Differences

This shows you the differences between two versions of the page.

--- resources:eval:user-guides:ad9695_fmc [15 Nov 2022 14:48]
Liviu-Mihai Iacob Change setup photo (Covered BROKEN BY DRAGOS TAG) & add Required Hardware section
+++ resources:eval:user-guides:ad9695_fmc [21 Dec 2022 10:48]
Liviu-Mihai Iacob Add maxim parts to devices
@@ Line 87: / Line 87: @@
 {{resources:eval:user-guides:setup_ad9695_zcu102_1.jpg}}
+=== Messages ===
+<hidden Complete kernel boot log (Click to expand)>
+<WRAP box bggreen><wrap info>This specifies any shell prompt running on the target</wrap>
+<code>
+[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
+[    0.000000] Linux version 5.10.0-98248-g1bbe32fa5182 (jenkins@romlxbuild1.adlk.analog.com) (aarch64-xilinx-linux-gcc.real (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35.0.20200730) #1143 SMP Wed Aug 3 18:38:55 IST 2022
+[    0.000000] Machine model: ZynqMP ZCU102 Rev1.0
+[    0.000000] earlycon: cdns0 at MMIO 0x00000000ff000000 (options '115200n8')
+[    0.000000] printk: bootconsole [cdns0] enabled
+[    0.000000] efi: UEFI not found.
+[    0.000000] cma: Reserved 256 MiB at 0x0000000070000000
+[    0.000000] Zone ranges:
+[    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff]
+[    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000ffffffff]
+[    0.000000]   Normal   [mem 0x0000000100000000-0x000000087fffffff]
+[    0.000000] Movable zone start for each node
+[    0.000000] Early memory node ranges
+[    0.000000]   node   0: [mem 0x0000000000000000-0x000000007fffffff]
+[    0.000000]   node   0: [mem 0x0000000800000000-0x000000087fffffff]
+[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000087fffffff]
+[    0.000000] On node 0 totalpages: 1048576
+[    0.000000]   DMA zone: 3584 pages used for memmap
+[    0.000000]   DMA zone: 0 pages reserved
+[    0.000000]   DMA zone: 262144 pages, LIFO batch:63
+[    0.000000]   DMA32 zone: 3584 pages used for memmap
+[    0.000000]   DMA32 zone: 262144 pages, LIFO batch:63
+[    0.000000]   Normal zone: 7168 pages used for memmap
+[    0.000000]   Normal zone: 524288 pages, LIFO batch:63
+[    0.000000] psci: probing for conduit method from DT.
+[    0.000000] psci: PSCIv1.1 detected in firmware.
+[    0.000000] psci: Using standard PSCI v0.2 function IDs
+[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
+[    0.000000] psci: SMC Calling Convention v1.2
+[    0.000000] percpu: Embedded 22 pages/cpu s49496 r8192 d32424 u90112
+[    0.000000] pcpu-alloc: s49496 r8192 d32424 u90112 alloc=22*4096
+[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
+[    0.000000] Detected VIPT I-cache on CPU0
+[    0.000000] CPU features: detected: ARM erratum 845719
+[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1034240
+[    0.000000] Kernel command line: console=ttyPS0,115200 root=/dev/mmcblk0p2 rw earlycon rootfstype=ext4 rootwait clk_ignore_unused cpuidle.off=1 root=/dev/mmcblk0p2 rw rootwait
+[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
+[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
+[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
+[    0.000000] software IO TLB: mapped [mem 0x000000003bfff000-0x000000003ffff000] (64MB)
+[    0.000000] Memory: 3761576K/4194304K available (15488K kernel code, 1672K rwdata, 11952K rodata, 2496K init, 507K bss, 170584K reserved, 262144K cma-reserved)
+[    0.000000] rcu: Hierarchical RCU implementation.
+[    0.000000] rcu: 	RCU event tracing is enabled.
+[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
+[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
+[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
+[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
+[    0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
+[    0.000000] GIC: Using split EOI/Deactivate mode
+[    0.000000] random: get_random_bytes called from start_kernel+0x31c/0x550 with crng_init=0
+[    0.000000] arch_timer: cp15 timer(s) running at 100.00MHz (phys).
+[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x171024e7e0, max_idle_ns: 440795205315 ns
+[    0.000003] sched_clock: 56 bits at 100MHz, resolution 10ns, wraps every 4398046511100ns
+[    0.008460] Console: colour dummy device 80x25
+[    0.012482] Calibrating delay loop (skipped), value calculated using timer frequency.. 200.00 BogoMIPS (lpj=400000)
+[    0.022841] pid_max: default: 32768 minimum: 301
+[    0.027560] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
+[    0.034788] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
+[    0.043409] rcu: Hierarchical SRCU implementation.
