This version is outdated by a newer approved version.
This version (28 Jan 2021 19:59) was approved by Robin Getz.The Previously approved version (25 Feb 2014 10:30) is available.
This version (28 Jan 2021 19:59) was approved by Robin Getz.The Previously approved version (25 Feb 2014 10:30) is available.This is an old revision of the document!
Table of Contents
Motor Control Hardware
Hardware solutions
- AD-FMCMOTCON1-EBZ - Controller board.
- Compatible with all Xilinx FPGA platforms with FMC LPC or HPC connectors
- 2 x Gbit Ethernet PHYs for high speed industrial communication
- Hall + Differential Hall + Encoder + Resolver interfaces
- Current and voltage measurement using isolated ADCs
- Xilinx XADC interface
- Fully isolated control and feedback signals
- AD-DRVLV1-EBZ - Low voltage drive board.
- Connects to the Controller board and has a power stage that can drive drive Brushed DC / BLDC / PMSM / Stepper motors up to 48V and 18A.
- Integrated over current protection
- Current measurement using isolated ADCs
- Bus voltage, phase currents and total current analog feedback signals
- PGAs to maximize the current measurement input range
- BEMF zero cross detection for sensorless control of PMSM or BLDC motors
- AD-DYNO1-EBZ - Dynamometer Drive System.
- Two BLDC motors connected in a dyno setup
- Electronically adjustable load – the load value is set using the onboard buttons + LCD
- Programmable step and ramp load changes
- Measurement and display of load motor phase currents
- Measurement and display of load motor speed
- External control using Analog Discovery
Where to Buy
Downloads
AD-FMCMOTCON1-EBZ
- Allegro Board File (This file is compressed). Get the Allegro FREE Physical Viewer (You need 16.5 or higher).
AD-DRVLV1-EBZ
- Allegro Board File (This file is compressed). Get the Allegro FREE Physical Viewer (You need 16.5 or higher).
Navigation - AD-FMCMOTCON1-EBZ
resources/eval/user-guides/ad-fmcmotcon1-ebz/hardware.1611860193.txt.gz · Last modified: 28 Jan 2021 19:56 by Robin Getz