Differences

This shows you the differences between two versions of the page.

--- resources:eval:user-guides:ad-fmcmotcon1-ebz:introduction [10 Feb 2014 22:14] – [Where to Buy] Andrei Cozma
+++ resources:eval:user-guides:ad-fmcmotcon1-ebz:introduction [10 Feb 2021 04:39] (current) – add retired Robin Getz
@@ Line 1: / Line 1: @@
-====== ADI FMC Motor Control Introduction ======
+====== ADI FMC Motor Drive System Introduction ======
+{{page>/wiki/common#retired&nofooter&noheader}}
-**The ADI FMC motor control solution consist of the following products**
+**The ADI FMC motor drive solution solution consist of the following products**
   * **[[resources/eval/user-guides/ad-fmcmotcon1-ebz/hardware/controller_board|AD-FMCMOTCON1-EBZ]]** - Controller board. Compatible with all Xilinx FPGA platforms with FMC LPC or HPC connectors.
   * **[[resources/eval/user-guides/ad-fmcmotcon1-ebz/hardware/lv_board|AD-DRVLV1-EBZ]]** - Low voltage drive board. Connects to the Controller board and has a power stage that can drive drive Brushed DC / BLDC / PMSM / Stepper motors up to 48V and 18A.
-  * **[[resources/eval/user-guides/ad-fmcmotcon1-ebz/hardware/dyno|AD-DYNO1-EBZ]]** - Dynamo-meter drive system. Acts as an electronically adjustable load with two BLDC motors connected in a dyno setup.
+  * **[[resources/eval/user-guides/ad-fmcmotcon1-ebz/hardware/dyno|AD-DYNO1-EBZ]]** - Dynamometer drive system. Acts as an electronically adjustable load with two BLDC motors connected in a dyno setup.
 |< 100% 33% 33% 34% >|

Wiki