t) +[    3.158839] zynqmp_firmware_probe Platform Management API v1.1 
-[    ​2.294018] can: netlink gateway ​(rev 20170425) ​max_hops=1 +[    3.164601] zynqmp_firmware_probe Trustzone version v1.0 
-[    ​2.299519] Bluetooth: RFCOMM TTY layer initialized +[    3.210464] zynqmp-pinctrl firmware:​zynqmp-firmware:​pinctrl:​ zynqmp pinctrl initialized 
-[    ​2.304315] Bluetooth: RFCOMM socket layer initialized +[    3.261518] zynqmp-aes firmware:​zynqmp-firmware:​zynqmp-aes:​ will run requests pump with realtime priority 
-[    ​2.309420] Bluetooth: RFCOMM ver 1.11 +[    3.276577] alg: No test for xilinx-keccak-384 (zynqmp-keccak-384) 
-[    ​2.313136] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 +[    3.277249] alg: No test for xilinx-zynqmp-rsa (zynqmp-rsa) 
-[    ​2.318409] Bluetooth: BNEP filters: protocol multicast +[    3.282776] usbcore: registered new interface driver usbhid 
-[    ​2.323604] Bluetooth: BNEP socket layer initialized +[    ​3.288183] usbhid: USB HID core driver 
-[    ​2.328530] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 +[    ​3.298771] axi_sysid 85000000.axi-sysid-0:​ AXI System ID core version (1.01.a) found 
-[    ​2.334413] Bluetooth: HIDP socket layer initialized +[    3.301131] axi_sysid 85000000.axi-sysid-0:​ [(null)] on [adrv9009zu11eg] git branch <​hdl_2021_r1>​ git <​6a6c5acc8ec422c068c7787cdeb5b0ee4C 
-[    ​2.339445] 9pnet: Installing 9P2000 support +[    3.317071] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered 
-[    ​2.343595] Key type dns_resolver registered +[    ​3.323424] usbcore: registered new interface driver snd-usb-audio 
-[    ​2.348279] registered taskstats version 1 +[    3.330825] pktgen: Packet Generator for packet performance testing. Version: 2.75 
-[    ​2.352220] Btrfs loaded, crc32c=crc32c-generic +[    ​3.337115] Initializing XFRM netlink socket 
-�ہ   2.370929console [ttyPS0] enabledat ​MMIO 0xff010000 (irq = 22, base_baud = 6249999) is a xuartps +[    ​3.340999] NET: Registered protocol family 10 
-[    ​2.370929] console [ttyPS0] enabled +[    ​3.345682] Segment Routing with IPv6 
-[    ​2.374506] bootconsole [cdns0] disabled +[    ​3.349090] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver 
-[    ​2.374506] bootconsole [cdns0] disabled +[    ​3.355144] NET: Registered protocol family 17 
-[    ​2.382895GPIO line 13 (ulpi-phy-reset) hogged as output/​high +[    ​3.359259] NET: Registered protocol family 15 
-[    ​2.392770] xilinx-psgtr fd400000.zynqmp_phyLane:3 type:8 protocol:4 pll_locked:​yes +[    ​3.363753] can: controller area network core 
-[    ​2.400962PLL: shutdown +[    ​3.368008] NET: Registered protocol family 29 
-[    2.404926] zynqmp_pll_set_rate() set divider failed for dpll_int, ret = -13 +[    ​3.372404] can: raw protocol 
-[    2.412016] zynqmp_clk_divider_set_rate() set divider failed for gpu_ref_div1,​ ret = -13 +[    ​3.375339] can: broadcast manager protocol 
-[    ​2.421593] xilinx-dp-snd-codec fd4a0000.zynqmp-display:​zynqmp_dp_snd_codec0:​ Failed to get required clock freq +[    ​3.379496] can: netlink gateway ​max_hops=1 
-[    ​2.431694] xilinx-dp-snd-codec:​ probe of fd4a0000.zynqmp-display:​zynqmp_dp_snd_codec0 failed with error -22 +[    ​3.383882] Bluetooth: RFCOMM TTY layer initialized 
-[    ​2.441756] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm0:​ Xilinx DisplayPort Sound PCM probed +[    ​3.388667] Bluetooth: RFCOMM socket layer initialized 
-[    ​2.449813] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm1:​ Xilinx DisplayPort Sound PCM probed +[    ​3.393776] Bluetooth: RFCOMM ver 1.11 
-[    ​2.457888] xilinx-dp-snd-card fd4a0000.zynqmp-display:​zynqmp_dp_snd_card:​ ASoC: CPU DAI (null) not registered +[    ​3.397485] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 
-[    2.467957] OF: graph: no port node found in /amba/zynqmp-display@fd4a0000 +[    ​3.402758] Bluetooth: BNEP filters: protocol multicast 
-[    ​2.474991[drm] Supports vblank timestamp caching Rev 2 (21.10.2013). +[    ​3.407950] Bluetooth: BNEP socket layer initialized 
-[    ​2.481600] [drm] No driver support for vblank timestamp query. +[    ​3.412878] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 
-[    ​2.487557xlnx-drm xlnx-drm.0: bound fd4a0000.zynqmp-display ​(ops 0xffffff8008b11f30) +[    ​3.418763] Bluetooth: HIDP socket layer initialized 
-[    ​2.519821PLLenable +[    ​3.423797] 9pnet: Installing 9P2000 support 
-[    ​2.649238Consoleswitching to colour frame buffer device 240x67 +[    ​3.427940] NET: Registered protocol family 36 
-[    ​2.674637zynqmp-display fd4a0000.zynqmp-displayfb0 frame buffer device +[    3.432354] Key type dns_resolver registered 
