Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

resources:eval:user-guides:ad-fmcadc3-ebz:quickstart [28 Aug 2015 08:37] – created Dragos Bogdanresources:eval:user-guides:ad-fmcadc3-ebz:quickstart [28 Aug 2015 13:10] (current) – Add a typical setup image. Dragos Bogdan
Line 22: Line 22:
 In most carriers, the AD-FMCADC3-EBZ board connects to the HPC connector (unless otherwise noted).  In most carriers, the AD-FMCADC3-EBZ board connects to the HPC connector (unless otherwise noted). 
 The carrier setup requires power, UART (115200), ethernet (Linux), HDMI (if available) and/or JTAG (no-OS) connections.  The carrier setup requires power, UART (115200), ethernet (Linux), HDMI (if available) and/or JTAG (no-OS) connections. 
 +A typical setup is shown below.
  
 +{{ :resources:eval:user-guides:ad-fmcadc3-ebz:software:linux:ad-fmcadc3-ebz_zc706.png?800 |}}
resources/eval/user-guides/ad-fmcadc3-ebz/quickstart.txt · Last modified: 28 Aug 2015 13:10 by Dragos Bogdan