Wiki

This version is outdated by a newer approved version.DiffThis version (24 Jun 2011 12:26) was approved by Jean McAdam.

This is an old revision of the document!


BeMicro-SDP

Preface

The BeMicro-SDP Interposer board is an adaptor that allows Arrow’s BeMicro SDK USB stick to connect to all daughter boards on the SDP Platform. The BeMicro-SDP Interposer provides embedded FPGA system developers the chance to prototype their FPGA + ADI data converter, mixed signal or RF system concept quickly and easily.

Product Overview


Fig 1 : BeMicro-SDP Adapter Board


The BeMicro-SDP Interposer routes signals from the BeMicro SDK to the SDP daughter board. There is no additional logic on board. There is a mating edge connector for the BeMicro SDK and a 120 pin connector header for connecting to the SDP daughter boards.

The BeMicro SDK, developed by Arrow in association with Altera, is a complete soft core embedded processor evaluation system on a USB stick. It makes embedded FPGA design simpler and easier. The BeMicro-SDP Interposer offer unparalleled design flexibility and protection against processor obsolescence in an easy-to-use USB platform that’s ready to go as soon as it’s plugged in.

The complete setup is shown below.

 BeMicro-SDP seperate
Fig 2 : BeMicro-SDP seperate

 BeMicro-SDP combined
Fig 3 : BeMicro-SDP combined

resources/eval/sdp/bemicro_sdp.1308911166.txt.gz · Last modified: 24 Jun 2011 12:26 by Jean McAdam