-[    ​2.681970] [drmInitialized xlnx 1.0.0 20130509 for fd4a0000.zynqmp-display on minor +[    ​3.436762] registered taskstats version 1 
-[    ​2.690077zynqmp-display fd4a0000.zynqmp-displayZynqMP DisplayPort Subsystem driver probed +[    ​3.440652] Loading compiled-in X.509 certificates 
-[    ​2.699142macb ff0b0000.ethernetNot enabling partial store and forward +[    3.445743] Btrfs loaded, crc32c=crc32c-generic 
-[    ​2.706553libphyMACB_mii_bus:​ probed +[    3.457843ff010000.serial: ​ttyPS0 ​at MMIO 0xff010000 (irq = 31, base_baud = 6249999) is a xuartps 
-[    ​2.740068] macb ff0e0000.ethernet:​ Not enabling partial store and forward +[    ​3.466866printk: ​console [ttyPS0] enabled 
-[    ​2.747391] libphy: MACB_mii_bus:​ probed +[    ​3.466866printk: console [ttyPS0] enabled 
-[    ​2.822746] macb ff0e0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0e0000 irq 14 (1e:d5:da:08:37:fe+[    3.471160] printk: ​bootconsole [cdns0] disabled 
-[    ​2.832574Marvell 88E1510 ff0e0000.ethernet-ffffffff:00: attached PHY driver ​[Marvell 88E1510(mii_bus:phy_addr=ff0e0000.ethernet-ffffffff:00, irq=POLL) +[    ​3.471160printk: ​bootconsole [cdns0] disabled 
-[    ​2.848331] xilinx-psgtr fd400000.zynqmp_phyLane:1 type:0 protocol:3 pll_locked:yes +[    ​3.480447of-fpga-region fpga-full: FPGA Region probed 
-[    ​2.858414xhci-hcd xhci-hcd.0.autoxHCI Host Controller +[    3.490483] gpio-13 (ulpi-phy-reset)hogged as output/​high 
-[    ​2.863909xhci-hcd xhci-hcd.0.autonew USB bus registeredassigned ​bus number ​+[    ​3.497715] xilinx-zynqmp-dpdma fd4c0000.dma-controllerXilinx DPDMA engine is probed 
-[    ​2.871802xhci-hcd xhci-hcd.0.autohcc params 0x0238f625 hci version 0x100 quirks 0x22010010 +[    ​3.506449zynqmp-display fd4a0000.display: vtc bridge property not present 
-[    ​2.880522xhci-hcd xhci-hcd.0.autoirq 34, io mem 0xfe200000 +[    ​3.515394] xilinx-dp-snd-codec fd4a0000.display:​zynqmp_dp_snd_codec0:​ Failed to get required clock freq 
-[    ​2.886556usb usb1New USB device foundidVendor=1d6b,​ idProduct=0002 +[    ​3.524898] xilinx-dp-snd-codec:​ probe of fd4a0000.display:​zynqmp_dp_snd_codec0 failed with error -22 
-[    ​2.893344usb usb1New USB device stringsMfr=3Product=2SerialNumber=1 +[    ​3.535124] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm0:​ Xilinx DisplayPort Sound PCM probed 
-[    ​2.900561usb usb1ProductxHCI Host Controller +[    ​3.543954] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm1:​ Xilinx DisplayPort Sound PCM probed 
-[    ​2.905430usb usb1ManufacturerLinux 4.14.0-12222-g6598c88 xhci-hcd +[    ​3.552860] OF: graph: no port node found in /axi/​display@fd4a0000 
-[    ​2.912122usb usb1SerialNumberxhci-hcd.0.auto +[    ​3.559244xlnx-drm xlnx-drm.0: bound fd4a0000.display (ops 0xffffffc010ffd810
-[    ​2.917295hub 1-0:1.0USB hub found +[    ​4.644438zynqmp-display fd4a0000.display: ​[drm] Cannot find any crtc or sizes 
-[    ​2.921056hub 1-0:1.01 port detected +[    ​4.652071[drm] Initialized ​xlnx 1.0.0 20130509 for fd4a0000.display on minor 0 
-[    ​2.925157xhci-hcd xhci-hcd.0.autoxHCI Host Controller +[    4.659562] ​zynqmp-display ​fd4a0000.display:​ ZynqMP DisplayPort Subsystem driver probed 
-[    ​2.930646xhci-hcd xhci-hcd.0.autonew USB bus registered, assigned bus number 2 +[    ​4.668777adrv9009 spi1.0adrv9009_probe : enter 
-[    ​2.938339usb usb2We don't know the algorithms for LPM for this hostdisabling LPM+[    ​4.674594adrv9009 spi1.1adrv9009_probe : enter 
-[    ​2.946513usb usb2New USB device foundidVendor=1d6bidProduct=0003 +[    ​4.760470hmc7044 spi1.3: PLL1: Locked, CLKIN3 @ 38400000 Hz, PFD: 7680 kHz PLL2: Locked @ 2949.120000 MHz 
-[    ​2.953294usb usb2New USB device strings: Mfr=3Product=2SerialNumber=1 +[    4.770830] jesd204: /​axi/​spi@ff040000/​hmc7044-car@3,​jesd204:3,​parent=spi1.3Using as SYSREF provider 
-[    ​2.960504usb usb2ProductxHCI Host Controller +[    ​4.780817hmc7044 spi1.4: Read/Write check failed (0xFF) 
-[    ​2.965375usb usb2ManufacturerLinux 4.14.0-12222-g6598c88 xhci-hcd +   ​4.833539hmc7044 spi1.4: Probed, SPI read support failed 
-[    ​2.972066usb usb2: SerialNumber:​ xhci-hcd.0.auto +[    4.840132] spi-nor spi0.0: SPI-NOR-UniqueID 104000a87704000209002100f73e717c69 
-[    ​2.977185hub 2-0:1.0: USB hub found +[    4.847824] random: fast init done 
-[    ​2.980948hub 2-0:1.0: 1 port detected +[    4.851386] spi-nor spi0.0: trying to lock already unlocked area 
-[    ​2.987163at24 0-002c2048 byte 24c16 EEPROMwritable, 1 bytes/write +[    4.857388] spi-nor spi0.0: n25q512a (131072 Kbytes) 
-[    ​2.993894cdns-i2c ff020000.i2c400 kHz mmio ff020000 irq 16 +[    ​4.8623624 fixed-partitions partitions found on MTD device spi0.
