Differences

This shows you the differences between two versions of the page.

--- resources:eval:user-guides:ad-fmcomms1-ebz:introduction [14 Dec 2012 15:24] – update nav Lars-Peter Clausen
+++ resources:eval:user-guides:ad-fmcomms1-ebz:introduction [09 Feb 2021 16:03] (current) – add retired Robin Getz
@@ Line 1: / Line 1: @@
 ====== AD-FMCOMMS1-EBZ Introduction ======
+{{page>/wiki/common#retired&nofooter&noheader}}
 The [[adi>en/evaluation/eval-fmcomms/eb.html|AD-FMCOMMS1-EBZ]] high-speed analog module is designed to showcase the latest generation high-speed data converters.  The [[adi>en/evaluation/eval-fmcomms/eb.html|AD-FMCOMMS1-EBZ]] provides the analog front-end for a wide range of compute-intensive FPGA-based radio applications.
@@ Line 10: / Line 11: @@
 {{  :resources:fpga:xilinx:fmc:dscn1188.png?direct&400  |FMComms + Zynq Board}}
-<WRAP alert>The AD-FMCOMMS1-EBZ FMC Card is not fully ANSI/VITA 57.1 compatible:
+<WRAP alert round>The AD-FMCOMMS1-EBZ FMC Card is not fully ANSI/VITA 57.1 compatible:
   * does not meet the mechanical form factor (too tall, too long),
 It was designed, and meets the needs of prototyping platforms, and will work with FPGA Development systems which include an FMC connector. It may not mechanically fit on other ANSI/VITA 57.1 carrier cards.</WRAP>
@@ Line 38: / Line 39: @@
   * Common I<sup>2</sup>C access for all device registers
-{{navigation AD-FMCOMMS1-EBZ#none#.:|Overview#quickstart|Quick Start Guides}}

Wiki