+[    0.047553] EFI services will not be available.
+[    0.051939] smp: Bringing up secondary CPUs ...
+[    0.056659] Detected VIPT I-cache on CPU1
+[    0.056698] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
+[    0.057065] Detected VIPT I-cache on CPU2
+[    0.057089] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
+[    0.057427] Detected VIPT I-cache on CPU3
+[    0.057450] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
+[    0.057496] smp: Brought up 1 node, 4 CPUs
+[    0.091780] SMP: Total of 4 processors activated.
+[    0.096452] CPU features: detected: 32-bit EL0 Support
+[    0.101555] CPU features: detected: CRC32 instructions
+[    0.106694] CPU: All CPU(s) started at EL2
+[    0.110736] alternatives: patching kernel code
+[    0.116173] devtmpfs: initialized
+[    0.124277] Registered cp15_barrier emulation handler
+[    0.124327] Registered setend emulation handler
+[    0.128308] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
+[    0.137890] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
+[    0.151251] pinctrl core: initialized pinctrl subsystem
+[    0.151892] NET: Registered protocol family 16
+[    0.156335] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
+[    0.162327] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
+[    0.170055] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
+[    0.177862] audit: initializing netlink subsys (disabled)
+[    0.183314] audit: type=2000 audit(0.116:1): state=initialized audit_enabled=0 res=1
+[    0.183661] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
+[    0.197688] ASID allocator initialised with 65536 entries
+[    0.223211] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
+[    0.224270] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
+[    0.230941] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
+[    0.237606] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
+[    1.302908] DRBG: Continuing without Jitter RNG
+[    1.381012] raid6: neonx8   gen()  2149 MB/s
+[    1.449068] raid6: neonx8   xor()  1597 MB/s
+[    1.517125] raid6: neonx4   gen()  2193 MB/s
+[    1.585177] raid6: neonx4   xor()  1561 MB/s
+[    1.653252] raid6: neonx2   gen()  2074 MB/s
+[    1.721299] raid6: neonx2   xor()  1434 MB/s
+[    1.789367] raid6: neonx1   gen()  1776 MB/s
+[    1.857412] raid6: neonx1   xor()  1220 MB/s
+[    1.925471] raid6: int64x8  gen()  1438 MB/s
+[    1.993531] raid6: int64x8  xor()   771 MB/s
+[    2.061597] raid6: int64x4  gen()  1599 MB/s
+[    2.129650] raid6: int64x4  xor()   815 MB/s
+[    2.197722] raid6: int64x2  gen()  1399 MB/s
+[    2.265775] raid6: int64x2  xor()   747 MB/s
+[    2.333852] raid6: int64x1  gen()  1034 MB/s
+[    2.401898] raid6: int64x1  xor()   517 MB/s
+[    2.401936] raid6: using algorithm neonx4 gen() 2193 MB/s
+[    2.405884] raid6: .... xor() 1561 MB/s, rmw enabled
+[    2.410819] raid6: using neon recovery algorithm
+[    2.415807] iommu: Default domain type: Translated
+[    2.420451] SCSI subsystem initialized
+[    2.423986] libata version 3.00 loaded.
+[    2.424114] usbcore: registered new interface driver usbfs
+[    2.429443] usbcore: registered new interface driver hub
+[    2.434718] usbcore: registered new device driver usb
+[    2.439846] mc: Linux media interface: v0.10
+[    2.443966] videodev: Linux video capture interface: v2.00
+[    2.449459] EDAC MC: Ver: 3.0.0
+[    2.452879] zynqmp-ipi-mbox mailbox@ff990400: Registered ZynqMP IPI mbox with TX/RX channels.
+[    2.461324] jesd204: found 0 devices and 0 topologies
+[    2.466034] FPGA manager framework
+[    2.469505] Advanced Linux Sound Architecture Driver Initialized.
+[    2.475811] Bluetooth: Core ver 2.22
+[    2.478992] NET: Registered protocol family 31
+[    2.483393] Bluetooth: HCI device and connection manager initialized
+[    2.489710] Bluetooth: HCI socket layer initialized
+[    2.494552] Bluetooth: L2CAP socket layer initialized
+[    2.499576] Bluetooth: SCO socket layer initialized
+[    2.504776] clocksource: Switched to clocksource arch_sys_counter
+[    2.510570] VFS: Disk quotas dquot_6.6.0
+[    2.514414] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
+[    2.525104] NET: Registered protocol family 2
+[    2.525850] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
+[    2.534039] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
+[    2.542068] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
+[    2.549514] TCP: Hash tables configured (established 32768 bind 32768)
+[    2.555688] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
+[    2.562353] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
+[    2.569518] NET: Registered protocol family 1
+[    2.573984] RPC: Registered named UNIX socket transport module.