-[    ​3.258646usb 1-1new full-speed USB device number 2 using xhci-hcd +[    4.868706] Creating 4 MTD partitions on "​spi0.0":​ 
-[    ​3.412784usb 1-1New USB device foundidVendor=046d, idProduct=c52b +[    4.873488] 0x000000000000-0x000002000000 ​"​qspi-fsbl-uboot"​ 
-[    ​3.419485usb 1-1New USB device stringsMfr=1Product=2, SerialNumber=0 +[    ​4.8799310x000002000000-0x000002020000 : "​qspi-uboot-env"​ 
-[    ​3.426618usb 1-1ProductUSB Receiver +[    4.886199] 0x000002020000-0x000002100000 ​"​qspi-nvmfs"​ 
-[    ​3.430704usb 1-1ManufacturerLogitech +[    ​4.8921150x000002100000-0x000007f00000 ​"​qspi-linux"​ 
-[    ​3.444263inputLogitech USB Receiver as /devices/platform/amba/​ff9d0000.usb0/​fe200000.dwc3/​xhci-hcd.0.auto/usb1/1-1/1-1:1.0/0003:046D:C52B.0001/​input/​input0 +[    ​4.899871] macb ff0e0000.ethernet:​ Not enabling partial store and forward 
-[    ​3.515005hid-generic 0003:046D:C52B.0001input: USB HID v1.11 Keyboard ​[Logitech USB Receiveron usb-xhci-hcd.0.auto-1/input0 +[    ​4.907400] libphy: MACB_mii_bus:​ probed 
-[    ​3.530419inputLogitech USB Receiver as /devices/platform/amba/​ff9d0000.usb0/​fe200000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1:1.1/0003:046D:C52B.0002/input/input1 +[    ​4.913221] macb ff0e0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0e0000 irq 21 (00:e0:22:fe:0b:d6
-[    ​3.602770hid-generic 0003:046D:C52B.0002inputUSB HID v1.11 Mouse [Logitech USB Receiveron usb-xhci-hcd.0.auto-1/input1 +[    ​4.923467xilinx-axipmon ffa00000.perf-monitorProbed Xilinx APM 
-[    ​3.616926hid-generic 0003:046D:C52B.0003device has no listeners, quitting +   ​4.930029xilinx-axipmon fd0b0000.perf-monitorProbed Xilinx APM 
-[    ​4.018649cdns-i2c ff030000.i2ctimeout waiting on completion +[    4.936559] xilinx-axipmon fd490000.perf-monitorProbed Xilinx APM 
-[    ​4.024653pca954x 1-0070probe failed +[    ​4.943067] xilinx-axipmon ffa10000.perf-monitorProbed Xilinx APM 
-[    ​4.028626cdns-i2c ff030000.i2c400 kHz mmio ff030000 irq 17 +[    4.951512] OFgraphno port node found in /​axi/​phy@fd400000 
-[    ​4.078646mmc0SDHCI controller on ff170000.mmc [ff170000.mmcusing ADMA 64-bit +[    5.053782] at24 0-002csupply vcc not found, using dummy regulator 
-[    ​4.092758] adrv9009 spi1.0: ​adrv9009_probe ​enter +[    5.060764] at24 0-002c2048 byte 24c16 EEPROM, writable, 1 bytes/write 
-[    ​4.097840] adrv9009 spi1.1adrv9009_probe ​enter +[    ​5.067510cdns-i2c ff020000.i2c:​ 400 kHz mmio ff020000 irq 23 
-[    ​4.157557axi_adxcvr 84a40000.axi-adxcvr-rx: AXI-ADXCVR-RX (17.01.a) using GTH4 at 0x84A40000 mapped to 0xffffff8009375000. Number of lanes4. +[    5.075102] i2c i2c-1: Added multiplexed i2c bus 3 
-[    ​4.172340axi_adxcvr 84a60000.axi-adxcvr-rx-osAXI-ADXCVR-RX (17.01.a) using GTH4 at 0x84A60000 mapped to 0xffffff800937d000. Number of lanes4. +[    5.569318] i2c i2c-1: Added multiplexed i2c bus 4 
-[    ​4.186326axi_adxcvr 84a20000.axi-adxcvr-tx: AXI-ADXCVR-TX (17.01.a) using GTH4 at 0x84A20000 mapped to 0xffffff8009385000. Number of lanes8. +[    5.574255] i2c i2c-1Added multiplexed i2c bus 5 
-[    ​4.201026xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card:​ ASoC: CPU DAI (null) not registered +[    ​5.579276at24 6-0050: supply vcc not found, using dummy regulator 
-[    ​4.211374macb ff0b0000.ethernetNot enabling partial store and forward +[    5.615141] i2c i2c-1: Added multiplexed i2c bus 6 
-[    ​4.218802libphyMACB_mii_busprobed +[    5.620155] at24 7-0050: supply vcc not found, using dummy regulator 
-[    ​4.235694mmc0new high speed SDHC card at address aaaa +[    5.654316] i2c i2c-1Added multiplexed i2c bus 
-[    ​4.241355mmcblk0mmc0:aaaa SU08G 7.40 GiB  +[    5.659324] at24 8-0050: supply vcc not foundusing dummy regulator 
-[    ​4.246924 ​mmcblk0p1 p2 p3 +[    5.695115] i2c i2c-1: Added multiplexed i2c bus 
-[    ​4.294737macb ff0b0000.ethernet eth1Cadence GEM rev 0x50070106 at 0xff0b0000 irq 13 (da:3c:6d:34:48:50) +[    5.700043] i2c i2c-1: Added multiplexed i2c bus 9 
-[    ​4.304563Marvell 88E1510 ff0e0000.ethernet-ffffffff:01attached PHY driver ​[Marvell 88E1510] (mii_bus:phy_addr=ff0e0000.ethernet-ffffffff:01irq=POLL) +[    ​5.704968i2c i2c-1: Added multiplexed i2c bus 10 
-   4.318901] adrv9009 spi1.0: ​adrv9009_probe ​enter +[    5.709847] pca954x 1-0070: registered 8 multiplexed busses for I2C switch pca9548 
-   4.326803] adrv9009 spi1.0: ​ADIHAL_resetHw at index +[    5.717454] cdns-i2c ff030000.i2c400 kHz mmio ff030000 irq 24 
-   4.799975randomcrng init done +[    ​5.724248cdns-wdt fd4d0000.watchdog: Xilinx Watchdog Timer with timeout 60s 
-[   11.866079] adrv9009 spi1.0: ​TAL_DEFRAMER_A deframerStatus 0x12 +[    5.731852] cpu cpu0dev_pm_opp_set_rate:​ failed to find current OPP for freq 1316666653 (-34) 
-[   11.872090] adrv9009 spi1.0: ​TAL_FRAMER_A framerStatus 0x21 +[    ​5.740593cpufreqcpufreq_online:​ CPU0: Running at unlisted initial frequency: 1316666 KHzchanging to: 1199999 KHz 
-[   11.877752] adrv9009 spi1.0: ​TAL_FRAMER_B framerStatus 0x29 +[    ​5.751385cpu cpu0dev_pm_opp_set_ratefailed to find current OPP for freq 1316666653 (-34) 
-[   11.987596] adrv9009 spi1.0: ​adrv9009_probe: adrv9009-x2 Rev 192Firmware 6.0.2 API version3.6.0.5 successfully initialized +[    5.761590] zynqmp-display fd4a0000.display:​ [drm] Cannot find any crtc or sizes 
-[   11.999161] adrv9009 spi1.1adrv9009_probe ​enter +[    5.771554] axi-i2s 82000000.axi-i2s-adi:​ probedcapture enabledplayback enabled 
-[   12.006907] adrv9009 spi1.1ADIHAL_resetHw at index +[    ​5.779704adrv9009 spi1.0adrv9009_probe ​enter 
