Differences

This shows you the differences between two versions of the page.

--- resources:eval:user-guides:ad-fmcomms6-ebz [03 Nov 2016 10:42] – [AD-FMCOMMS6-EBZ User Guide] change "a pass band flatness of +/- 1.0 dB" Lucian Sin
+++ resources:eval:user-guides:ad-fmcomms6-ebz [03 Jan 2021 22:04] (current) – fix links Robin Getz
@@ Line 1: / Line 1: @@
 ====== AD-FMCOMMS6-EBZ User Guide ======
-The [[http://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD-FMCOMMS6-EBZ.html|AD-FMCOMMS6-EBZ]] eval board is a 400MHz to 4.4GHz receiver based on the [[adi>AD9652]] dual 16bit analog to digital converter, the [[adi>ADL5566]] High Dynamic Range RF/IF Dual Differential Amplifier and the [[adi>ADL5380]] quadrature demodulator.
+The [[adi>en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD-FMCOMMS6-EBZ.html|AD-FMCOMMS6-EBZ]] eval board is a 400MHz to 4.4GHz receiver based on the [[adi>AD9652]] dual 16bit analog to digital converter, the [[adi>ADL5566]] High Dynamic Range RF/IF Dual Differential Amplifier and the [[adi>ADL5380]] quadrature demodulator.
 This is an I and Q demodulation approach to direct convert (also known as a homodyne or zero IF) receiver architecture. Direct conversion radios perform just one frequency translation compared to a super-heterodyne receiver that can perform several frequency translations. One frequency translation is advantageous because it:

Wiki