+[    2.579589] RPC: Registered udp transport module.
+[    2.584256] RPC: Registered tcp transport module.
+[    2.588925] RPC: Registered tcp NFSv4.1 backchannel transport module.
+[    2.595917] PCI: CLS 0 bytes, default 64
+[    2.599621] hw perfevents: no interrupt-affinity property for /pmu, guessing.
+[    2.606481] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
+[    2.614806] Initialise system trusted keyrings
+[    2.618524] workingset: timestamp_bits=62 max_order=20 bucket_order=0
+[    2.625408] NFS: Registering the id_resolver key type
+[    2.629854] Key type id_resolver registered
+[    2.633994] Key type id_legacy registered
+[    2.637983] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
+[    2.644648] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
+[    2.651817] fuse: init (API version 7.32)
+[    2.690955] NET: Registered protocol family 38
+[    2.690998] xor: measuring software checksum speed
+[    2.698686]    8regs           :  2363 MB/sec
+[    2.702351]    32regs          :  2799 MB/sec
+[    2.707293]    arm64_neon      :  2380 MB/sec
+[    2.707484] xor: using function: 32regs (2799 MB/sec)
+[    2.712510] Key type asymmetric registered
+[    2.716571] Asymmetric key parser 'x509' registered
+[    2.721434] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
+[    2.728769] io scheduler mq-deadline registered
+[    2.733265] io scheduler kyber registered
+[    2.762472] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+[    2.766891] cacheinfo: Unable to detect cache hierarchy for CPU 0
+[    2.773435] brd: module loaded
+[    2.777653] loop: module loaded
+[    2.777938] Registered mathworks_ip class
+[    2.781417] libphy: Fixed MDIO Bus: probed
+[    2.784422] tun: Universal TUN/TAP device driver, 1.6
+[    2.788532] CAN device driver interface
+[    2.793020] usbcore: registered new interface driver asix
+[    2.797656] usbcore: registered new interface driver ax88179_178a
+[    2.803687] usbcore: registered new interface driver cdc_ether
+[    2.809483] usbcore: registered new interface driver net1080
+[    2.815108] usbcore: registered new interface driver cdc_subset
+[    2.820988] usbcore: registered new interface driver zaurus
+[    2.826537] usbcore: registered new interface driver cdc_ncm
+[    2.832918] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+[    2.838619] ehci-pci: EHCI PCI platform driver
+[    2.843395] usbcore: registered new interface driver uas
+[    2.848335] usbcore: registered new interface driver usb-storage
+[    2.854325] usbcore: registered new interface driver usbserial_generic
+[    2.860778] usbserial: USB Serial support registered for generic
+[    2.866747] usbcore: registered new interface driver ftdi_sio
+[    2.872448] usbserial: USB Serial support registered for FTDI USB Serial Device
+[    2.879721] usbcore: registered new interface driver upd78f0730
+[    2.885595] usbserial: USB Serial support registered for upd78f0730
+[    2.893221] rtc_zynqmp ffa60000.rtc: registered as rtc0
+[    2.897019] rtc_zynqmp ffa60000.rtc: setting system clock to 2022-12-21T08:48:43 UTC (1671612523)
+[    2.905879] i2c /dev entries driver
+[    2.911091] usbcore: registered new interface driver uvcvideo
+[    2.914995] USB Video Class driver (1.1.1)
+[    2.920523] Bluetooth: HCI UART driver ver 2.3
+[    2.923474] Bluetooth: HCI UART protocol H4 registered
+[    2.928574] Bluetooth: HCI UART protocol BCSP registered
+[    2.933866] Bluetooth: HCI UART protocol LL registered
+[    2.938955] Bluetooth: HCI UART protocol ATH3K registered
+[    2.944331] Bluetooth: HCI UART protocol Three-wire (H5) registered
+[    2.950582] Bluetooth: HCI UART protocol Intel registered
+[    2.955921] Bluetooth: HCI UART protocol QCA registered
+[    2.961122] usbcore: registered new interface driver bcm203x
+[    2.966743] usbcore: registered new interface driver bpa10x
+[    2.972283] usbcore: registered new interface driver bfusb
+[    2.977729] usbcore: registered new interface driver btusb
