Differences

This shows you the differences between two versions of the page.

--- resources:eval:user-guides:ad7616-sdz [12 Dec 2022 12:48] – Stanca-Florina Pop
+++ resources:eval:user-guides:ad7616-sdz [10 Aug 2023 14:33] – [PL Interrupts] Stanca-Florina Pop
@@ Line 75: / Line 75: @@
 <code c>
-$ make SI_OR_PI=0
+$ make SER_PAR_N=1
 </code>
@@ Line 81: / Line 81: @@
 <code c>
-$ make SI_OR_PI=1
+$ make SER_PAR_N=0
 </code>
 <note important>Because of the **SDP-I-FMC** the level of the **VADJ** in the carrier board needs to be set to **3.3V**.</note>
-=== PL Interrupts ===
+==== CPU/Memory interconnects addresses ====
+^ Instance             ^ Address    ^
+|axi_ad7616_dma        | 0x44a30000 |
+|ad7616_pwm_gen        | 0x44b00000 |
+|spi_ad7616_axi_regmap | 0x44a00000 |
+|axi_ad7616            | 0x44a80000 |
+Note:
+  *  spi_ad7616 is instantiated only for SER_PAR_N=1
+  *  axi_ad7616 is instantiated only for SER_PAR_N=0
+==== PL Interrupts ====
 ^ Instance              ^ HDL interrupt ^ Linux PsU interrupt  ^
@@ Line 107: / Line 119: @@
 Note:
-  *  axi_ad7616 is instantiated only for SI_OR_PI=1
+  *  spi_ad7616 is instantiated only for SER_PAR_N=1
-  *  spi_ad7616 is instantiated only for SI_OR_PI=0
+  *  axi_ad7616 is instantiated only for SER_PAR_N=0
-=== GPIO signals ===
+==== GPIO signals ====
 Ps7 EMIO offset = 54

Wiki