This version is outdated by a newer approved version.
This version (24 Oct 2019 17:47) was approved by Brian OLoughlin.The Previously approved version (21 Oct 2019 15:51) is available.
This version (24 Oct 2019 17:47) was approved by Brian OLoughlin.The Previously approved version (21 Oct 2019 15:51) is available.This is an old revision of the document!
Table of Contents
ADRV9009-ZU11EG RF-SOM Hardware Overview
ADRV9009-ZU11EG RF-SOM Complete Prototyping System
Hardware Reference Material
Power sequence:
The X-Y Footprint is located here:
The 3D model is located here:
The Heat spreader plate 3D model is located here:
Note: Thermal material being used is Panasonic EYG-T7070A10A. The Power Control sequencer shuts down when the PCB reaches 90C.
The FMC connector pinouts are located here:
The System Clocking Tree Diagram is located here:
The System Power Map Diagram is located here:
ADRV9009-ZU11EG Schematics & BOM
The versions below are at X-GRADE Revision.
resources/eval/user-guides/adrv9009-zu11eg/hardware.1571932037.txt.gz · Last modified: 24 Oct 2019 17:47 by Brian OLoughlin