+[    2.983190] usbcore: registered new interface driver ath3k
+[    2.988677] EDAC MC: ECC not enabled
+[    2.992297] EDAC DEVICE0: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
+[    3.004608] sdhci: Secure Digital Host Controller Interface driver
+[    3.010409] sdhci: Copyright(c) Pierre Ossman
+[    3.014729] sdhci-pltfm: SDHCI platform and OF driver helper
+[    3.020759] ledtrig-cpu: registered to indicate activity on CPUs
+[    3.026331] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
+[    3.032758] zynqmp_firmware_probe Platform Management API v1.1
+[    3.038519] zynqmp_firmware_probe Trustzone version v1.0
+[    3.073689] zynqmp-pinctrl firmware:zynqmp-firmware:pinctrl: zynqmp pinctrl initialized
+[    3.118900] zynqmp-aes firmware:zynqmp-firmware:zynqmp-aes: will run requests pump with realtime priority
+[    3.134934] alg: No test for xilinx-keccak-384 (zynqmp-keccak-384)
+[    3.135643] alg: No test for xilinx-zynqmp-rsa (zynqmp-rsa)
+[    3.141159] usbcore: registered new interface driver usbhid
+[    3.146548] usbhid: USB HID core driver
+[    3.157479] axi_adxcvr 84a60000.axi-adxcvr-rx: AXI-ADXCVR-RX (17.05.a) using QPLL on GTH4 at 0x84A60000. Number of lanes: 4.
+[    3.163612] axi-jesd204-rx 84aa0000.axi-jesd204-rx: AXI-JESD204-RX (1.07.a) at 0x84AA0000. Encoder 8b10b, width 4/4, lanes 4.
+[    3.175182] axi_sysid 85000000.axi-sysid-0: AXI System ID core version (1.01.a) found
+[    3.182241] axi_sysid 85000000.axi-sysid-0: [ad9695_fmc] [sys rom custom string placeholder] on [zcu102] git branch <hdl_2021_r1> git <6a6c5acc8ec422c068c7787cdeb5b0ee4ae1aa51> clean [2022-05-20 22:58:48] UTC
+[    3.201038] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
+[    3.207377] usbcore: registered new interface driver snd-usb-audio
+[    3.214767] pktgen: Packet Generator for packet performance testing. Version: 2.75
+[    3.221046] Initializing XFRM netlink socket
+[    3.224874] NET: Registered protocol family 10
+[    3.229592] Segment Routing with IPv6
+[    3.232981] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
+[    3.239043] NET: Registered protocol family 17
+[    3.243143] NET: Registered protocol family 15
+[    3.247639] can: controller area network core
+[    3.251897] NET: Registered protocol family 29
+[    3.256286] can: raw protocol
+[    3.259222] can: broadcast manager protocol
+[    3.263377] can: netlink gateway - max_hops=1
+[    3.267777] Bluetooth: RFCOMM TTY layer initialized
+[    3.272551] Bluetooth: RFCOMM socket layer initialized
+[    3.277662] Bluetooth: RFCOMM ver 1.11
+[    3.281369] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
+[    3.286641] Bluetooth: BNEP filters: protocol multicast
+[    3.291834] Bluetooth: BNEP socket layer initialized
+[    3.296765] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
+[    3.302646] Bluetooth: HIDP socket layer initialized
+[    3.307698] 9pnet: Installing 9P2000 support
+[    3.311824] NET: Registered protocol family 36
+[    3.316239] Key type dns_resolver registered
+[    3.320670] registered taskstats version 1
+[    3.324536] Loading compiled-in X.509 certificates
+[    3.329655] Btrfs loaded, crc32c=crc32c-generic
+[    3.342459] ff000000.serial: ttyPS0 at MMIO 0xff000000 (irq = 48, base_baud = 6249999) is a xuartps
+[    3.351484] printk: console [ttyPS0] enabled
+[    3.355781] printk: bootconsole [cdns0] disabled
+[    3.365408] ff010000.serial: ttyPS1 at MMIO 0xff010000 (irq = 49, base_baud = 6249999) is a xuartps
+[    3.378627] of-fpga-region fpga-full: FPGA Region probed
+[    3.385578] nwl-pcie fd0e0000.pcie: host bridge /axi/pcie@fd0e0000 ranges:
+[    3.392472] nwl-pcie fd0e0000.pcie:      MEM 0x00e0000000..0x00efffffff -> 0x00e0000000
+[    3.400480] nwl-pcie fd0e0000.pcie:      MEM 0x0600000000..0x07ffffffff -> 0x0600000000
+[    3.408547] nwl-pcie fd0e0000.pcie: Link is DOWN
+[    3.413305] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
+[    3.419482] pci_bus 0000:00: root bus resource [bus 00-ff]