-[   12.690647] axi-jesd204-rx 84a50000.axi-jesd204-rxLane 2 desynced (8 errors)restarting link +[    ​5.785338adrv9009 spi1.1adrv9009_probe ​enter 
-[   12.699342] axi-jesd204-rx 84a50000.axi-jesd204-rxLane 3 desynced (12 errors)restarting link +[    5.794144] mmc0: SDHCI controller on ff170000.mmc [ff170000.mmc] using ADMA 64-bit 
-[   12.808150] axi-jesd204-rx 84a70000.axi-jesd204-rxLane 2 desynced (9 errors)restarting link +[    ​5.838432hmc7044 spi1.2PLL1Locked, CLKIN1 @ 30720000 Hz, PFD: 30720 kHz PLL2: Locked @ 2949.120000 MHz 
-[   12.816842] axi-jesd204-rx 84a70000.axi-jesd204-rxLane 3 desynced (631 errors)restarting link +[    5.849324] macb ff0b0000.ethernet:​ Not enabling partial store and forward 
-[   19.576472] adrv9009 spi1.1: ​adrv9009_probe: adrv9009 Rev 192, Firmware 6.0.2 API version: 3.6.0.successfully initialized +[    ​5.859757mmc0new high speed SDHC card at address 0001 
-[   19.599339cf_axi_dds 84a04000.axi-adrv9009-tx-hpcAnalog Devices CF_AXI_DDS_DDS MASTER (9.01.b) at 0x84A04000 mapped to 0xffffff800cb60000,​ probed DDS ADRV9009-X2 +[    5.865588] mmcblk0mmc0:0001 SD16G 14.6 GiB  
-[   19.614346xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_cardASoC: CPU DAI (null) not registered +[    ​5.871588libphy: MACB_mii_bus:​ probed 
-[   19.644911cf_axi_adc 84a00000.axi-adrv9009-rx-hpcADI AIM (10.01.b) at 0x84A00000 mapped to 0xffffff800cb70000probed ADC ADRV9009-X2 as MASTER +[    5.875571] macb ff0b0000.ethernet eth1: Cadence GEM rev 0x50070106 at 0xff0b0000 irq 20 (c6:​bd:​2a:​d9:​e2:​01) 
-[   19.658310xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card:​ ASoCCPU DAI (null) not registered +[    5.887653] ​ mmcblk0: p1 p2 p3 
-[   19.669477] input: gpio_keys as /​devices/​platform/​gpio_keys/​input/​input2 +[    5.891736] axi_adxcvr 84a40000.axi-adxcvr-rxAXI-ADXCVR-RX (17.05.a) using CPLL on GTH4 at 0x84A40000. Number of lanes4. 
-[   19.676324hctosysunable to open rtc device (rtc0) +[    ​5.905263axi_adxcvr 84a60000.axi-adxcvr-rx-os: AXI-ADXCVR-RX (17.05.a) using CPLL on GTH4 at 0x84A60000. Number of lanes4. 
-[   19.682504] ALSA device list: +[    ​5.917738axi_adxcvr 84a20000.axi-adxcvr-tx: AXI-ADXCVR-TX (17.05.a) using QPLL on GTH4 at 0x84A20000. Number of lanes8. 
-[   19.685470]   No soundcards found. +[    ​5.929482axi-jesd204-rx 84a50000.axi-jesd204-rxAXI-JESD204-RX (1.07.a) at 0x84A50000. Encoder 8b10bwidth 4/4, lanes 4, jesd204-fs
-[   19.689366xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card:​ ASoC: CPU DAI (nullnot registered +[    ​5.942407axi-jesd204-rx 84a70000.axi-jesd204-rxAXI-JESD204-RX (1.07.a) at 0x84A70000. Encoder 8b10bwidth 4/4lanes 4, jesd204-fs. 
-[   19.723364] EXT4-fs (mmcblk0p2):​ mounted filesystem with ordered data mode. Opts: (null) +[    ​5.955219axi-jesd204-tx 84a30000.axi-jesd204-txAXI-JESD204-TX (1.06.a) at 0x84A30000. Encoder 8b10bwidth 4/4lanes 8, jesd204-fs. 
-[   19.731468] VFS: Mounted root (ext4 filesystem) on device 179:2. +[    ​5.972920adrv9009 spi1.0adrv9009_probe ​enter 
-[   19.745864] devtmpfs: mounted +[    ​5.983087adrv9009 spi1.1adrv9009_probe ​enter 
-[   19.748945] Freeing unused kernel memory: ​512K +[    6.014044] cf_axi_adc 84a00000.axi-adrv9009-rx-hpc: ADI AIM (10.01.b) at 0x84A00000 mapped to 0x(____ptrval____),​ probed ADC ADRV9009-XR 
-Mount failed for selinuxfs on /sys/fs/selinux No such file or directory +[    ​6.045146cf_axi_dds 84a04000.axi-adrv9009-tx-hpc:​ Analog Devices CF_AXI_DDS_DDS MASTER (9.01.b) at 0x84A04000 mapped to 0x(____ptrval2 
-[   19.954655axi-jesd204-rx 84a50000.axi-jesd204-rxLane desynced ​(50 errors), restarting link +[    ​6.059953jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,jesd204:0,​parent=spi1.0: JESD204[0:​0] transition initialized -> probed 
-[   19.963439axi-jesd204-rx 84a50000.axi-jesd204-rxLane 3 desynced (10 errors)restarting link +[    ​6.071171jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,jesd204:0,​parent=spi1.0: JESD204[0:1] transition initialized -> probed 
-[   20.080717inithwclock main process ​(1789terminated with status ​+[    ​6.082381jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,parent=spi1.0:​ JESD204[0:​2] transition initialized -> probed 
-[   20.082654axi-jesd204-rx 84a70000.axi-jesd204-rxLane 2 desynced ​(9 errors), restarting link +[    ​6.093608jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0JESD204[0:​0] transition probed -> idle 
-[   20.082660axi-jesd204-rx 84a70000.axi-jesd204-rxLane 3 desynced ​(9 errors), restarting link +[    ​6.104214jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,​parent=spi1.0:​ JESD204[0:​1] transition probed ​-> idle 
-[ OK ]ting up X socket directories...         +[    ​6.114829jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,parent=spi1.0: JESD204[0:​2] transition probed -> idle 
- * STARTDISTCC ​is set to false in /etc/default/​distcc +[    ​6.125442jesd204/​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,parent=spi1.0: JESD204[0:​0] transition idle -> device_init 
- /usr/bin/distccd not starting +[    ​6.136484jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,​parent=spi1.0JESD204[0:​1] transition idle -> device_init 
-[ OK ]rting IIO Daemon ​iiod        ​+[    ​6.147523jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,​parent=spi1.0JESD204[0:​2] transition idle -> device_init 
 +[    ​6.158566jesd204: /axi/spi@ff040000/adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: JESD204[0:​0] transition device_init -> link_init 
