This version (11 Apr 2019 15:54) was approved by Srikanth Pagadarai.The Previously approved version (10 Nov 2015 17:23) is available.Diff

RF Blockset Model of AD9361 from MathWorks

There are two RF Blockset models of AD9361 provided by MathWorks in the form of a support package. These two models have been validated in the lab with real-life measurements, by which you can iterate and evaluate the design prior to implementation.

In order to run the RF Blockset models, your MATLAB license needs to include the following components:

  • MATLAB (R2014a and beyond)
  • Simulink
  • Simscape
  • RF Toolbox
  • RF Blockset
  • Stateflow
  • Signal Processing Toolbox
  • DSP System Toolbox
  • Communications System Toolbox
  • Fixed-Point Designer


To learn more about AD9361 modeling and to download the Tx and Rx models, the support package can be found here:

  • On this page, find the installer file (.mlpkginstall file) for RF Blockset Models, as highlighted in the figure below. Open the installer file from your operating system or from within MATLAB will initiate the installation process and acquire the latest models available for the release you have.

Block diagram

For more information about support package, please refer to Support Package Installation.

Comments and Feedback

Please visit the MATLAB Central page to provide your ratings, comments and feedback: MATLAB Central


If you have any questions about these models, please contact MathWorks Technical Support.

resources/eval/user-guides/ad-fmcomms2-ebz/software/simrf.txt · Last modified: 21 Feb 2018 14:40 by Noam Levine