+[    3.424962] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
+[    3.431828] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
+[    3.439332] pci 0000:00:00.0: [10ee:d021] type 01 class 0x060400
+[    3.445393] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
+[    3.455674] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
+[    3.461466] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
+[    3.468640] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
+[    3.475807] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
+[    3.482979] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
+[    3.490143] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
+[    3.497314] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
+[    3.504497] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
+[    3.511659] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
+[    3.519039] xilinx-zynqmp-dpdma fd4c0000.dma-controller: Xilinx DPDMA engine is probed
+[    3.527580] ahci-ceva fd0c0000.ahci: supply ahci not found, using dummy regulator
+[    3.535128] ahci-ceva fd0c0000.ahci: supply phy not found, using dummy regulator
+[    3.560096] ad9208 spi1.0: ad9695 PLL LOCKED
+[    3.572922] ad9208 spi1.0: ad9695 Rev. 2 Grade 0 (API 1.0.1) probed
+[    3.579859] spi-nor spi0.0: SPI-NOR-UniqueID 2ab990001501002a00e62e735a86
+[    3.586644] spi-nor spi0.0: found mt25qu512a, expected m25p80
+[    3.593032] spi-nor spi0.0: trying to lock already unlocked area
+[    3.599037] spi-nor spi0.0: mt25qu512a (131072 Kbytes)
+[    3.604194] 4 fixed-partitions partitions found on MTD device spi0.0
+[    3.610541] Creating 4 MTD partitions on "spi0.0":
+[    3.615325] 0x000000000000-0x000000100000 : "qspi-fsbl-uboot"
+[    3.621855] 0x000000100000-0x000000600000 : "qspi-linux"
+[    3.627826] 0x000000600000-0x000000620000 : "qspi-device-tree"
+[    3.634381] 0x000000620000-0x000000c00000 : "qspi-rootfs"
+[    3.642891] macb ff0e0000.ethernet: Not enabling partial store and forward
+[    3.650402] libphy: MACB_mii_bus: probed
+[    3.655048] macb ff0e0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0e0000 irq 30 (00:0a:35:04:c2:ab)
+[    3.665264] xilinx-axipmon ffa00000.perf-monitor: Probed Xilinx APM
+[    3.671830] xilinx-axipmon fd0b0000.perf-monitor: Probed Xilinx APM
+[    3.678350] xilinx-axipmon fd490000.perf-monitor: Probed Xilinx APM
+[    3.684886] xilinx-axipmon ffa10000.perf-monitor: Probed Xilinx APM
+[    3.694907] pca953x 0-0020: supply vcc not found, using dummy regulator
+[    3.701587] pca953x 0-0020: using no AI
+[    3.706072] gpio-496 (sel0): hogged as output/low
+[    3.710970] gpio-497 (sel1): hogged as output/high
+[    3.715956] gpio-498 (sel2): hogged as output/high
+[    3.720946] gpio-499 (sel3): hogged as output/high
+[    3.726128] pca953x 0-0021: supply vcc not found, using dummy regulator
+[    3.732806] pca953x 0-0021: using no AI
+[    3.738591] ina2xx 2-0040: power monitor ina226 (Rshunt = 5000 uOhm)
+[    3.745618] ina2xx 2-0041: power monitor ina226 (Rshunt = 5000 uOhm)
+[    3.752640] ina2xx 2-0042: power monitor ina226 (Rshunt = 5000 uOhm)
+[    3.759666] ina2xx 2-0043: power monitor ina226 (Rshunt = 5000 uOhm)
+[    3.766694] ina2xx 2-0044: power monitor ina226 (Rshunt = 5000 uOhm)
+[    3.773712] ina2xx 2-0045: power monitor ina226 (Rshunt = 5000 uOhm)
+[    3.780746] ina2xx 2-0046: power monitor ina226 (Rshunt = 5000 uOhm)
+[    3.787772] ina2xx 2-0047: power monitor ina226 (Rshunt = 5000 uOhm)
+[    3.794848] ina2xx 2-004a: power monitor ina226 (Rshunt = 5000 uOhm)
+[    3.801880] ina2xx 2-004b: power monitor ina226 (Rshunt = 5000 uOhm)
+[    3.808283] i2c i2c-0: Added multiplexed i2c bus 2
+[    3.813870] ina2xx 3-0040: power monitor ina226 (Rshunt = 2000 uOhm)
+[    3.820899] ina2xx 3-0041: power monitor ina226 (Rshunt = 5000 uOhm)
+[    3.827919] ina2xx 3-0042: power monitor ina226 (Rshunt = 5000 uOhm)
+[    3.834951] ina2xx 3-0043: power monitor ina226 (Rshunt = 5000 uOhm)