 +[    6.170044] jesd204: ​/axi/spi@ff040000/adrv9009-phy@0,​jesd204:0,​parent=spi1.0: JESD204[0:1] transition device_init -> link_init 
 +[    ​6.181515jesd204/​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,​parent=spi1.0JESD204[0:2transition device_init ​-> link_init 
 +[    6.193005] jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: JESD204[0:​0] transition link_init ​-> link_supported 
 +[    ​6.204735jesd204: /axi/spi@ff040000/adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: JESD204[0:​1] transition link_init -> link_supported 
 +[    6.216469] jesd204: ​/axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: JESD204[0:​2] transition link_init -> link_supported 
 +[    6.228926] jesd204: ​/axi/spi@ff040000/adrv9009-phy@0,​jesd204:0,​parent=spi1.0JESD204[0:0] transition link_supported -> link_pre_setup 
 +[    6.241098] jesd204: ​/axi/spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0:​ JESD204[0:​1] transition link_supported -> link_pre_setup 
 +[    ​6.253263jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,​parent=spi1.0JESD204[0:​2] transition link_supported -> link_pre_setup 
 +[    6.309896] jesd204/​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,​parent=spi1.0: JESD204[0:0transition link_pre_setup ​-> clk_sync_stage1 
 +[    6.322153] jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: JESD204[0:1] transition link_pre_setup -> clk_sync_stage1 
 +[    ​6.334408jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,​parent=spi1.0JESD204[0:​2] transition link_pre_setup -> clk_sync_stage1 
 +[    ​6.356435jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0JESD204[0:​0] transition clk_sync_stage1 -> clk_sync_stage2 
 +[    ​6.368780jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,​parent=spi1.0:​ JESD204[0:​1] transition clk_sync_stage1 -> clk_sync_stage2 
 +[    ​6.381121jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0JESD204[0:​2] transition clk_sync_stage1 -> clk_sync_stage2 
 +[    ​6.393546jesd204/​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: JESD204[0:0transition clk_sync_stage2 ​-> clk_sync_stage3 
 +[    ​6.405887jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: ​JESD204[0:1] transition clk_sync_stage2 -> clk_sync_stage3 
 +[    ​6.418228jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0JESD204[0:2] transition clk_sync_stage2 -> clk_sync_stage3 
 +[    ​6.430573jesd204: /​fpga-axi@0/​axi-jesd204-rx@84a50000,​jesd204:5,​parent=84a50000.axi-jesd204-rxPossible instantiation for multiple c2 
 +[    ​6.445780jesd204: /​fpga-axi@0/​axi-jesd204-rx@84a70000,​jesd204:7,​parent=84a70000.axi-jesd204-rxPossible instantiation for multiple c2 
 +[    ​6.460988jesd204: /​fpga-axi@0/​axi-jesd204-tx@84a30000,​jesd204:9,​parent=84a30000.axi-jesd204-txPossible instantiation for multiple c4 
 +[    ​6.478205adrv9009 spi1.1ADIHAL_resetHw 
 +[    ​6.807922adrv9009 spi1.0ADIHAL_resetHw 
 +[    ​7.137699jesd204/​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,​parent=spi1.0:​ JESD204[0:​0] transition clk_sync_stage3 -> link_setup 
 +[    ​7.149606jesd204/​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0:​ JESD204[0:​1] transition clk_sync_stage3 -> link_setup 
 +[    ​7.161513jesd204/​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,​parent=spi1.0: JESD204[0:​2] transition clk_sync_stage3 -> link_setup 
 +[    ​7.173585jesd204/​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0:​ JESD204[0:​0] transition link_setup -> opt_setup_stage1 
 +[    ​7.185576jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0JESD204[0:1] transition link_setup -> opt_setup_stage1 
 +[    7.197571] jesd204/​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,​parent=spi1.0JESD204[0:2] transition link_setup -> opt_setup_stage1 
 +[    ​7.302940random: crng init done 
 +[   11.155203] jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,​parent=spi1.0JESD204[0:0] transition opt_setup_stage1 -> opt_setup_sta2 
 +[   11.167722] jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,parent=spi1.0: JESD204[0:​1] transition opt_setup_stage1 -> opt_setup_sta2 
 +  11.180234jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: ​JESD204[0:2] transition opt_setup_stage1 -> opt_setup_sta2 
 +  11.192954jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: ​JESD204[0:​0] transition opt_setup_stage2 -> opt_setup_sta3 
 +  11.205468jesd204/​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0:​ JESD204[0:​1] transition opt_setup_stage2 -> opt_setup_sta3 
 +[   11.217981jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: ​JESD204[0:​2] transition opt_setup_stage2 -> opt_setup_sta3 
 +[   11.230697jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: ​JESD204[0:​0] transition opt_setup_stage3 -> opt_setup_sta4 
 +[   11.243215jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: ​JESD204[0:​1] transition opt_setup_stage3 -> opt_setup_sta4 
 +[   11.255731jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: ​JESD204[0:2] transition opt_setup_stage3 -> opt_setup_sta4 
 +[   ​16.470043] jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,jesd204:0,​parent=spi1.0JESD204[0:​0] transition opt_setup_stage4 -> opt_setup_sta5 
 +[   16.482562] jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0: JESD204[0:​1] transition opt_setup_stage4 -> opt_setup_sta5 
 +[   16.495075jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0JESD204[0:2] transition opt_setup_stage4 -> opt_setup_sta5 
 +[   16.508137jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0JESD204[0:​0] transition opt_setup_stage5 -> clocks_enable 
