Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
resources:eval:eval-adm2795e-ardz [26 Jan 2018 10:36] – Richard Anslowresources:eval:eval-adm2795e-ardz [26 Jan 2018 10:40] (current) – Richard Anslow
Line 43: Line 43:
 ----- -----
 ===== Isolated Motor Control System using Arduino Form Factor Rapid Development Platforms ===== ===== Isolated Motor Control System using Arduino Form Factor Rapid Development Platforms =====
 +\\In this set-up the stimulus from an ultrasonic sensor at one end of the RS-485 bus controls a motor and gearing or fan assembly at the far end of the bus. 
 +The EVAL-ADICUP-360 Arduino form factor compatible ARM Cortex-M3 Development Platform accepts inputs from a standard ultrasonic sensor. 
 +The EVAL-ADICUP-360 outputs are used to control the EVAL-ADM2795EARDZ logic signals. The first EVAL-ADM2795EARDZ then transmits to a second EVAL-ADM2795EARDZ node over 10 meters of RS-485 Category 5e cable. 
 +On the far end of the bus, the second receiving EVAL-ADM2795EARDZ, EVAL-ADICUP-360, and Arduino Motor control shield and provide output to a standard industrial motor. Sample Arduino code for the transmitting and receiving RS-485 nodes is located at the end of this Wiki guide.\\
 {{:eval-adm2795e-ardz_isolation_example.png?nolink&600|}} {{:eval-adm2795e-ardz_isolation_example.png?nolink&600|}}
  
 {{:eval-adm2795e-ardz_demo.png?nolink&800|}} {{:eval-adm2795e-ardz_demo.png?nolink&800|}}
  
-\\ In this set-up the stimulus from an ultrasonic sensor at one end of the RS-485 bus controls a motor and gearing or fan assembly at the far end of the bus. +
-The EVAL-ADICUP-360 Arduino form factor compatible ARM Cortex-M3 Development Platform accepts inputs from a standard ultrasonic sensor. +
-The EVAL-ADICUP-360 outputs are used to control the EVAL-ADM2795EARDZ logic signals. The first EVAL-ADM2795EARDZ then transmits to a second EVAL-ADM2795EARDZ node over 10 meters of RS-485 Category 5e cable. +
-On the far end of the bus, the second receiving EVAL-ADM2795EARDZ, EVAL-ADICUP-360, and Arduino Motor control shield and provide output to a standard industrial motor. Sample Arduino code for the transmitting and receiving RS-485 nodes is located at the end of this Wiki guide.+
  
 ------ ------
Line 74: Line 74:
  
 *Application Note: http://www.analog.com/media/en/technical-documentation/application-notes/AN-1398.pdf *Application Note: http://www.analog.com/media/en/technical-documentation/application-notes/AN-1398.pdf
- 
  
 ----------- -----------
resources/eval/eval-adm2795e-ardz.txt · Last modified: 26 Jan 2018 10:40 by Richard Anslow

Page Tools