+[    3.841981] ina2xx 3-0044: power monitor ina226 (Rshunt = 5000 uOhm)
+[    3.849006] ina2xx 3-0045: power monitor ina226 (Rshunt = 5000 uOhm)
+[    3.856034] ina2xx 3-0046: power monitor ina226 (Rshunt = 5000 uOhm)
+[    3.863062] ina2xx 3-0047: power monitor ina226 (Rshunt = 5000 uOhm)
+[    3.869466] i2c i2c-0: Added multiplexed i2c bus 3
+[    3.877760] random: fast init done
+[    3.928546] i2c i2c-0: Added multiplexed i2c bus 4
+[    3.933563] i2c i2c-0: Added multiplexed i2c bus 5
+[    3.938356] pca954x 0-0075: registered 4 multiplexed busses for I2C mux pca9544
+[    3.945707] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32
+[    3.953499] at24 6-0054: supply vcc not found, using dummy regulator
+[    3.960389] at24 6-0054: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
+[    3.967136] i2c i2c-1: Added multiplexed i2c bus 6
+[    3.973584] si5341 7-0036: Chip: 5341 Grade: 1 Rev: 1
+[    4.011343] i2c i2c-1: Added multiplexed i2c bus 7
+[    4.019000] si570 8-005d: registered, current frequency 300000000 Hz
+[    4.025403] i2c i2c-1: Added multiplexed i2c bus 8
+[    4.045178] si570 9-005d: registered, current frequency 148500000 Hz
+[    4.051581] i2c i2c-1: Added multiplexed i2c bus 9
+[    4.056626] si5324 10-0069: si5328 probed
+[    4.125126] si5324 10-0069: si5328 probe successful
+[    4.130051] i2c i2c-1: Added multiplexed i2c bus 10
+[    4.135082] i2c i2c-1: Added multiplexed i2c bus 11
+[    4.140105] i2c i2c-1: Added multiplexed i2c bus 12
+[    4.145131] i2c i2c-1: Added multiplexed i2c bus 13
+[    4.150008] pca954x 1-0074: registered 8 multiplexed busses for I2C switch pca9548
+[    4.158120] at24 14-0050: supply vcc not found, using dummy regulator
+[    4.190934] i2c i2c-1: Added multiplexed i2c bus 14
+[    4.195973] i2c i2c-1: Added multiplexed i2c bus 15
+[    4.201015] i2c i2c-1: Added multiplexed i2c bus 16
+[    4.206049] i2c i2c-1: Added multiplexed i2c bus 17
+[    4.211100] i2c i2c-1: Added multiplexed i2c bus 18
+[    4.216132] i2c i2c-1: Added multiplexed i2c bus 19
+[    4.221169] i2c i2c-1: Added multiplexed i2c bus 20
+[    4.226203] i2c i2c-1: Added multiplexed i2c bus 21
+[    4.231079] pca954x 1-0075: registered 8 multiplexed busses for I2C switch pca9548
+[    4.238688] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33
+[    4.248434] cdns-wdt fd4d0000.watchdog: Xilinx Watchdog Timer with timeout 60s
+[    4.277237] cf_axi_adc 84a00000.axi-ad9695-hpc: ADI AIM (10.01.b) at 0x84A00000 mapped to 0x(____ptrval____), probed ADC AD9208 as MASTER
+[    4.289647] mmc0: SDHCI controller on ff170000.mmc [ff170000.mmc] using ADMA 64-bit
+[    4.297714] zynqmp-display fd4a0000.display: vtc bridge property not present
+[    4.305878] zynqmp_clk_divider_set_rate() set divider failed for spi1_ref_div1, ret = -13
+[    4.315717] xilinx-dp-snd-codec fd4a0000.display:zynqmp_dp_snd_codec0: Failed to get required clock freq
+[    4.325215] xilinx-dp-snd-codec: probe of fd4a0000.display:zynqmp_dp_snd_codec0 failed with error -22
+[    4.334767] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
+[    4.341090] mmc0: new high speed SDHC card at address aaaa
+[    4.342930] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
+[    4.348426] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
+[    4.356263] OF: graph: no port node found in /axi/display@fd4a0000
+[    4.364327]  mmcblk0: p1 p2 p3
+[    4.366714] xlnx-drm xlnx-drm.0: bound fd4a0000.display (ops 0xffffffc010ffd810)
+[    5.456792] zynqmp-display fd4a0000.display: [drm] Cannot find any crtc or sizes
+[    5.464416] [drm] Initialized xlnx 1.0.0 20130509 for fd4a0000.display on minor 0
+[    5.471906] zynqmp-display fd4a0000.display: ZynqMP DisplayPort Subsystem driver probed
+[    5.480258] ahci-ceva fd0c0000.ahci: supply ahci not found, using dummy regulator
+[    5.487794] ahci-ceva fd0c0000.ahci: supply phy not found, using dummy regulator
+[    5.495253] ahci-ceva fd0c0000.ahci: supply target not found, using dummy regulator
