This version is outdated by a newer approved version.
This version (05 Apr 2018 10:01) was approved by Alexandra Banut.The Previously approved version (19 Nov 2015 17:06) is available.
This version (05 Apr 2018 10:01) was approved by Alexandra Banut.The Previously approved version (19 Nov 2015 17:06) is available.This is an old revision of the document!
Table of Contents
Introduction
The AD-FMCDAQ3-EBZ module is comprised of the AD9680 dual, 14-bit, 1.25 GSPS, JESD204B ADC, the AD9152 dual, 16-bit, 2.5 GSPS, JESD204B DAC, the AD9528 clock, and power management components. It is clocked by an internally generated carrier platform via the FMC connector, comprising a completely self contained data acquisition and signal synthesis prototyping platform. In an FMC footprint (84 mm × 69 mm), the module’s combination of wideband data conversion, clocking, and power closely approximates real-world hardware and software for system prototyping and design, with no compromise in signal chain performance. For additional information or to purchase the AD-FMCDAQ3-EBZ, please visit: www.analog.com-AD-FMCDAQ3-EBZ
Features
- Includes schematics, layout, BOM, Gerber files, HDL, Linux® drivers, IIO Oscilloscope, VisualANALOG,…
- FMC-compatible form factor
- Powered from single FMC connector
- Provides two channels of ADC and two channels of DAC with full synchronization capabilities
AD9680-1250 ADC
- JESD204B (subclass 1) 4-lane coded serial digital outputs
- SFDR: 80 dBc at 1.0 GHz AIN, 1.0 GSPS
- Noise density: –154 dBFS/Hz @ 1.0 GSPS
- 2 GHz of usable analog input full power bandwidth
- Two integrated DDCs per channel
AD9152 DAC
- JESD204B (subclass 1) coded serial digital outputs
- Supports complex signal bandwidths up to 800 MHz
- 6-carrier GSM IMD = 75 dBc at 75 MHz IF
- SFDR = 85 dBc (BW = 300 MHz) at DC IF
- Selectable 2×, 4×, 8× interpolation filters
Applications
- Electronic test and measurement equipment
- General-purpose software radios
- Radar systems
- Ultra wideband satellite receivers
- Signals intelligence (SIGINT)
- Point to point communication systems
- DOCSIS 3.0 CMTS and HFC networks
- Multiple input/multiple output (MIMO) radios
- Automated test equipment
Navigation - AD-FMCDAQ3-EBZ
resources/eval/user-guides/ad-fmcdaq3-ebz/introduction.1522915275.txt.gz · Last modified: 05 Apr 2018 10:01 by Alexandra Banut