Differences

This shows you the differences between two versions of the page.

--- resources:eval:user-guides:ad-fmcomms1-ebz:hardware:configuration_options [15 Jan 2013 15:16] – add some info on the Pi Attenuation Robin Getz
+++ resources:eval:user-guides:ad-fmcomms1-ebz:hardware:configuration_options [09 Feb 2021 16:07] (current) – add retired Robin Getz
@@ Line 1: / Line 1: @@
 ====== AD-FMCOMMS1-EBZ Configuration Options ======
+{{page>/wiki/common#retired&nofooter&noheader}}
 There is one main configuration which needs to be made during use of the [[../../AD-FMCOMMS1-EBZ]] - to use or not to use the RF section. When not using the RF section of the board, the analog interface is directly to the ADC inputs and DAC outputs. (The RF section is not powered down, so it still consumes the same amount of power).
@@ Line 111: / Line 111: @@
 The default build of these attenuators is 0dB attenuation. (2 resistors are //Do Not Insert// and the remaining is a 0 ohm.)
-{{navigation AD-FMCOMMS1-EBZ#Card Specification#.:|Hardware#none}}

Wiki