This version is outdated by a newer approved version.DiffThis version (08 Feb 2021 16:21) was approved by Adrian Costina.The Previously approved version (02 Nov 2016 13:29) is available.Diff

This is an old revision of the document!

AD-FMCOMMS1-EBZ Quick Start Guides

AD-FMCOMMS1-EBZ support has been discontinued. This website is for legacy purpose only. Latest release is 2016_R1

The Quick Start Guides provide a simple step by step instruction on how to do an initial system setup for the AD-FMCOMMS1-EBZ on various FPGA development boards. They will discuss how to install the bitstream and how to boot a Linux distribution and give an basic introduction to the tools available.

Quick Start Guides are available for

FMCOMMS1 on Zed board running linux

If you are looking for a quick check on the hardware, you may use the No-OS software. You will need to build the bit file then use the no-os sources to generate the elf file.

resources/eval/user-guides/ad-fmcomms1-ebz/quickstart.1612797697.txt.gz · Last modified: 08 Feb 2021 16:21 by Adrian Costina