+[    5.503090] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
+[    5.512046] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
+[    5.522740] scsi host0: ahci-ceva
+[    5.526342] scsi host1: ahci-ceva
+[    5.529770] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 45
+[    5.537685] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 45
+[    5.546510] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
+[    5.552005] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
+[    5.559754] xhci-hcd xhci-hcd.1.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x0000000002010810
+[    5.569179] xhci-hcd xhci-hcd.1.auto: irq 58, io mem 0xfe200000
+[    5.575321] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
+[    5.583586] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+[    5.590807] usb usb1: Product: xHCI Host Controller
+[    5.595675] usb usb1: Manufacturer: Linux 5.10.0-98248-g1bbe32fa5182 xhci-hcd
+[    5.602800] usb usb1: SerialNumber: xhci-hcd.1.auto
+[    5.607963] hub 1-0:1.0: USB hub found
+[    5.611733] hub 1-0:1.0: 1 port detected
+[    5.615834] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
+[    5.621325] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
+[    5.628980] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
+[    5.635601] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
+[    5.643860] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+[    5.651080] usb usb2: Product: xHCI Host Controller
+[    5.655948] usb usb2: Manufacturer: Linux 5.10.0-98248-g1bbe32fa5182 xhci-hcd
+[    5.663074] usb usb2: SerialNumber: xhci-hcd.1.auto
+[    5.668187] hub 2-0:1.0: USB hub found
+[    5.671945] hub 2-0:1.0: 1 port detected
+[    5.685598] input: gpio-keys as /devices/platform/gpio-keys/input/input0
+[    5.692599] of_cfs_init
+[    5.695065] of_cfs_init: OK
+[    5.698028] cfg80211: Loading compiled-in X.509 certificates for regulatory database
+[    5.835909] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
+[    5.842443] clk: Not disabling unused clocks
+[    5.846980] ALSA device list:
+[    5.849937]   No soundcards found.
+[    5.853607] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
+[    5.862217] cfg80211: failed to load regulatory.db
+[    5.862241] ata1: SATA link down (SStatus 0 SControl 330)
+[    5.872413] ata2: SATA link down (SStatus 0 SControl 330)
+[    5.880417] EXT4-fs (mmcblk0p2): Unrecognized mount option "\xfeǉ\xdc/\x8cG<\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff" or missing value
+[    5.893194] EXT4-fs (mmcblk0p2): failed to parse options in superblock: \xfeǉ\xdc/\x8cG<\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff
+[    5.915034] EXT4-fs (mmcblk0p2): warning: mounting fs with errors, running e2fsck is recommended
+[    5.927801] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: \xfeǉ\xdc/\x8cG<\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff; (null)
+[    5.941651] VFS: Mounted root (ext4 filesystem) on device 179:2.
+[    5.957234] devtmpfs: mounted
+[    5.961035] Freeing unused kernel memory: 2496K
+[    5.965646] Run /sbin/init as init process
+[    5.969737]   with arguments:
+[    5.969739]     /sbin/init
+[    5.969741]   with environment:
+[    5.969744]     HOME=/
+[    5.969746]     TERM=linux
+[    6.495814] systemd[1]: systemd 247.3-7+rpi1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
+[    6.519063] systemd[1]: Detected architecture arm64.
+[    6.544806] zynqmp-display fd4a0000.display: [drm] Cannot find any crtc or sizes
+[    6.563449] systemd[1]: Set hostname to <analog>.
+[    7.808367] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
+[    8.015724] systemd[1]: Queued start job for default target Graphical Interface.
+[    8.024310] random: systemd: uninitialized urandom read (16 bytes read)
+[    8.031110] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
+[    8.043463] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
+[    8.052488] systemd[1]: Created slice system-getty.slice.
