This version is outdated by a newer approved version.
This version (09 Dec 2019 18:12) was approved by Brian OLoughlin.The Previously approved version (24 Oct 2019 17:47) is available.
This version (09 Dec 2019 18:12) was approved by Brian OLoughlin.The Previously approved version (24 Oct 2019 17:47) is available.This is an old revision of the document!
Table of Contents
ADRV9009-ZU11EG RF-SOM Hardware Overview
ADRV9009-ZU11EG RF-SOM Complete Prototyping System
Mechanical Reference Material
The X-Y Footprint is located here:
The 3D model is located here:
The Heat spreader plate 3D model is located here:
Note: Thermal material being used is Panasonic EYG-T7070A10A. The Power Control sequencer shuts down when the PCB reaches 90C.
Electrical Reference Material
The FMC connector pinouts are located here:
The System Clocking Tree Diagram is located here:
Power Reference Material
The System Power Map Diagram is located here:
Power sequence:
ADRV9009-ZU11EG Schematics, BOM & Errata
The versions below are at X-GRADE Revision.
resources/eval/user-guides/adrv9009-zu11eg/hardware.1575911528.txt.gz · Last modified: 09 Dec 2019 18:12 by Brian OLoughlin