 +[   16.520399jesd204: /axi/​spi@ff040000/​adrv9009-phy@0,jesd204:​0,​parent=spi1.0:​ JESD204[0:​1] transition opt_setup_stage5 ​-> clocks_enable 
 +[   16.532650] jesd204: /axi/​spi@ff040000/​adrv9009-phy@0,jesd204:0,parent=spi1.0:​ JESD204[0:​2] transition opt_setup_stage5 -> clocks_enable 
 +[   16.550135jesd204: /axi/​spi@ff040000/​adrv9009-phy@0,jesd204:​0,​parent=spi1.0:​ JESD204[0:​0] transition clocks_enable ​-> link_enable 
 +[   16.561954] jesd204: /axi/​spi@ff040000/​adrv9009-phy@0,jesd204:0,parent=spi1.0:​ JESD204[0:​1] transition clocks_enable -> link_enable 
 +[   16.573775jesd204: /axi/​spi@ff040000/​adrv9009-phy@0,jesd204:​0,​parent=spi1.0:​ JESD204[0:​2] transition clocks_enable ​-> link_enable 
 +[   16.620711] jesd204: /axi/​spi@ff040000/​adrv9009-phy@0,jesd204:0,parent=spi1.0:​ JESD204[0:​0] transition link_enable -> link_running 
 +[   16.632446jesd204: /axi/​spi@ff040000/​adrv9009-phy@0,jesd204:​0,​parent=spi1.0:​ JESD204[0:​1] transition link_enable ​-> link_running 
 +[   16.644179] jesd204: /axi/​spi@ff040000/​adrv9009-phy@0,jesd204:0,parent=spi1.0:​ JESD204[0:​2] transition link_enable -> link_running 
 +[   16.757453] adrv9009 spi1.1: ​adrv9009_info: adrv9009 Rev 192, Firmware 6.2.1 API version: 3.6.2.successfully initialized ​via jesd204-fm 
 +[   16.871422adrv9009 spi1.0: adrv9009_info: ​adrv9009-x2 Rev 192, Firmware 6.2.1 API version3.6.2.1 successfully initialized via jesd20m 
 +[   16.884116jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0JESD204[0:0] transition link_running -> opt_post_running_e 
 +[   16.896803jesd204: /axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:0,parent=spi1.0:​ JESD204[0:​1] transition link_running ​-> opt_post_running_e 
 +[   16.909492jesd204: /​axi/​spi@ff040000/​adrv9009-phy@0,​jesd204:​0,​parent=spi1.0JESD204[0:2] transition link_running -> opt_post_running_e 
 +[   16.925576] input: gpio_keys as /​devices/​platform/​gpio_keys/​input/​input0 
 +[   16.932512] of_cfs_init 
 +[   16.934968of_cfs_initOK 
 +[   16.937966] cfg80211: Loading compiled-in X.509 certificates for regulatory database 
 +[   ​17.061586] cfg80211: Loaded X.509 cert '​sforshee:​ 00b28ddf47aef9cea7'​ 
 +[   ​17.068114] clk: Not disabling unused clocks 
 +[   ​17.072633] ALSA device list: 
 +[   17.075591]   #0: ADRV9009 ZU11EG ADAU1761 
 +[   17.079945platform regulatory.0: Direct firmware load for regulatory.db failed with error -
 +[   ​17.088553] cfg80211failed to load regulatory.db 
 +[   ​17.944935] EXT4-fs ​(mmcblk0p2): recovery complete 
 +[   17.953394] EXT4-fs (mmcblk0p2):​ mounted filesystem with ordered data mode. Opts: (null) 
 +[   17.961514] VFS: Mounted root (ext4 filesystem) on device 179:2. 
 +[   17.975849] devtmpfs: mounted 
 +[   17.979570] Freeing unused kernel memory: ​2496K 
 +[   ​17.984188] Run /sbin/init as init process 
 +[   ​18.494456] systemd[1]System time before build time, advancing clock. 
 +[   18.533602systemd[1]: systemd 247.3-7+rpi1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRY) 
 +[   ​18.556807] systemd[1]Detected architecture arm64. 
 + 
 +Welcome to Kuiper GNU/Linux 11.2 (bullseye)
 + 
 +[   ​18.581954] systemd[1]: Set hostname to <​analog>​. 
 +[   19.969929systemd[1]: /​lib/​systemd/​system/​plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disab. 
 +[   ​20.190835] systemd[1]: Queued start job for default target Graphical Interface. 
 +[   ​20.199479] systemd[1]: system-getty.sliceunit configures an IP firewallbut the local system does not support BPF/cgroup firewalling. 
 +[   20.211857] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) 
 +[   ​20.220887] systemd[1]: Created slice system-getty.slice. 
 +[  OK  ] Created slice system-getty.slice. 
 +[   20.240857systemd[1]: Created slice system-modprobe.slice. 
 +[  OK  ] Created slice system-modprobe.slice. 
 +[   ​20.260796] systemd[1]: Created slice system-serial\x2dgetty.slice. 
 +[  OK  ] Created slice system-serial\x2dgetty.slice. 
 +[   ​20.284787] systemd[1]Created slice system-systemd\x2dfsck.slice. 
 +[  OK  ] Created slice system-systemd\x2dfsck.slice. 
 +[   ​20.308673] systemd[1]: Created slice User and Session Slice. 
 +[  OK  ] Created slice User and Session Slice. 
 +[   ​20.328694] systemd[1]: Started Forward Password Requests to Wall Directory Watch. 
 +[  OK  ] Started Forward Password R�…uests to Wall Directory Watch. 
 +[   ​20.352710] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. 
 +[   ​20.365061] systemd[1]: Reached target Slices. 
 +[  OK  ] Reached target Slices. 
 +[   ​20.380579] systemd[1]: Reached target Swap. 
 +[  OK  ] Reached target Swap. 
 +[   ​20.397194] systemd[1]: Listening on Syslog Socket. 
 +[  OK  ] Listening on Syslog Socket. 
 +[   ​20.412791] systemd[1]: Listening on fsck to fsckd communication Socket. 
 +[  OK  ] Listening on fsck to fsckd communication Socket. 
 +[   ​20.436648] systemd[1]: Listening on initctl Compatibility Named Pipe. 
 +[  OK  ] Listening on initctl Compatibility Named Pipe. 
 +[   ​20.461108] systemd[1]: Listening on Journal Audit Socket. 
 +[  OK  ] Listening on Journal Audit Socket. 
 +[   ​20.480793] systemd[1]: Listening on Journal Socket ​(/dev/log)
 +[  OK  ] Listening on Journal Socket (/dev/log). 
 +[   20.504852systemd[1]: Listening on Journal Socket. 
 +[  OK  ] Listening on Journal Socket. 
 +[   ​20.522281] systemd[1]: Listening on udev Control Socket. 
 +[  OK  ] Listening on udev Control Socket. 
 +[   ​20.544788] systemd[1]: Listening on udev Kernel Socket. 
 +[  OK  ] Listening on udev Kernel Socket. 