+[    8.072897] random: systemd: uninitialized urandom read (16 bytes read)
+[    8.079885] systemd[1]: Created slice system-modprobe.slice.
+[    8.100884] random: systemd: uninitialized urandom read (16 bytes read)
+[    8.107824] systemd[1]: Created slice system-serial\x2dgetty.slice.
+[    8.129185] systemd[1]: Created slice system-systemd\x2dfsck.slice.
+[    8.153077] systemd[1]: Created slice User and Session Slice.
+[    8.173117] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
+[    8.197113] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
+[    8.209568] systemd[1]: Reached target Slices.
+[    8.224963] systemd[1]: Reached target Swap.
+[    8.241662] systemd[1]: Listening on Syslog Socket.
+[    8.257180] systemd[1]: Listening on fsck to fsckd communication Socket.
+[    8.281033] systemd[1]: Listening on initctl Compatibility Named Pipe.
+[    8.305514] systemd[1]: Listening on Journal Audit Socket.
+[    8.325187] systemd[1]: Listening on Journal Socket (/dev/log).
+[    8.349233] systemd[1]: Listening on Journal Socket.
+[    8.373927] systemd[1]: Listening on udev Control Socket.
+[    8.397183] systemd[1]: Listening on udev Kernel Socket.
+[    8.418774] systemd[1]: Mounting Huge Pages File System...
+[    8.434551] systemd[1]: Mounting POSIX Message Queue File System...
+[    8.458420] systemd[1]: Mounting RPC Pipe File System...
+[    8.474687] systemd[1]: Mounting Kernel Debug File System...
+[    8.489300] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
+[    8.497955] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
+[    8.512195] systemd[1]: Starting Restore / save the current clock...
+[    8.535658] systemd[1]: Starting Set the console keyboard layout...
+[    8.557628] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped.
+[    8.571135] systemd[1]: Starting Load Kernel Module configfs...
+[    8.591025] systemd[1]: Starting Load Kernel Module drm...
+[    8.610961] systemd[1]: Starting Load Kernel Module fuse...
+[    8.633243] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
+[    8.642540] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
+[    8.653528] systemd[1]: Starting Journal Service...
+[    8.674465] systemd[1]: Starting Load Kernel Modules...
+[    8.690880] systemd[1]: Starting Remount Root and Kernel File Systems...
+[    8.714824] systemd[1]: Starting Coldplug All udev Devices...
+[    8.739921] systemd[1]: Mounted Huge Pages File System.
+[    8.761402] systemd[1]: Mounted POSIX Message Queue File System.
+[    8.793352] systemd[1]: Mounted RPC Pipe File System.
+[    8.809340] systemd[1]: Mounted Kernel Debug File System.
+[    8.829841] systemd[1]: Finished Restore / save the current clock.
+[    8.853906] systemd[1]: Finished Set the console keyboard layout.
+[    8.881979] systemd[1]: modprobe@configfs.service: Succeeded.
+[    8.888226] systemd[1]: Finished Load Kernel Module configfs.
+[    8.910015] systemd[1]: modprobe@drm.service: Succeeded.
+[    8.915881] systemd[1]: Finished Load Kernel Module drm.
+[    8.937650] systemd[1]: Started Journal Service.
+[    9.021839] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
+[    9.165974] systemd-journald[174]: Received client request to flush runtime journal.
+[   10.668817] random: crng init done
+</code>
+</WRAP>
+</hidden>
+=== Make sure all devices are present ===
+<WRAP box bggreen><wrap info>This specifies any shell prompt running on the target</wrap>
+<xterm>
+root@analog:~# iio_info | grep iio:device
+	iio:device0: ams
+	iio:device1: axi-ad9695-hpc (buffer capable)
+root@analog:~# iio_info | grep hwmon
+	hwmon0: ina226
+	hwmon1: ina226
+	hwmon10: ina226
+	hwmon11: ina226
+	hwmon12: ina226
+	hwmon13: ina226
+	hwmon14: ina226
+	hwmon15: ina226
+	hwmon16: ina226
+	hwmon17: ina226
+	hwmon18: max20751
+	hwmon19: max20751
+	hwmon2: ina226
+	hwmon3: ina226
+	hwmon4: ina226
+	hwmon5: ina226
+	hwmon6: ina226
+	hwmon7: ina226
+	hwmon8: ina226
+	hwmon9: ina226
+</xterm></WRAP>

Wiki

Analog Devices Wiki

Differences

Analog Devices Wiki

Differences

Page Tools