Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
resources:eval:user-guides:ad-fmcdaq2-ebz:testing [04 May 2019 20:00]
Mihai Bancisor [Creating an SD test card]
resources:eval:user-guides:ad-fmcdaq2-ebz:testing [09 Jan 2021 00:32]
Robin Getz user interwiki links
Line 23: Line 23:
 This section requires checking the [[./​hardware#​downloads|schematics]]. Specifically,​ sheet 7 shows how the AD7291 is connected. 1% resistors connect various voltages, and things are divided down to ensure that the voltage levels don't exceed full scale. This section requires checking the [[./​hardware#​downloads|schematics]]. Specifically,​ sheet 7 shows how the AD7291 is connected. 1% resistors connect various voltages, and things are divided down to ensure that the voltage levels don't exceed full scale.
  
-The explanation of how the valid ranges are calculated is similar to the same tests for the [[http://​wiki.analog.com/​resources/​eval/​user-guides/​ad-fmcomms2-ebz/​testing|FMComms boards]].+The explanation of how the valid ranges are calculated is similar to the same tests for the [[/​resources/​eval/​user-guides/​ad-fmcomms2-ebz/​testing|FMComms boards]].
 ==== Signals ==== ==== Signals ====
  
resources/eval/user-guides/ad-fmcdaq2-ebz/testing.txt · Last modified: 09 Jan 2021 00:32 by Robin Getz