Wiki

Below is the source of this page. To edit this source as well as other pages on the wiki, you must login.

===== AD-FMCOMMS1-EBZ Quick Start Guides =====
{{page>/wiki/common#retired&nofooter&noheader}}

The Quick Start Guides provide a simple step by step instruction on how to do an initial system setup for the [[adi>en/evaluation/eval-fmcomms/eb.html|AD-FMCOMMS1-EBZ]] on various FPGA development boards. They will discuss how to install the bitstream and how to boot a Linux distribution and give an basic introduction to the tools available.

Quick Start Guides are available for
  * [[.:quickstart:microblaze_kc705|Linux on KC705, VC707]]
  * [[.:quickstart:zynq|Linux on ZC702, ZC706, ZED]]
  * [[.:quickstart:no_OS_microblaze|no-OS Drivers]]

{{:resources:fpga:xilinx:fmc:ad-fmcomms1-ebz:xcomm_zed_linux.jpg?800|FMCOMMS1 on Zed board running linux}}

If you are looking for a quick check on the hardware, you may use the [[.:software:baremetal|No-OS software]]. You will need to build the bit file then use the no-os sources to generate the elf file.

Analog Devices Wiki

Page Tools