Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий
This version is outdated by a newer approved version.DiffThis version (29 Aug 2019 18:03) was approved by Brian OLoughlin.The Previously approved version (29 Aug 2019 17:52) is available.Diff

This is an old revision of the document!

Table of Contents

AD-FMCOMMS8-EBZ User Guide

Available late 2019

The AD-FMCOMMS8-EBZ is an integrated RF design based on the Analog Devices ADRV9009. It includes:

  • Two ADRV9009 devices, providing (in total):
    • Quad transmitters
    • Quad receivers
    • Quad input Observation Receiver for DPD
    • Max Rx BW: 200 MHz
    • Max Tunable Tx synthesis BW: 450 MHz
    • Max Observation Rx BW: 450MHz
    • Fully integrated fractional-N RF synthesizers
    • Multi-chip phase synchronization for all RF LO and baseband clocks
    • Tuning range: 75 MHz to 6000 MHz
    • FMC HPC Compatible interface
    • Complies with VITA 57.1 mechanical dimensions 84mm x 69mm(not full compliance with keep out areas)

The AD-FMCOMMS8-EBZ can be used as a standalone evaluation board for testing and developing applications for dual ADRV9009 transceivers with a compatible FPGA development board. Additionally it can be used with the ADRV9009-ZU11EG RF-SOM system to give an additional 4 Transmit and Receive channels, allowing for full system frequency and phase synchronization, enabling a complete solution for complex multi-stream applications ensuring end-to-end deterministic latency. The ADRV9009 Transceivers include integrated LO and phase synchronization. Overall system frequency & phase synchronization is maintained with a clock tree structure using ADI high performance low jitter HMC7044 devices, making it ideal for applications requiring RF phase alignment with a large number of channels.

  • Platform development environment support includes Industry standard Linux Industrial I/O (IIO) Applications, MATLAB®, Simulink®, and GNU Radio, and streaming interfaces for custom C, C++, python, and C# applications
  • HDL reference designs and drivers to allow zero day development

Hardware

AD-FMCOMMS8-EBZ(Available late in 2019)

X-Grade Rev A Schematics

Getting Started

The following is leveraged directly from the ADRV9009-ZU11EG RF-SOM site.

  1. Quick Start Guides
    1. ADRV9009-ZU11EG Quick Start Guide
    2. Configure a pre-existing SD-Card
  2. Linux Applications
    1. IIO Scope
      1. ADRV9009/ADRV9008 IIO Scope View
      2. ADRV9009/ADRV9008 Control IIO Scope Plugin
      3. Advanced ADRV9009/ADRV9008 Control IIO Scope Plugin
    2. FRU EEPROM Utility
  3. Push custom data into/out of the ADRV9009
    1. Basic Data files and formats
    2. Stream data into/out of MATLAB
  4. Design with the ADRV9009
  5. Understanding the ADRV9009
    1. ADRV9009 Product page
    2. Full Datasheet and chip design package
    3. MATLAB Filter Wizard / Profile Generator for ADRV9009
  6. Hardware in the Loop / How to design your own custom BaseBand
    1. GNU Radio
    2. Board Support Package for MathWorks Tools
  7. Design with the ADRV9009-ZU11EG based platform
    1. Linux software
      1. ADRV9009/ADRV9008 Linux Device Driver
        1. ADRV9009/ADRV9008 Device Driver Customization
        2. Customizing the devicetree on the target
      2. HMC7044 Clock Jitter Attenuator with JESD204B Linux Driver
      3. AXI-DMAC DMA Controller Linux Driver
      4. JESD204B Transmit Linux Driver
        1. JESD204B Status Utility
      5. JESD204B Receive Linux Driver
        1. JESD204B Status Utility
      6. AXI JESD204B GT HDL Linux Driver
        1. JESD204 Eye Scan
      7. AXI ADC HDL Linux Driver
      8. AXI DAC HDL Linux Driver
    2. ADRV9009/ADRV9008 No-OS System Level Design Setup
    3. HDL Reference Design
resources/eval/user-guides/ad-fmcomms8-ebz.1567094577.txt.gz · Last modified: 29 Aug 2019 18:02 by Brian OLoughlin

Page Tools