Differences

This shows you the differences between two versions of the page.

--- resources:eval:dpg:ad974x-dpg2-ebz [15 Feb 2022 02:23] – [Software Needed:] Melissa Lorenz Lacanlale
+++ resources:eval:dpg:ad974x-dpg2-ebz [07 Jun 2023 02:20] (current) – James Peevee Salenga
@@ Line 40: / Line 40: @@
 =====Quick Start Guide=====
-  - Make sure than on AD9743-DPG2-EBZ/AD9745-DPG2-EBZ/AD9746-DPG2-EBZ/AD9747-DPG2-EBZ, JP4, JP5, JP6, and JP7 are configured such that IOUTxP and IOUTxN are connected to the corresponding baluns (T7, T8), and R39 and R41 are installed. Refer to Figure 5a.
+  - Make sure than on AD9743-DPG2-EBZ/AD9745-DPG2-EBZ/AD9746-DPG2-EBZ/AD9747-DPG2-EBZ, JP4, JP5, JP6, and JP7 are configured such that IOUTxP and IOUTxN are connected to the corresponding baluns (T7, T8), and R39 and R40 are installed. Refer to Figure 5a.
   - Attach the evaluation board to SDP-H1 FMC connector using the AD-DAC-FMC-ADP adapter board. Connect continuous wave generator for clock input to J1 and DAC output from J8 to a signal/spectrum analyzer. Connect the evaluation board to PC via USB and to a 5V 1A power supply via banana plug cables. Refer to Figure 1.
   - Connect SDP-H1 to PC via USB and to a 12V 1A power supply.

Wiki