 +[   ​20.566278] systemd[1]: Mounting Huge Pages File System... 
 +         ​Mounting Huge Pages File System... 
 +[   ​20.582131] systemd[1]: Mounting POSIX Message Queue File System... 
 +         ​Mounting POSIX Message Queue File System... 
 +[   ​20.605935] systemd[1]: Mounting RPC Pipe File System... 
 +         ​Mounting RPC Pipe File System... 
 +[   ​20.622162] systemd[1]: Mounting Kernel Debug File System... 
 +         ​Mounting Kernel Debug File System... 
 +[   ​20.636917] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. 
 +[   ​20.645539] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. 
 +[   ​20.658448] systemd[1]: Starting Restore / save the current clock... 
 +         ​Starting Restore / save the current clock... 
 +[   ​20.687824] systemd[1]: Starting Set the console keyboard layout... 
 +         ​Starting Set the console keyboard layout... 
 +[   ​20.710146] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped. 
 +[   ​20.723451] systemd[1]: Starting Load Kernel Module configfs... 
 +         ​Starting Load Kernel Module configfs... 
 +[   ​20.742522] systemd[1]: Starting Load Kernel Module drm... 
 +         ​Starting Load Kernel Module drm... 
 +[   ​20.762848] systemd[1]: Starting Load Kernel Module fuse... 
 +         ​Starting Load Kernel Module fuse... 
 +[   ​20.788151] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. 
 +[   ​20.797422] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. 
 +[   ​20.808264] systemd[1]: Starting Journal Service... 
 +         ​Starting Journal Service... 
 +[   ​20.829135] systemd[1]: Starting Load Kernel Modules... 
 +         ​Starting Load Kernel Modules... 
 +[   ​20.846420] systemd[1]: Starting Remount Root and Kernel File Systems... 
 +         ​Starting Remount Root and Kernel File Systems... 
 +[   ​20.870354] systemd[1]: Starting Coldplug All udev Devices... 
 +         ​Starting Coldplug All udev Devices... 
 +[   ​20.893271] systemd[1]: Mounted Huge Pages File System. 
 +[  OK  ] Mounted Huge Pages File System. 
 +[   ​20.918303] systemd[1]: Mounted POSIX Message Queue File System. 
 +[  OK  ] Mounted POSIX Message Queue File System. 
 +[   ​20.940989] systemd[1]: Mounted RPC Pipe File System. 
 +[  OK  ] Mounted RPC Pipe File System. 
 +[   ​20.956993] systemd[1]: Mounted Kernel Debug File System. 
 +[  OK  ] Mounted Kernel Debug File System. 
 +[   ​20.977388] systemd[1]: Finished Restore / save the current clock. 
 +[  OK  ] Finished Restore / save the current clock. 
 +[   ​21.001586] systemd[1]: Finished Set the console keyboard layout. 
 +[  OK  ] Finished Set the console keyboard layout. 
 +[   ​21.027051] systemd[1]: Started Journal Service. 
 +[  OK  ] Started Journal Service. 
 +[  OK  ] Finished Load Kernel Module configfs. 
 +[  OK  ] Finished Load Kernel Module drm. 
 +[  OK  ] Finished Load Kernel Module fuse. 
 +[FAILED] Failed to start Load Kernel Modules. 
 +See '​systemctl status systemd-modules-load.service'​ for details. 
 +         ​Mounting FUSE Control File System... 
 +         ​Mounting Kernel Configuration File System... 
 +         ​Starting Apply Kernel Variables... 
 +[  OK  ] Mounted FUSE Control File System. 
 +[  OK  ] Mounted Kernel Configuration File System. 
 +[  OK  ] Finished Apply Kernel Variables. 
 +[  OK  ] Finished Coldplug All udev Devices. 
 +         ​Starting Helper to synchronize boot up for ifupdown... 
 +         ​Starting Wait for udev To �…plete Device Initialization... 
 +[  OK  ] Finished Helper to synchronize boot up for ifupdown. 
 +[  OK  ] Finished Remount Root and Kernel File Systems. 
 +         ​Starting Flush Journal to Persistent Storage... 
 +         ​Starting Load/Save Random Seed... 
 +         ​Starting Create System Users... 
 +[  OK  ] Finished Create System Users. 
 +[  OK  ] Finished Load/Save Random Seed. 
 +         ​Starting Create Static Device Nodes in /dev... 
 +[  OK  ] Finished Create Static Device Nodes in /dev. 
 +[  OK  ] Reached target Local File Systems (Pre). 
 +         ​Starting Rule-based Manage�…for Device Events and Files... 
 +[  OK  ] Finished Flush Journal to Persistent Storage. 
 +[  OK  ] Started Rule-based Manager for Device Events and Files. 
 +         ​Starting Show Plymouth Boot Screen... 
 +[  OK  ] Started Show Plymouth Boot Screen. 
 +[  OK  ] Started Forward Password R�…s to Plymouth Directory Watch. 
 +[  OK  ] Reached target Local Encrypted Volumes. 
 +[  OK  ] Found device /​dev/​ttyPS0. 
 +[  OK  ] Found device /​dev/​disk/​by-partuuid/​ce8c84ab-01. 
 +[  OK  ] Found device /​dev/​ttyS0. 
 +[  OK  ] Reached target Hardware activated USB gadget. 
 +[  OK  ] Listening on Load/Save RF �…itch Status /dev/rfkill Watch. 
 +         ​Starting File System Check�…isk/​by-partuuid/​ce8c84ab-01... 
 +         ​Starting Load Kernel Modules... 
 +[FAILED] Failed to start Load Kernel Modules. 
 +See '​systemctl status systemd-modules-load.service'​ for details. 
 +[  OK  ] Finished Wait for udev To Complete Device Initialization. 
 +[  OK  ] Finished File System Check�…/​disk/​by-partuuid/​ce8c84ab-01. 
 +         ​Mounting /boot... 
 +[  OK  ] Started File System Check Daemon to report status. 
 +         ​Starting Load Kernel Modules... 
 +[  OK  ] Mounted /boot. 
 +[  OK  ] Reached target Local File Systems. 
 +         ​Starting Set console font and keymap... 
 +         ​Starting Preprocess NFS configuration... 
 +         ​Starting Tell Plymouth To Write Out Runtime Data... 
 +         ​Starting Create Volatile Files and Directories... 
 +[  OK  ] Finished Set console font and keymap. 
 +[  OK  ] Finished Preprocess NFS configuration. 
 +[FAILED] Failed to start Load Kernel Modules. 
 +See '​systemctl status systemd-modules-load.service'​ for details. 
 +[  OK  ] Finished Tell Plymouth To Write Out Runtime Data. 
 +         ​Starting Raise network interfaces... 
 +[  OK  ] Reached target NFS client services. 
 +[  OK  ] Reached target Remote File Systems (Pre). 
 +[  OK  ] Reached target Remote File Systems. 
 +[  OK  ] Finished Create Volatile Files and Directories. 
 +         ​Starting Update UTMP about System Boot/​Shutdown... 
 +[  OK  ] Finished Update UTMP about System Boot/​Shutdown. 
 +[  OK  ] Reached target System Initialization. 
 +[  OK  ] Started CUPS Scheduler. 
 +[  OK  ] Started Daily apt download activities. 
 +[  OK  ] Started Daily apt upgrade and clean activities. 
 +[  OK  ] Started Periodic ext4 Onli�…ata Check for All Filesystems. 
 +[  OK  ] Started Discard unused blocks once a week. 
 +[  OK  ] Started Daily rotation of log files. 
 +[  OK  ] Started Daily man-db regeneration. 
 +[  OK  ] Started Daily Cleanup of Temporary Directories. 
 +[  OK  ] Reached target Paths. 
 +[  OK  ] Reached target Timers. 
 +[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. 
 +[  OK  ] Listening on CUPS Scheduler. 
 +[  OK  ] Listening on D-Bus System Message Bus Socket. 
 +[  OK  ] Listening on Erlang Port Mapper Daemon Activation Socket. 
 +[  OK  ] Listening on GPS (Global P�…ioning System) Daemon Sockets. 
 +[  OK  ] Listening on triggerhappy.socket. 
 +[  OK  ] Reached target Sockets. 
 +[  OK  ] Reached target Basic System. 
 +         ​Starting Save/​Restore Sound Card State... 
 +         ​Starting Avahi mDNS/DNS-SD Stack... 
 +[  OK  ] Started Regular background program processing daemon. 
 +[  OK  ] Started D-Bus System Message Bus. 
 +         ​Starting dphys-swapfile - �…unt, and delete a swap file... 
 +         ​Starting Remove Stale Onli�…t4 Metadata Check Snapshots... 
 +         ​Starting Creating IIOD Context Attributes...... 
 +         ​Starting Authorization Manager... 
 +         ​Starting DHCP Client Daemon... 
 +         ​Starting LSBSwitch to on�…nless shift key is pressed)... 
 +         ​Starting LSB: rng-tools ​(Debian variant)... 
 +         ​Starting System Logging Service... 
 +         ​Starting User Login Management... 
 +         ​Starting triggerhappy global hotkey daemon... 
 +         ​Starting Disk Manager... 
 +         ​Starting WPA supplicant... 
 +[  OK  ] Finished Save/​Restore Sound Card State. 
 +[  OK  ] Reached target Sound Card. 
 +[  OK  ] Finished Remove Stale Onli�…ext4 Metadata Check Snapshots. 
 +[  OK  ] Started triggerhappy global hotkey daemon. 
 +[  OK  ] Started DHCP Client Daemon. 
 +[  OK  ] Finished Raise network interfaces. 
 +[  OK  ] Finished dphys-swapfile - �…mountand delete a swap file. 
 + OK  Started LSB: rng-tools (Debian variant). 
 +[  OK  ] Started System Logging Service. 
 +[  OK  ] Started User Login Management
 +[  OK  ] Started Avahi mDNS/DNS-SD Stack. 
 +[  OK  ] Started WPA supplicant. 
 +[  OK  ] Reached target Network. 
 +[  OK  ] Reached target Network ​is Online. 
 +         ​Starting CUPS Scheduler... 
 +[  OK  ] Started Erlang Port Mapper Daemon. 
 +         ​Starting Load USB gadget scheme... 
 +         ​Starting HTTP based time synchronization tool... 
 +         ​Starting Internet superserver... 
 +         ​Starting ​/etc/rc.local Compatibility... 
 +         Starting OpenBSD Secure Shell server... 
 +         ​Starting Permit User Sessions... 
 +[  OK  ] Started Unattended Upgrades Shutdown. 
 +[  OK  ] Started ​/etc/rc.local Compatibility. 
 +[  OK  ] Finished Permit User Sessions. 
 +         ​Starting Light Display Manager... 
 +         ​Starting Hold until boot process finishes up... 
 +[  OK  ] Started Authorization Manager. 
 +         ​Starting Modem Manager... 
 +[  OK  ] Started HTTP based time synchronization tool. 
 +[  OK  ] Started Internet superserver. 
 +[  OK  ] Finished Load USB gadget scheme. 
 +         ​Mounting Mount FunctionFS instance... 
 +[  OK  ] Found device ​/dev/ttyGS0. 
 + OK  Mounted Mount FunctionFS instance. 
 +[  OK  ] Finished Creating IIOD Context Attributes.... 
 +[  OK  ] Started ​IIO Daemon
 +         ​Starting IIO Daemon with USB FFS support... 
 +         ​Stopping IIO Daemon... 
 +[  OK  ] Stopped IIO Daemon. 
 +[  OK  ] Started IIO Daemon with USB FFS support. 
 +         ​Starting Start USB gadget scheme... 
 +[  OK  ] Started OpenBSD Secure Shell server. 
 +[  OK  ] Started LSB: Switch to ond�…(unless shift key is pressed). 
 + 
 +Raspbian GNU/Linux 11 analog ttyPS0
  
-Last login: ​Thu Jan  1 00:00:25 UTC 1970 on tty1 +analog ​login: ​root (automatic login)
-Welcome to Linaro 14.04 (GNU/Linux 4.14.0-12222-g6598c88 aarch64)+
  
- * Documentation: ​ https://​wiki.analog.com/ https://​ez.analog.com/​+Linux analog ​5.10.0-98248-g1bbe32fa5182 #1143 SMP Wed Aug 3 18:38:55 IST 2022 aarch64
  
-New release '​16.04.6 LTS' available. +The programs included with the Debian GNU/Linux system are free software; 
-Run '​do-release-upgrade'​ to upgrade to it.+the exact distribution terms for each program are described in the 
 +individual files in /​usr/​share/​doc/​*/​copyright.
  
-root@analog:​~# ​+Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent 
 +permitted by applicable law. 
 +Last login: Wed Aug 17 12:17:14 BST 2022 on ttyPS0 
 +root@analog:​~#​
 </​code></​WRAP>​ </​code></​WRAP>​
  
resources/eval/user-guides/adrv9009-zu11eg/quick-start-guide.txt · Last modified: 28 Oct 2022 12:42 by Andrei Dragomir